Ask everyone, dear ones car horn that got into the water, is it still there? It s not ringing, tha

If the horn doesn't go off, it doesn't make much sense to repair it, and it's not very expensive to replace it with a new one.

The first paragraph of the first chapter of Dream of Red Mansions is the preface of Cao Xueqin [4] . In this preface, Cao Xueqin appears as a real person and tells readers about the origin of writing. According to his own account, he wrote this book based on the old dream of prosperity that he experienced in Nanjing in his early years.

Because he was living in the western suburbs of Beijing, doing nothing and achieving nothing, he suddenly recalled all the girls in the family when he was young, and felt that their knowledge and talent far exceeded his own, and he couldn't help but regret it. When he was in the blessings, he did not do his job properly and did not obey the discipline of his parents and teachers, so that when he grew up, he had no skills and half his life was ruined. Cao Xueqin wrote this experience and repentance as **, just to tell readers that although their sins are unavoidable, those girls are real people in life, and their deeds must not be annihilated in order to cover up their crimes.

As soon as I think of this, my heart is rippling, and all difficulties are not a problem. What's more, the rural life is leisurely and the scenery is pleasant, which makes him think like a spring and write like a god. Cao Xueqin is humble and shallow, so she has to write this ** in the vernacular of the market, which is intended to set up a biography for those girls, relieve her own boredom, and provide readers with fun and appreciation.

The water ingress of the car horn can be carried out by drying it with a hair dryer, disassembling and cleaning, and replacing it.

Generally, when the degree of water ingress into the horn is not very serious, we can wait for the water in the horn to evaporate naturally. When the water inside the horn evaporates, the sound of the horn will return to its original state.

However, if the horn is seriously flooded, we can do the following:

1. Hair dryer drying: For the horn that is located outside and can be directly reached by the hair dryer, we can use the hair dryer to heat the moisture inside it to promote its rapid evaporation. Of course, when the water evaporates, the sound returns to its original state.

2. Disassembly and cleaning: directly disassemble the horn and clean up the moisture inside it carefully. Since the horns of most vehicles are located inside the bumper, it is difficult to remove the horn without removing the bumper.

Therefore, disassembly and cleaning should be carried out in a professional 4S store.

3. Replacement treatment: For the horn damage caused by serious water ingress, we can only deal with it by replacing it.

Precautions for water ingress of car horns:

Try to install the position of the horn a little higher, and be sure to go down 60 degrees of oblique, this position is recognized by all car owners as the best position, because this can not only effectively prevent the car horn from entering the water, even if the water is in, it can also flow out by itself without accumulating in the horn.

Find a board with good waterproof performance, if you can't find it, you can use a general plastic plate, and fix the board on the bumper under the horn and the neutral gear in front of the left front wheel, which can effectively block the water splashed by the wheel.

If it is a basin-shaped horn, there should be no problem, if it is a snail, it is estimated that it will not hit, and the life of the snail horn is relatively short. Both horns have an adjustment device, but they won't last long after adjustment.

Ways to deal with water ingress from car horns:

1. The best way is to open it to dry and let the water in it volatilize by itself, otherwise it will cause a short circuit in the line after a long time.

2. In the case of not much water intake, disassemble the horn and install it back after the water control is dry, but be careful not to lose the parts when installing it back.

3. Use a hair dryer to heat the horn to evaporate the water in the horn, and the horn will recover after the water evaporates. However, if the diaphragm of the horn itself is damaged due to water ingress, it can only be replaced with a new one.

Precautions in the use of car horns:

1. When washing the car, remember to prevent the horn from getting wet, and dry it with an air gun as soon as possible.

2. Try not to always press the horn for a long time, which is easy to cause premature ablation of the horn contacts.

3. If the horn fails, try to seek the help of a professional maintenance technician, and do not blindly replace the horn, which is easy to cause unnecessary waste.

The solution to the stuffiness of the car horn is as follows:1. Open it to dry and let the water in it volatilize by itself, otherwise it will cause a short circuit in the line after a long time;

2. In the case of not much water intake, disassemble the horn and install it back after the water control is dry;

3. Use a hair dryer to heat the horn to evaporate the water in the horn, and the horn will recover after the water evaporates, but if the diaphragm of the horn itself is damaged due to water ingress, it can only be replaced.

Precautions: When washing the car, remember to prevent the horn from getting wet, and dry it with an air gun as soon as possible if you find that the horn is flooded; Try not to always press the horn for a long time, which is easy to cause premature ablation of the horn contacts; If the horn fails, try to seek the help of a professional maintenance technician, and do not blindly replace the horn, which is easy to cause unnecessary waste.

After the car passes through the low-lying water altar, the sound of the horn becomes smaller, usually in this case, the degree of water ingress into the horn is not very serious, you can do not need to do too much treatment, and the water in the horn can evaporate naturally. When the water inside the horn evaporates, the sound of the horn returns to its original state.

If the water ingress is serious, directly disassemble the horn and clean the moisture inside it carefully. Since the horn of most vehicles is located inside the bumper, if the bumper is not removed, it is difficult to disassemble the horn, so the disassembly and cleaning should go to the professional 4S shop for damage, for the horn damage caused by serious water ingress, can only be processed by replacing parts, if it is helpful to you, I hope you, thank you.

Remove it and blow it with a hair dryer.

Car horn into the water, should be a good horn to dry it first and then wipe it clean with a rag, so that the probability of bad will be greatly reduced, at the same time, of course, the horn has good and bad, to a bad dozens of dollars, of course, I never buy things will not buy bad, so it has been good to feel distressed, and the loss of hundreds, but are small amounts, but if you encounter these problems can solve them yourself, it is better than spending money.

Replace the horn and dry the diaphragm How the circuit is not burned is very simple How the circuit is burned Change the circuit handle.

It is recommended that you go to a repair shop to get it repaired! Wishing you happiness!

Take it out and dry it, or wait for it to dry, or change it to a pair.

It's good to wait until it's done, there's no good way.

The car horn has been ringing all the time.

The car horn will continue to ring after being flooded, which will not only affect driving safety, but also disturb people. So, what should be done?

First of all, you need to find the location of the horn. Generally, the horn is located under the hood at the front or rear of the vehicle or above the bumper next to the wheels. Once the horn is found, the power supply needs to be cut off to avoid a short circuit that may cause the vehicle**.

Next, it is recommended to use a vacuum cleaner or dryer to absorb the moisture inside the horn, which can avoid the failure of the horn due to the residue of moisture in the stuffy skin. If there is a lot of moisture, you can remove the horn, wipe it clean with a high hood and dry towel, and then place it in a ventilated and dry place to dry.

If the speaker still rings after the above methods, it may be because moisture has entered the circuit board of the horn, causing the circuit board to malfunction. This situation requires a more professional repair, and it is advisable to take the vehicle to a workshop for inspection and repair.

In short, it is a common fault that the car horn keeps ringing, and it is not difficult to deal with it, you just need to deal with it in time and pay attention to safety.