Do you want a network cable for a Xiaomi router, how to plug in a Xiaomi router

When you use the router for the first time, you need a network cable, and you can use the wifi connection after setting it up, and you no longer need a network cable.

The steps to set up your router are as follows:

1) First prepare the wireless router, turn on the power supply, then plug in the network cable, plug the incoming cable into the WAN port (usually the blue port), and connect the other end to the computer.

2) Enter and press enter in the browser, and then enter the corresponding account and password, generally the new ones are admin.

3) Enter the setting wizard on the left side of the operation interface, click Next, enter the Internet mode setting, you can see that there are three Internet access options, if it is dial-up, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

3) Select the corresponding method, fill in the Internet account and password, and then enter the wireless settings after the next step, and the wireless security option should be WPA-PSK WPA2-PSK, which is more secure, so as not to let people hack and rub the network.

4) Then press "Next", the route will be set up successfully, click Finish, and the router will automatically restart and it can be used.

A network cable is required.

The network cable interface of your mode or fiber optic modem should be connected to the WAN port of the Xiaomi router.

Now mobile phones and laptops have wifi, so you can connect directly to wifi. Thank you.

The one you want is plugged into the computer, and if the computer has a wireless network card, you don't need it.

All routers are wired in the same way.

The socket near the power supply is connected to the LAN 1 port of the fiber modem, and you can enter the router settings.

No matter what the route, the wiring is the same, the WAN port is the network access line, and the other LAN ports are connected to the Internet equipment.

To connect to the Internet with a Mi router, you need to set the Internet access method in the Router Setup Wizard.

The steps are as follows:

1. Plug the computer connection cable into the WLAN port of the router.

2. Open your computer browser and enter the router address in the address bar of your computer browser.

3. In the pop-up router management page, set the Internet mode.

4. Set the password and name of the wifi.

Mi router mini pull a network cable to the computer, set the computer Internet access method:

The computer automatically obtains the IP to access the Internet.

Set the method of automatic acquisition of computer IP and DNS]:

XP System Setup Method:

Right-click [Click on the neighbor] [Properties] [Right-click the local connection properties] [Double-click the TPC IP protocol] and then click [Automatically get IP address].

Win7 system setting method:

Right-click [Network] Properties [Change Adapter Settings] [Local Connection] [Right-click Local Connection Properties] [Double-click TPC IP Protocol] [Then click "Automatically Get IP Address"], and then click "Automatically Get DNS" Server Address] [Click OK].

1. Hardware connection: Hurry up and provide the entrance line to access the LAN port of the router, this port is different from the others, you can see that you can see that you can easily draw a network cable from other WAN ports to access the network card end of the computer.

2. Enter the router configuration: check the instructions behind your router, there should be an IP address at the beginning, enter this address in your browser, and then a dialog box will appear, allowing you to enter the username and password, this should also be found behind your router, the general username is admin password It may also be admin or empty, look at the instructions behind the router for details.

3. After entering, there should be a wizard to guide you to configure the router, that is, enter the account name and password given to you by the fast belt ** business, and it's done.

4. Also look for a wifi setting, configure your wireless network, and set a username and password.

Succeed with flying colors!

Plug the network cable into the LAN port of the router and connect it to the computer.

The Mi Road Hidden Key is not detected by the device to enter the home network cable, which may be caused by the wrong connection of the network cable on the Xiaomi router, reconnect the network cable or change a new network cable, or contact the manufacturer for after-sales processing.

There are two types of network cable interfaces on routers: WAN ports and LAN ports. The WAN port is used to connect to the optical modem or the home broadband network cable, and computers, nuclear return printers, TVs and other devices can be connected to the LAN port of the router.

Cause of failure:

1.If your Mi router prompts that it has detected that the WAN port network cable is not connected, it may be caused by an incorrect network cable connection on your Mi router.

2.Please make sure that the network cable connected from the optical modem, or the broadband network cable that enters the home, must be connected to the WAN port of the Xiaomi router (some Xiaomi routers are marked with the Internet port). If your home is fiber broadband, make sure that the other end of the network cable is connected to the LAN port of the modem.

3.If the modem or home broadband network cable has been connected to the WAN port Internet port of the Xiaomi router, but the Xiaomi router still prompts that the WAN port network cable access cannot be detected. It may be that there is a problem with your network cable, it is recommended to change the network cable and try again.

4.If you still can't detect the WAN port network cable access after replacing the network cable, it is recommended to restore your Xiaomi router to factory settings, and then reset it to surf the Internet, reset the wifi name and password.

Summary. 1.Broadband failure If your home has a problem with broadband or is in arrears, then your Xiaomi router will definitely not be able to access the Internet.

Therefore, it is recommended to check whether your broadband is in arrears and whether there is a fault. 2.Wrong settings on the router If the network cable connection on your Xiaomi router is wrong, or there is a problem with the Internet parameter setting, then you can't access the Internet, and the method of troubleshooting is as follows:

1) Check whether the network cable connection in your Mi router is correct, and the connection between it and the optical modem (home broadband network cable) and computer is as follows: The network cable connected from the optical modem or the home broadband network cable should be connected to the WAN (Internet) port of the Xiaomi router; Your home computer should be connected to any LAN port in the Mi router with a network cable.

