Which is the most difficult cost engineer and how do you review

The case is the most difficult, read more books and brush up on questions.

In the cost engineer examination, the subject of "Construction Project Cost Case Analysis" is the most difficult.

The reasons are as follows: "Case Analysis of Construction Project Cost" has a wide range of subject examinations. According to the four subjects of the Registered Cost Engineer Examination issued by the National Personnel Examination Center in 2017:

1) Construction project cost management.

2) Valuation of construction projects.

3) Construction engineering technology and measurement.

4) Case analysis of construction project cost.

Among these four subjects, the syllabus of "Case Analysis of Construction Project Cost" contains some of the contents of the first three subjects, such as: "Case Analysis of Construction Project Cost" includes the investment estimation in "Construction Project Valuation"; "Case Analysis of Construction Project Cost" includes the uncertainty analysis in "Construction Project Cost Management"; "Case Analysis of Construction Project Cost" includes the calculation of engineering quantity in "Construction Engineering Technology and Measurement".

Prerequisites. Cost Engineer I.

Those who abide by the new Constitution, laws and regulations of the People's Republic of China, have good professional quality and moral character, and have one of the following conditions, can apply for a cost engineer professional qualification examination:

A) with a college degree (or higher vocational education) in engineering cost, engaged in engineering cost business for 5 years;

He has a college degree (or higher vocational education) in civil engineering, water conservancy, equipment manufacturing, transportation, electronic information, finance and commerce, and has been engaged in engineering cost business for 6 years.

B) has passed the engineering education professional evaluation (certification) of engineering management, engineering cost professional bachelor's degree or degree, engaged in engineering cost business work for 4 years;

Have a bachelor's degree or degree in engineering, management and economics, and have been engaged in engineering cost business for 5 years.

C) with a master's degree or a second bachelor's degree in engineering, management, economics, engaged in engineering cost business for 3 years.

4) Have a doctorate degree in engineering, management and economics, and have been engaged in engineering cost business for 1 year.

E) with other professional corresponding academic qualifications or degrees, engaged in engineering cost business work experience increased by 1 year.

Cost engineer exam which subject is the most difficult which subject is easier, for novices how to choose the subject, presumably is a matter of concern to everyone, for the degree of difficulty, there are many mouths of the mouth, from Youlu education Zhu sorted out some netizens' complaints, you can see the real thoughts of netizens. However, the results of the big data survey show that case analysis is recognized as the most difficult subject.

Let's take a look at what the people who have tested have to say:

1. Everyone's educational experience is different, and the strengths and weaknesses are not the same, you have to determine the weak subjects according to your own situation, and focus on hard work; The practical examination comprehensively tests the mastery of theory and practice, and the question types are large, so more practice should be given; The four exams are all closed-book, and all the important formulas should be memorized.

2. For the layman, only the management is relatively simple; For industry insiders, the case is relatively difficult.

3. For people who don't study hard, it's difficult to do anything, as long as you study hard, it's not difficult.

4. Now I just started to look at cost management and pricing, and I feel that it is difficult to price. Hold on, everyone.

5. It's hard to say, it varies from person to person, cases and measurements are more difficult, the amount of case calculations is large, and the measurement knowledge points are many and miscellaneous, in fact, the pricing is not easy, and it takes effort to remember and understand.

6. It's rare for people who can't.

7. In addition to the relatively easy management of the cost engineer examination, the other three subjects are not easy. Metrology knowledge is scattered and covers a wide range, which is difficult to memorize and understand. There are a large number of pricing questions, and the questions are easy to have traps when calculating.

The case has a large number of questions, including management and pricing.

8. Case analysis and measurement are more difficult, case analysis is a variety of calculations, the last question is a little related to the practice, the others are theoretical calculations, although measurement is a multiple-choice question, but the theoretical knowledge is more, easy to mix, it is not very easy, the most difficult is case analysis, followed by measurement.

1. Test subjects and question types.

The subjects of the cost engineer examination are divided into:

Construction project cost management (multiple choice questions: 60 questions, multiple choice questions: 20 questions 100 points).

Valuation of construction projects (single choice questions: 72 questions, multiple choice questions: 24 questions, 120 points).

Construction Engineering Technology and Metrology (Civil Engineering) (Multiple choice questions: 60 questions, Multiple choice questions: 20 questions, 100 points).

Construction Engineering Technology and Metrology (Installation) (Multiple Choice: 40 Questions, Multiple Choice Questions: 20 Questions, 20 Questions, 100 Points).

Case analysis of construction project cost (6 case questions, 140 points).

2. Analysis of the degree of difficulty of each subject.

Difficulty sorting: case "measurement" and "pricing" management.

From the relatively simple cost management is the basic system and content of some project cost management, it is very simple to pass, if you want to get a high score is very difficult;

Then there is the engineering valuation subject, this subject has a direct correlation with the calculation of the daily work of the cost engineer, it should be said that it is the core subject of the cost engineer examination, and after the 14-year revision, the new textbook will have some impact on the candidates, increase some difficulty, and then the measurement, most of the candidates say that the installation will be more difficult than the civil engineering, the civil engineering is reviewed according to the outline, overcome the difficulties, and it is still possible to pass. Installation is relatively difficult and requires an emphasis on review.

