Will the computer freeze and restart, will it burn the memory?

Memory is very uncorrupted. The inner pure strips of Kingston, ADATA genuine strips are guaranteed for life. The landlord touched a fake inner pure strip.,If there is no response when you turn it on, it's really a pure problem.。

You can exclude it in this way, first turn off the power, and then press the power on to discharge the residual power after turning off the power. Open the case and remove any memory module before turning it on. If it still doesn't light up, plug it in and remove the other one.

Which one is bright and which one is good. After the bad ones come down, you can check the authenticity on the Internet. The serial number above.

2G about a hundred、According to what you said,It should be a memory module problem,。 But it shouldn't be bad, you just unplug the memory module and plug it back in. Memory modules are less fragile.

Memory won't be corrupted so easily... It may be that the contact is not good, and the gold finger of the memory is used to eraser the sassafras to see.

The memory is generally not broken, and when the voltage is unstable, it is corrupted. A stabilized power supply must be installed when installing a computer.

You can't ** memory of the brand is good to it! Some memory will conflict with the motherboard! It is not recommended to use two pieces of memory!

It is estimated that there is a memory conflict!! You still go to the computer repair place to see it**The online may also be fake or refurbished Please be cautious when buying!!

Memory is generally not susceptible to breakage

Generally around 150!

I don't know what the specifications are.

1. The CPU is overloaded, or it is not working properly. Check CPU and graphics card cooling, dust removal, oiling, or replace fans.

Second, the power supply voltage is unstable and the power supply is insufficient. Replace high-quality, high-power power supplies.

3. Clean and defragment disks frequently.

1. In the "My Computer" window, right-click the drive letter you want to clean up - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

2. Clear the temporary file, start-run-enter "%temp%"-OK.

3. Clean up the registry and junk files with Optimizer or Super Bunny.

4. Close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods can be turned off in general.

5. Delete unused program software.

7. Reduce the burden of memory, do not open too many programs. If you have too many documents open or too many programs running at the same time, you will not have enough memory to run other programs, so you should close the programs and windows you don't use at any time.

4. Upgrade the graphics card and network card driver, and change to a higher-grade graphics card.

Fifth, increase the physical memory, now the memory is generally at least 2G.

6. Set up virtual memory reasonably.

1. To play games, the virtual memory can be set to be larger, and the maximum and minimum values are set to 2-3 times of the physical memory.

2. The method of setting virtual memory is: right-click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual memory change - Select the partition where the virtual memory (page file) is stored in the drive list - Custom size - Set the value in the "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.

3. The partition where the virtual memory (page file) is stored must have enough space, the hard disk resources are insufficient, resulting in insufficient virtual memory, in a computer, it is enough to set up virtual memory in a partition, and it is not necessary to set it in multiple partitions.

7. Optimize your computer with security software.

Reinstalling the system is a one-size-fits-all solution to computer problems.

It doesn't have to be bad, it could be a compatibility issue.

It is also possible that the memory capacity is large, resulting in an increase in virtual memory, and the hard disk occupied by virtual memory has bad sectors, and there are many possibilities.

It can only be excluded one by one.

Hello,According to the description, it should be caused by memory.,It's not that the memory is broken.,It should be that the memory is incompatible.,The memory is all parameters.,You need memory with the same parameters to use it together.,If you use DDR3 and DDR2, you can't use it.。

If the memory module is broken, the computer will not be able to directly enter the system interface, nor will it be able to pass the self-test screen (the screen that displays the letters when the computer is turned on). When it comes to the state as shown in the figure, it is generally a system problem, try to restore the system or reinstall it.

In this case, the owner can use compressed air or a small brush to clean up your memory card slot, plug in your memory gold finger, and see if it can be solved. Swap the two memories.

After the computer is turned on for a while, it is stuck because the memory is broken, or it is possible that there is a problem with the network. It is recommended to replace a memory module.

It may be that a certain software installed is not compatible with two memory, so you need to uninstall this software, or unplug one memory to try.

Not necessarily, it could also be a motherboard issue.

No, video memory.

