What should you pay attention to in the estimator exam

1. Read the textbook repeatedly.

It is said that the cost engineer exam is difficult, in fact, because the book is relatively thick, most of the test points are focused on the textbook, and the textbook is worth reading at least 3 times. The first basic learning can be combined with handouts and **, after being familiar with the framework, then go to the textbook to draw out the key points, and the second time before doing the questions, sort out the key points of the textbook. The third time is to return to the textbook by making mistakes.

The book should be in the first round, the more you read, the thicker it becomes, and when you need to combine other subjects with understanding, you need to expand it; In the second round, the more you read, the thinner and thinner, the key points and test points form a clear framework, and the third round does not need to be written by doing questions, and repeated reading can you thoroughly understand the textbook. It should be noted that the old and new textbooks are replaced, and each change point must be clearly summarized.

2. Ensure implementation in accordance with the plan.

The examination cycle of cost engineers is relatively long, which is not only a test of knowledge, but also a test of time and planning. Choose a suitable combination for you, then make a detailed planning list, allocate the time you can use to study effectively, and then urge yourself to follow the plan. If the execution is poor, you can make a weekly score sheet, summarize your own performance every week, and constantly supervise and improve.

You can join a test preparation team to encourage each other, supervise each other, and do questions together to simulate the feeling of the exam room to see who has a high score.

Third, it is easy to understand in combination with reality.

Some knowledge points are very blunt, more difficult to bite, every day the brain is entangled with different knowledge, it is easy to make yourself confused, through a simple case to connect these knowledge points together, easy to remember, just like using a sentence to string together English words, you only need to remember this example, you can distinguish these definitions. Combined with reality, it can help you understand some empty concepts. If you work, you can also combine your own work and dissect these knowledge points from some examples of actual work, which is a good direction.

Fourth, use exercises to break through yourself.

The real question is the window for you to spy on the cost engineer exam, grasp the key points and test points in the exam by doing the questions, find the breakthrough of the problem, dig deep into the idea of the question, and master the law of the proposition, only in this way can you achieve the effect of doing the question, sort out some wrong questions, you can see where the weakness of your review is, and return to the specific chapter of the textbook to find the answer. It is also necessary to use the past questions of cost engineers to simulate the environment of the examination room, exercise their ability to think independently, control the time, and use the exercises to further improve themselves.

Fifth, persevere to the end no matter what.

When you make up your mind to do something, no matter what the result is, you must persevere to the end, so that you have no regrets, you are qualified to be willful, and you know whether you can do it or not. Preparing for the cost engineer is also, go to the examination room to see, all the people who have paid the money and missed the exam, if you identify this matter, why not insist on doing it to the end? In the preparation for the exam, you should develop a good habit, study time every day should be moderate, find your own appropriate work intensity, and improve efficiency; Put your study plan in a conspicuous position and constantly strengthen your habits; Make the most of your scattered time and don't try to break the habit.

Revision should be regular, planned, and do the questions by yourself. Be careful not to be easily affected by the surrounding environment and memorize books.

At this time, the cost engineer exam is getting closer and closer, many candidates have finished the basic learning, began the second and third round of review, and in the review, the plan is still very important, no planning, all learning is blind. Therefore, at the beginning of the review, it is necessary to establish their own learning goals, carefully analyze their shortcomings, and make up for them in the remaining time, so that the review can cover all the knowledge points of the cost engineer exam. Candidates who are preparing for the cost engineer exam will practice the questions, but the way of practicing the questions is very different, and there is a kind of don't follow suit, that is, just look at the questions and don't do the questions.

Although the current cost engineer exam materials will have an answer analysis, it is convenient to look at the questions and analyze the candidates' pictures. Note 1. It is susceptible to the surrounding environment. Note 2, rote memorization of books, some people are learning other people's knowledge, rather than dizzy and memorizing there, it is better to turn it into their own understanding.

The Cost Engineer exam is not just a test of your memorization, so candidates should learn to understand and learn more effective study methods. [Click to get the cost engineer training learning materials].

There is a correlation between the various subjects of cost engineers, which can be reviewed together.

Scheme 1: Civil Engineering and CasesWhether the quantity calculation in civil engineering or the quantity calculation in the case, are closely related, although civil engineering and case are relatively difficult subjects, but learning together can promote each other, and the time spent is less than the time of learning two subjects alone.

Of course, this combination is only suitable for candidates with strong perseverance, high perception and energy.

Option 2: Valuation and civil engineeringOption 3: Management and CasesThe connection between management and the case is the closest, and even the two most closely related subjects in all subjects, the case has both the calculation in management, such as the flow construction and engineering network plan, and the theoretical content in management, such as the time value of funds and the economic evaluation of the investment plan, which is a more comprehensive subject, but from the point of view of the difficulty of learning, it mainly lies in the calculation, so the learning of management is conducive to promoting the learning of the case, and it is more appropriate for experts to analyze that candidates apply for these two subjects in the same year.

Option 4: Pricing and managementThe common denominator between valuation and management is the content of bidding and change claims, but in valuation, the main focus is on the determination of the price, while the management focuses more on the relevant procedures. However, the two subjects have one thing in common, that is, they are relatively simple compared to the other two subjects.

Some people say that "if you can't pass these two subjects, it seems that you don't need to take the registered cost engineer test", which seems to be a bit extreme, but it is also quite reasonable, although the registered cost engineer is difficult in each subject, but the industry has always believed that pricing and management is one of the slightly simple.

It is generally recommended to study "Construction Project Cost Management" and "Construction Project Valuation" first, because these two subjects are the basis of case analysis, and they are also the focus and difficulty of the examination.

