Why can I only connect one person with telecom Internet access in the dormitory?

If you want multiple people to share the network, you need to install a router.

If the router settings do not meet the network requirements, you can reset the router. Here's how:

1. Connect the home network cable to the WAN port of the router.

2. Use another network cable to connect one end to the computer, and the other end to connect the routing LAN port (the LAN port is the interface marked on the route).

3. Turn on the computer, open the browser, and enter the route login IP in the address bar.

4. Enter the route login and password in the pop-up dialog box, if you don't know the route login IP, login and password, you can turn the route over and look at it, and write it on the back of the route.

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface, which is pppoe, and enter the Internet access and password.

6. After the settings are complete, save the exit and restart the route.

After the routing restart is complete, the routing hardware connection and setup are complete.

Let's take a look at what brand of router it is, generally TP Link.

Modem access router, four host network cable access routes.

Different routes enter the settings slightly differently, and some of the routers have the initial login account password written (note that it is used to enter the router settings, not that it is not the account password for surfing the Internet).

Generally, it is to open the browser address and enter, enter the router login account password, and then find the setting method of the corresponding router model on the Internet, which cannot be explained here, and generally set the account password to connect to ADSL inside, and save it OK.

The router will automatically connect to the Internet, and all four computers don't need to dial up, just connect to the router.

In order to make a profit, the school has assigned a virtual fixed IP to each computer, and similarly, it will also bind the network card address. You know the Internet access procedures, and if so, go buy a router.

Routing settings Internet access, password, and finally set 1 DHCP to automatically assign IP, the local computer can use to automatically obtain IP....

It's hard to say. Some schools do not have a router connection to the network. In this case, you can actually use portable wifi to solve the problem, but there is a disadvantage that there is a computer that has to be turned on all the time, and other devices must have wifi.

It can be used as long as that person agrees.

The purpose is not to allow users to share the Internet with multiple machines.

The operator binds the MAC physical address of the network card MAC on the computer, or tablet, or mobile phone used by the initial user, that is to say, the terminal is bound first, the purpose is not to allow users to share the Internet with multiple machines, but this binding is technically low-level, and it can only clone the bound MAC in the route, and it is easy to break through the limit, in fact, all user routes are used to clone MAC to share the Internet.

You can ask what certification the school telecommunications network uses, and now some routers have integrated the certification into the system, that is, it can be shared, otherwise it can only be shared by a computer, obviously too troublesome, after asking clearly, go online to see which routers, at present, there should be several third-party certifications for polar routes, you can take a look.

The router defaults to a static IP, one device is used, other devices do not have an IP, to enable DHCP automatic IP assignment rules, set the IP address range (between 2 254).For example, so that only 2 devices can access the Internet normally, and the other devices have no available IPOn the back of the wireless router or in the manual, there will be the IP address of your router, log in and look for it, there will be many devices in it at the same time, unless you don't know the password or set the MAC permission of the corresponding machine.

The operator binds the MAC physical address of the network card MAC on the computer, or tablet, or mobile phone used by the initial user, that is to say, the terminal is bound first, the purpose is not to allow users to share the Internet with multiple machines, but this binding is technically low-level, and it can only clone the bound MAC in the route, and it is easy to break through the limit, in fact, all user routes are used to clone MAC to share the Internet. It's easy to set up, but you need to be able to set it up, and it is recommended to find a friend who understands it to help you!

No, telecom campus broadband is limited in terms of bandwidth, if you can, you can install a multi-level router, welcome to adopt.

The operator binds the MAC physical address of the network card MAC on the computer, or tablet, or mobile phone used by the initial user, that is to say, the terminal is bound first, the purpose is not to allow users to share the Internet with multiple machines, but this binding is technically low-level, and it can only clone the bound MAC in the route, and it is easy to break through the limit, in fact, all user routes are used to clone MAC to share the Internet.

Five wireless router can be selected, and if you want to connect to the network cable, there are four network ports to connect to.

Six of us in the dormitory used a wireless one.

You can use the cat + wireless routing directly, the cat does not need to be set up, the router setting is also very simple, you can call the person who runs the broadband to help you, and the wireless routing can add a password to prevent others from stealing your network and robbing your bandwidth. If you use a wired one, connect directly to each computer, and set up autodialing in the router.

The wireless modem must have a routing function, and it is not possible to use wireless routing alone.

It is recommended that you follow these steps:

1。Disconnect the router from the telecom cats first, 2. Unplug the end of the computer that was originally connected to the cat and plug it into the LAN port of the router (the light with a number will turn on).

3。The wireless router ensures that the factory settings are protected from the effects of previous settings. Log in to the router, 19216811 or 19216801, enter it correctly in IE and log in to the router according to the manual.

4。Go to the router settings page to skip the wizard and go directly to the LAN port settings, change the LAN port address of the router to save and restart the router. Note that you can use it when you log in to the router in the future, instead of using 19216811

5。After restarting, connect the network cable out of the cat to the WAN port of the router, use it into the router settings page, and then skip the wizard directly to the WAN port settings, select dynamic IP for the connection type, save it and see if the WAN port obtains the IP address after saving the router running status (generally wait for 5 minutes), and then try whether the computer can open the web page, if the connection is normal, then enter the router to set up the wireless part of the function, and the rest can be operated according to the manual.

6.Turn on DHCP, note that its network segment should be the last to remember to save every step and finally restart the router in the router settings.

If you need to buy a machine, please log in to Anhui Telecom Tianyi store, iPhone, Samsung, Xiaomi and other hundreds of mobile phones at low prices on the whole network.

Hope mine can get yours.

Then use wired routing... In addition, a minimum of 4 people in a dormitory. At the same time with lz will crash.。。。

Hello! Hopefully, the following will be helpful to you.

According to you, it's certain that this is a problem with your notebook itself. Please make sure that your laptop has multiple active NICs, generally the channel priority of wired NICs is higher than that of wireless NICs, it is recommended that you disable the physical NICs before trying when using your laptop for wireless access.

In addition, please check whether your wireless network is in the automatic IP acquisition state or fixed IP status, if your network settings are incorrect, this will also happen.

You are welcome to pay attention to the latest preferential activities announced by Anhui Telecom's online business hall and official Weibo.

If you still have questions, please keep asking. Have a great day, thank you!