At most, it will only jam into a slide, and failures such as crashing and restarting are more likely to be the graphics card driver.

The most common problem with an unmatched version is to use third-party software to update the driver indiscriminately.

Result in. The safest way is on the official website of the motherboard**Sound card, network card, chipset and other drivers (the first-line motherboard will provide this**), on the official website of the graphics card**Graphics card driver, if the official website of the graphics card does not provide it, there is only NVIDIA.

AMD this kind of GPU official website to go**,The new graphics card directly**The latest official version (stable version,Compared to the beta version or beta version),The old graphics card may have to be bothered,If you didn't save the old version of the graphics card driver,You can only turn the historical version of the official website and try it next to each other,Until the version that doesn't crash or restart。

Another problem is that if you install a higher version of the graphics card driver, before replacing the old version of the graphics card driver, you must use software such as DDU to clean up the driver, otherwise the residual files of the new driver may have a negative impact on the work of the old driver.

One: The host makes a Didi sound, it is the memory that is loose, and most of the memory problems are not able to open the machine! Or call the police! The machine is not lit because the common current chip of the memory is broken! The alarm is possible that your memory is not plugged in properly!

Two: There are more problems with the motherboard, there is no movement on the host start, no sound, but the key fan in the mind is not good for the whole thing, and it can't be turned on when it is turned on.

The BIOS appears when the computer is turned on

Three: The motherboard and hardware are not compatible, and the computer is always stuck.

Problems with motherboard installation, there will be problems too! Playing game cards, this is what my computer has seen!

The memory is broken, and the driver will hear the sound of Didi, which is quite loud, and it can't enter the system, so it can't be self-checked.

The fan turns, the optical drive is turned on and off to see if the optical drive can be connected to the power... As long as the power supply is powered, and the power supply of the case is connected to the cable of the optical drive, then the optical drive can be switched on and off, regardless of memory.

Good luck, friend!

There are many phenomena of memory failure, for example: the host does not light up, blue screen, crash, blurred screen, etc.! If the memory is broken, it will not cause the fan to not turn and the optical drive will not turn on, but there will be self-check!!

There will be no "drop" sound, no in, the memory is detected, the fan is still turning, and the optical drive can be turned on and off when there is power!

No, it can't be turned on, and there will be a sound alarm from Didi. Because all operations are connected to the outside world through memory, the boot system cannot put the operating system in the hard disk into the memory, so the computer cannot complete the self-test, and it will alarm as soon as it is turned on.

After turning on the machine for a while.

I was browsing the web and the computer suddenly crashed (maybe the web page opened a few more, and when the mouse clicked, the speed was a little faster).

There is also a lot of dust in the case.

I tried 2 RAM in turn, 4 slots as well.

2 do not swim the bank.

2 pieces of memory. 1 strip 2 generation 1G, (DDR2

667) 1 2 g of the second generation

DDR2800) are all Kingston's.

DDR2800) was replaced in a repair shop last month.

Hello! 1. It is recommended to clean up the dust of the chassis.

2. It may be that the memory roll balance is broken, not necessarily the memory is bad, you can use another machine to try the memory.

3. It is also possible that the CPU temperature is too high and it crashes, it is recommended that you check the CPU cooling fan.

4. Finally, it is recommended that the memory of different frequencies should not be used together, even if it is the same brand, the computer may not be able to boot due to compatibility problems, or the system is unstable, the system will default to reduce the frequency of high-frequency memory to low frequency (800 to 667).

It only represents a personal opinion, don't spray if you don't like it, thank you.

There are many reasons for the crash, and you have to find out the cause in order to solve the problem!

Causes of Computer Crash and Solutions:

1.Trojan horses or viruses in your computer, causing your computer to restart or crash;

Solution: Repair your computer with Defender and Antivirus.

2. The motherboard capacitor is missing, the memory module is damaged, the memory module is incompatible, the hard disk is faulty, the CPU is overheated, etc.;

Solution: Non-professionals are advised to send it for repair.

3. Interrupt conflict, incorrect software configuration, incorrect system configuration, etc.; file.

Solution: Reinstall the system or repair the computer with Guard and Antivirus.