Finally, the most difficult is the case analysis, which integrates the knowledge points and key points of each subject, and requires most of the calculation questions, which is second only to the installation.

The case analysis of the cost is still relatively difficult, and the syllabus of the "Case Analysis of Construction Project Cost" contains some of the content of the first three subjects, such as: "Case Analysis of Construction Project Cost" contains the investment estimation in the "Construction Project Valuation"; "Case Analysis of Construction Project Cost" includes the uncertainty analysis in "Construction Project Cost Management"; "Case Analysis of Construction Project Cost" includes the calculation of engineering quantity in "Construction Engineering Technology and Measurement".

The most difficult part of the cost engineer exam is cost engineering case analysis.

1. This course examines the comprehensive ability of the first three courses, and it is also a test of the actual work ability.

2. If you have practical experience in cost engineering, it will be easier to review. Candidates should focus on this course in their preparation for the exam, as this course has the lowest pass rate among all courses.

It's harder. The cost engineer exam includes four aspects of the exam, including basic theory and regulations (referred to as regulations), pricing and control, technology and measurement and cases, the first three are not too difficult, as long as you have perseverance, it is still easy to learn well. The difficult thing is the case, and it is not easy to live without a certain amount of practical experience.

There are also cost engineers who take the two-year rolling exam, as long as they pass all four subjects in two consecutive exams, so it is not too difficult in this regard.

It is difficult for cost engineers to pass the exam, which of course varies from person to person. But for the vast majority of people: the pass rate is low.

In 2016, 220,000 cost engineers applied for the examination, and only more than 13,000 people passed, with a success rate;

In 2017, 250,000 cost engineers applied for the examination, and only more than 19,000 people passed, with a success rate;

In 2018, 280,000 cost engineers applied for the examination, and only more than 17,000 people passed, with a success rate;

It is not surprising that cost engineers still have a certain status in the field of construction, after all, the words of the cost engineer have a decisive impact on the project, which not only means the amount of salary, but also the responsibilities of the cost engineer.

So if you decide to invest in the cost, you must constantly improve your knowledge reserves: engineering, economics, management, law, finance, taxation, insurance. Improve your practical work ability and problem-solving ability.

The cost engineer is relatively difficult to test, compared with the same type of construction engineer, supervision engineer, bidding engineer is a more difficult one, can be seen from its required years. You can take other certificates first, such as the second-level constructor, which is also more useful, and then you will have some experience in the cost engineer.

Comprehensive Review Phase 1: Comprehensive Review.

The subject of "Valuation and Control" is complicated and has a lot of memorization things, so it is necessary to spend some time to watch more, practice more, think diligently, and draw inferences from one case to another in order to achieve good results.

The second stage: consolidation and improvement.

The second stage of review is mainly to consolidate and improve the knowledge points, and candidates should have an understanding of the content of the examination and the score of each chapter in the past three years, so as to grasp the key points and make the review more targeted.

Stage 3: Highlight the key points.

The third stage is the sprint stage, and the main point of review is that the important content must be highlighted, and you can't grab it with a beard and eyebrows. There are many and miscellaneous knowledge points in this subject, and there are not many rules to follow, and most of them need to be memorized by rote.

You can click on my avatar and follow the famous teacher to prepare for the exam efficiently! There are also free famous teacher auditions and materials waiting for you. The cost discount campaign is underway.

There is still a lot of content in the 2018 cost engineer exam, which requires you to have a strong memory, and Dali Education has summarized a set of methods for you, which can help you improve your memory in preparing for the exam.

1. In-depth understanding.

After systematically studying the textbooks, candidates have a detailed understanding of the knowledge points of each subject and each chapter, and what they need to do now is how to systematically process these important test points and make them their own things and successfully control the examination room. Take the exam syllabus as the table of contents, recall the knowledge points of each chapter, and the instructions that can be easily recalled are well mastered, and the more difficult places need to be focused on, you can make marks, and then find out the teaching materials for key learning and memory, insist on it every day, practice makes perfect, and keep it in mind.

2. Understand memory.

There are also some test points in the cost engineer exam that candidates need to memorize, such as engineering cost pricing and control, basic theory of engineering cost management and related regulations, first of all, it is necessary to make it clear that understanding is the basis of memory, and the knowledge will naturally be remembered after understanding, and the effect of remembering after understanding is the best, and it is not easy to forget, so in order to make the memory more durable, it is a good memory method to take some time to understand, candidates may wish to try.

3. Summarize memory.

Summarizing and memorizing the following important contents such as concepts, theorems, and formulas involved in the exam, you can take the method of summarizing and memorizing. At this time, it is best to summarize such content, summarize it together for comparison and generalization, and organize it into your notes.

4. Associative memory.

This method is mainly aimed at the time when the exam is approaching, the exam is approaching day by day, many candidates also feel the urgency of time, it is impossible to conduct a comprehensive review of the textbook, but the knowledge points can not be ignored, at this time, you can take associative memory to consolidate the knowledge points, candidates can follow the smooth association of each chapter, and can also diverge and extend a certain knowledge point. Before going to bed, when taking a walk and other leisure time, you can think about it, and if you can't think of it, you can find teaching materials in time to check and fill in the gaps.