Xiaomi routers can use wired networks + wireless networks.

Can you tell us more about that?

1.Broadband failure If your home has a problem with broadband or is in arrears, then your Xiaomi router will definitely not be able to access the Tong imitation network. Therefore, it is recommended to check whether your broadband is in arrears and whether there is a fault.

2.If the network cable on your Xiaomi router is connected incorrectly, or there is a problem with the Internet parameter setting, then you can't access the Internet, and the troubleshooting method is as follows: (1) First check whether the network cable connection in your Xiaomi router is correct, and the connection between it and the optical modem (home broadband network cable) and the computer is as follows:

The network cable connected from the optical modem or the broadband network cable of the fiber household in the state should be connected to the WAN (Internet) port of the Xiaomi router; Your home computer should be connected to any LAN port in the Mi router with a network cable.

Cat professional term is modem, is a kind of computer hardware, it can translate the computer's digital signals into analog signals that can be transmitted along the ordinary ** line, and these analog signals can be received by another modem at the other end of the line, and translated into a language that the computer can understand. This simple process completes the communication between the two computers.

Optical modem, also known as single-port optical transceiver, is a three-piece optical fiber transmission equipment developed for special user environments. The device adopts a large-scale integrated chip, simple circuit, low power consumption, high reliability, complete alarm status indication and perfect network management function.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。Nowadays, wireless routers are popular, with wireless wifi and wired interface functions.

Whether the Xiaomi router still needs to connect to the broadband modem has nothing to do with the router itself, and is determined by the type of broadband Internet access in the home. The original ** line access dial-up Internet access is almost eliminated, and there are currently two types of broadband: fiber to the home and ADSL to the home.

In the first case, after the fiber enters the home, you generally need to connect the fiber optic cat in front of the route, and you generally need to buy it yourself or the operator sends you to place it at home

First turn on the power of the Mi router, connect the broadband line to the blue "Internet interface" or "WLAN" interface of the Mi router, and then use the network cable to connect the black LAN port of the Mi router to the computer network card.

Then open the browser and type".

or "Open the Mi router management interface, and then enter the "Manage Password" to log in.

Of course, if there is a wireless network card installed on the computer, we can also connect the Xiaomi router wirelessly by connecting a hotspot containing "xiaomi".

After the login operation is completed, switch to the "Route Settings" tab, click the "Extranet Settings" item to enter, and then enter the account information provided by the network operator to complete the network access settings.

Then we can set up the Xiaomi router as we like. For example, switch to the "Routing Settings" - >Shutdown & Restart" item to perform shutdown or restart operations on the Xiaomi router.

End set up the Mi router on the mobile phone.

In the pop-up Internet Settings page, enter the account provided by the network operator to complete the network access settings.

Next, restart the name and password of the wifi.

After the network access settings are complete, click the "Settings" button in the upper right corner.

In the "Settings" interface that opens, you can set up the Xiaomi router.

1 Disassemble the Mi Router and use the Network Cable to link the Router and the Modem, which is a bridge for network transmission to the router.

3 First of all, we need to name the router wifi and set a password, which is the most basic step, and it is also to prevent others from surfing the network and other behaviors.

4 Next, we set up an anti-rub network for wifi, click on the anti-rub net in the app to turn it on, this setting must be turned on, which can effectively prevent others from entering the password and continuing to try the password link.

5 There is also an important setting that we can do by entering and clicking on a certain phone, only speed limiting, and disabling Internet access.

6 If you have children at home, you can use smart speed limiting, and you can set how much time you want to use the Internet for your child, which is a very friendly feature.

7 After the above operations, your router has been set up and is very safe, and there are some functions below that are also very practical, you can try them one by one.

3.Give the router wifi a name and set a password.

The Xiaomi router mini can surf the Internet without plugging in a network cable.

Mi router to set up Internet access steps:

1. Open the address bar of your computer browser, then enter or, enter the Mi router mini settings interface, and then click [Start].

2. Next, you need to enter the Internet broadband and password, this password is the broadband password provided by the network operator, generally when pulling the network cable, the network operator will tell you, if you have forgotten, you can contact the operator to obtain;

3. After completing the Internet settings, the next step is to create a wifi wireless network hotspot, here we need to create a wifi wireless password and management password, here is the registration to create, you need to enter a password that is easy to remember.

4. Through the above settings, the Xiaomi router mini is basically set up, and we can also use the mobile phone *** to scan and install the mobile phone client. At this point we can start surfing the web and our smartphone will be able to connect to the wifi network that we have just created, just by entering the password we have just created.

Hello. The Mi Router Mini has two ways to connect to the Internet.

1. Networking through the network cable and plugging in the network cable for use.

2. It is used as a repeater to enhance the existing WiFi signal.

You can log in to the official website of the Xiaomi router.

Definitely, you need to plug in the Internet cable and log in to the router with your width and password before you can access the Internet.