How to set more screens on one screen

First of allHDMIThe connection number TV,Desktop right-click property settings2The screen is used as an extended display,And adjust the appropriate resolution of the TV,At this time, the TV will have a computer desktop,But there is no icon,Open a program on the notebook can be dragged to the right side of the notebook desktop until it is invisible,At this time, this program will run to the TV desktop,This ang achieves the purpose of separating the two desktops,But the sound is still together,At this time, you need two sound cards,Maybe your notebook graphics card has a built-in sound card, After there are two sound cards, please give two desktop application programs, such as two ** device bar (how to set up other programs to study by yourself) each ** device to assign a sound card, so that you can watch different pictures and listen to different sounds at the same time, it is not difficult to set up, and you will be familiar with it a few more times, but the most important thing is the mouse control, the control on both sides will "fight", everyone rushes to control, so the actual use depends on the situation, it may or may not be convenient.

Do you mean desktop backgrounds?

Use Photoshop or CorelDraw to combine a few ** into a picture and put it on the desktop.

Hi if necessary

Here's how to make a computer screen full-screen:

First, right-click on the desktop and select "Screen Resolution".

2.A dialog box to Change monitor resolution pops up.

3.Click on the triangle to the right of "Resolution".

4.Select the highest resolution value.

5.Once you're set up, tap "Apply" in the bottom right corner.

6.When the "Retaine" dialog box pops up, select "Keep Changes".

7.Now the desktop has been set to full screen.

Routine maintenance. Displays operate in an environment for a long time and are affected by a variety of environmental factors, including humidity, temperature, cleanliness, electromagnetic interference, and power supply. Therefore, in order to make the performance of the display stable, it is necessary to understand and master the general maintenance knowledge and maintenance methods of the display.

1. Humidity factor.

The humidity is generally kept between 30% and 80%, but if the indoor humidity is higher than 80%, it will lead to condensation inside the display, and its high-voltage parts are very easy to produce discharge, which will damage the picture tube in serious cases, and the components in the machine are easy to rust and corrode, and in serious cases, the circuit board will be short-circuited.

When the indoor humidity is lower than 30%, it will cause static interference inside the display, and the possibility of components being damaged by static electricity will be greatly increased, thus affecting the normal operation of the display. Therefore, the display must pay attention to moisture-proof, if the display is not used for a long time, it is best to work regularly with electricity for a period of time, and use the heat generated when the display is working to evaporate the moisture in the machine.

2. Temperature factor.

The components inside the display, such as integrated circuits, transistors, power transformers, high-power resistors, etc., have to generate a lot of heat when working, and their working performance and service life will be greatly reduced at too high ambient temperatures, making the display work unstable, and the components will also accelerate aging. Therefore, there should be enough space around the display of the demonstrator, preferably in a ventilated place, so that heat can be dissipated. In the summer, it's best to place the monitor in an air-conditioned room or use an electric fan to help dissipate the heat.

3. Dust factor.

The high voltage in the display is as high as 10kV 20kV, such a high voltage can easily attract dust particles in the air, and the dust adsorbed on the printed circuit board will affect the heat dissipation of electronic components, and leakage may also occur, burning out components. Therefore, the hail or working environment should be kept clean.

To set up a multi-screen display, you'll need the following equipment:

A computer that supports multiple displays.

One or more hall orange displays.

Once you have the required equipment ready, you can follow these steps to set up your multiscreen:

Connect your TV, projector, or other display to your computer. This usually requires the use of cables such as HDMI, DVI, or VGA to connect them, depending on the type of interface your computer and display.

Open Settings in your Windows operating system, and then click System.

In the System window, select Display Settings. Here, you'll see a display icon that represents the currently connected display.

Set the resolution and zoom level for each of your displays. You can choose the resolution and zoom level by clicking on the icon for each display.

Select the monitor you want to be your primary display. The primary display displays the taskbar, desktop background, and other system notifications.

Adjust the position and orientation of each display. If you choose monitors of different sizes or are mounted differently, you may need to adjust their position and orientation so that they display correctly.

Click the Natherm or "Apply" button to save your changes. If you want to use these settings as defaults, you can click Save Changes.

Once you have completed the above steps, your multi-screen display has been set up. Now you can drag apps onto different displays and enjoy a larger workspace or entertainment experience.

The first thing to do is to make sure that the graphics card supports dual output ports, and if you can, you only need to equip two monitors and cables.

1. First of all, connect the computer display interface and graphics card interface respectively.

2. Then connect the power supply and display interface of the two monitors respectively.

3. After the connection is completed, go to the desktop, right-click the mouse and select the display settings.

4. Pop up two displays on the pop-up interface, indicating that the connection is successful.

5. Go to the bottom multi-monitor setup and choose to expand these monitors.

6. Done. <>

Precautions: 1. When using the computer, it is necessary to back up the computer files regularly to prevent the loss of files.

2. In the process of using the computer, the computer should be cleaned regularly.

3. In the process of using the computer, the computer must be operated in a standardized manner.

4. In the case of not knowing the problem, you must contact professional personnel for handling it as soon as possible.

1. Right-click on the desktop and select the screen resolution.

3. Click Confirm to do so.

The same content is displayed, and only the content in one computer is seen, which is just convenient for multiple people to see! , you can buy an adapter for a monitor, the largest can be connected to 10 computers at the same time, and there are 10 graphics card plugs.

The motherboard must support it, just add a split-screen display card to the motherboard!

First of all, there must be a discrete graphics card, which can be set in the control panel of the graphics card.

Take Windows 10 operation as an example:

2. Click the "Control Panel" in the start of Qi Kong.

3. Click to open "Outer Ring High Punch and Personalization".

4. Click to open "Connect to external display".

5. Click on the multi-monitor selection below.

6. Change the extended display to "show the desktop only on 1".

7. Then press enter to confirm, and click "Keep Changes" in the pop-up window.

8. And then it's done.