Then study "Construction Engineering Technology and Metrology", because this subject is memorized and needs to be consolidated repeatedly. Finally, I will study "Case Analysis of Construction Project Cost", because this subject is a comprehensive application of the first three subjects, and it is necessary to have certain analytical ability and problem-solving skills.

It is recommended that each subject should be combined with textbooks, courseware, real questions and mock questions to study, focusing on mastering the test points and formulas, understanding the principles and methods of the square or sail, and taking notes and summaries. It is necessary to do more questions, summarize more, review more, and improve accuracy and speed. You should arrange your time reasonably, make a plan, keep reviewing, and constantly check your progress and effect.

No matter what the situation, if the learning ability is relatively poor, the construction team advises everyone not to study on their own, after all, the difficulty of the cost engineer exam is not low. Not only does it take time and energy to fail the exam all the time, but it also costs a lot of money to invest in it, and if the exam timeline is too long, it will make you more and more anxious. If you want to register for classes at a low cost, it is recommended to be large.

Comprehensive Review Phase 1: Comprehensive Review.

The subject of "Valuation and Control" is complicated and has a lot of memorization things, so it is necessary to spend some time to watch more, practice more, think diligently, and draw inferences from one case to another in order to achieve good results.

The second stage: consolidation and improvement.

The second stage of review is mainly to consolidate and improve the knowledge points, and candidates should have an understanding of the content of the examination and the score of each chapter in the past three years, so as to grasp the key points and make the review more targeted.

Stage 3: Highlight the key points.

The third stage is the sprint stage, and the main point of review is that the important content must be highlighted, and you can't grab it with a beard and eyebrows. There are many and miscellaneous knowledge points in this subject, and there are not many rules to follow, and most of them need to be memorized by rote.

Suggestions for the study of each subject of the first-level cost engineer examination.

First, cost management

This is the first test subject, and the test is all objective questions, 100 points on a 100-point scale, and 60 points to pass.

In this course, candidates are required to learn about the cost examination system, but also to understand the relevant laws and regulations of our country, such as construction law, contract law, bidding law, etc., but also to know project management, engineering economy, and financing methods, that is, financing needs to master a lot, need to memorize more, pay attention to understanding and memorizing.

Second, the construction project valuation

This subject is more difficult than the cost management exam, the full score system of the exam is reduced from 120 points to 100 points, the time is reduced from 3 hours to hours, and the passing score line of the exam is reduced to 60 points, but the degree of change in the exam syllabus is not large.

Project valuation needs to grasp the composition of the entire project cost, which is the most basic content. Secondly, you should know that for project valuation, there are fixed pricing and list valuation, and the project cost is determined under these two modes. For the whole process of construction, from the investment decision-making stage to the final completion settlement, how to control the cost at each stage.

3. Professional subjects

The professional course of a cost engineer is relatively difficult, and there are four majors, which require candidates to choose according to their major or experience in school. Here's a reminder to everyone, you should be cautious when choosing a major to apply for with zero foundation. The book of civil engineering is because the amount of knowledge is too large, the examination is particularly difficult, and the examination is particularly detailed, if you do not understand the two majors of civil engineering and installation, it is better to choose the installation project.

Because the installation project is relatively few candidates, the question type is relatively fixed and relatively simple, which is also the experience of previous candidates.

However, when you choose a major, you still have to look at the textbooks, read the books, and choose one that you like more and can accept.

Fourth, case analysis

The last subject is particularly difficult, the first three subject exams are multiple-choice questions, as long as the candidate chooses ABCD, but the last subject is all subjective, 6 big questions, the full score is changed from 140 points to 120 points, and the exam requirements must be answered within 4 hours.

The problem that many candidates have is that "they can do the questions, but they just can't finish them", so they need to exercise their problem-solving speed when they usually study. Don't read every question over and over again, be sure to pick up a pen, pick up a calculator, do the calculations yourself, and practice your speed.

The cost of the engineer exam is more difficult, the preparation for the exam should be based on the exam syllabus, follow the exam syllabus review, twice the result with half the effort. Summarize the similar or related content in the exam syllabus together, the content of the same chapter, and the steps of review: first the textbook, then read the ** courseware and finally do the practice questions, so that it is equivalent to reading a knowledge point three times, which can effectively deepen the memory.

There are a few things you need to pay attention to when reviewing for the cost engineer exam:

1.If you have more funds, sign up for a better training course; If you don't have the money, it's best to listen to the recording of your next training course online (which I did). There is no other reason for this, find the point in the book.

Otherwise, so many books, if you memorize them all, the effect will definitely not be good, find the key points, the understanding that should be understood, and the memory that should be memorized.

2.Buy a set of genuine textbooks, this is also very important, there are a lot of pirated textbooks, the content is incomplete and there are some errors (I bought a very important 3 very important ones, every review is very unhappy), you can buy some related exercises, but it is not recommended to buy more, you don't have so much time, you can also not buy.

3.Find out the real questions from the years before your exam (not less than 5 years), a set of real questions every year, it is best to find all the past 5 years, and it is best to find them in the future. Pay special attention to the case, it is best to time the work, because this will train your speed of doing the problem.

Many people can't finish the case in the formal exam (I didn't finish it the first time, so I had to retake it again).

4.After completing the past questions, review the textbook again with a focus, skim at what you have already learned, and carefully review the important content that you have not mastered.

5.Review the real questions you did before the exam, and take a look at some of the content you are not sure about.

Do this well, and I guess you'll be able to get through it. Good luck.

You can click on my avatar to enter the forum, where professional teachers can answer questions and discuss with other students. There is also a sharing of experience in preparing for the exam.