My computer often has a blue screen, I took a picture, do you know what the situation is? 5

Computer blue screen**0x000000f4 may be caused by a hardware failure or software incompatibility of the computer, and there are several solutions:

1. The first method is: go to the BIOS interface, find the "Into Grated Peripherals" option, and then change the value of the "SATA Configuration" item to the IDE. (The different interface of the computer is different, this is the SATA configuration).

2. Second, enter the safe mode of the computer and start Windows. Press the F8 key when powered on and select "Safe Mode".

3. Disable redundant startup items in safe mode, then enter "msconfig" in the "Run" dialog box, switch to "startup" in the open window, and cancel other startup items.

4. Third, turn on the safe mode of the computer and delete or restore the installed system to before the update.

5. The fourth blue screen may be a system problem and reinstall the system.

6. Fifth, the blue screen may be a problem with the hard disk, and you can replace the hard disk of the computer.

According to what you said, it is estimated that there is something wrong with your hard drive, and it is recommended that you save important information in advance. Just in case.

0x000000f4 is the blue screen state caused by the system encountering an obstacle when reading the instruction and cannot be read, check whether the computer memory module is plugged in, if not, just plug it in again. Check whether the computer hard disk is damaged, and use software to detect whether there is a problem with the hard disk. If the above two cannot be solved, you can reinstall the system.

According to what you are displaying, it should be your memory access error, you can try to remove the memory module after the host is completely powered off, wipe the gold finger on the memory module with an eraser, and then reinstall it back; If the fault persists, you can check whether the driver has been updated recently or installed.

There are many reasons that can lead to a computer's blue screen, such as oxidation of the gold finger of the memory stick, and high CPU temperature. This should be caused by the damage of the hard disk, and it is not ruled out that the hard disk cable is aging. Buy a new cable and try it for a few days, if it doesn't work, you can only change the hard drive.

The current market price of a 1t mechanical hard disk is about 260 yuan.

If the heat is more serious, it may be caused by too high temperature, you open the case cover, look at the fan's luck, or directly remove it to clean up the dust, these are hardware problems, if you enter the safe mode, can it run normally, if it is normal, then reinstall the system or 360 system first aid kit to scan it.

It should be an error on the hard disk or memory! 0x0000007e should remember that it was a memory error!

**： 0x00000024

Cause: Too many shared files are open.

Unstable crash caused by the lack of system files, it is recommended to format the system disk and reinstall the system!

You should delete the most recently installed stuff. Or with 360's blue screen fix. There are many reasons for this blue screen.

Unless you know a lot about computers, it is recommended to format the C drive and reinstall it.

The system is messed up, from the system to the system.

Analysis: BSOD is usually caused by software or hardware failures, and the causes are many and complex, and its error** is generally not clearly diagnostic.

Suggestion: Reinstalling the system is the easiest and quickest way to do it, and if the system is successfully reinstalled, you can also rule out hardware problems.

1.Restart the computer, if you can enter the system normally, it means that the last blue screen was just an occasional program or system running error, and it doesn't matter.

2.If you have frequent blue screens or can't enter the system normally, press F8 immediately after booting to see if you can enter the safe mode or configure the correct mode for the last time, if so, enter and exit, and then restart to enter the normal mode.

3.If not, press F11 after rebooting to see if there is a one-click backup, and if so, one-click restore.

4.If there is no one-click restore, use the system USB flash drive to reinstall the system. After booting up, press the del key (notebooks are generally F2 or according to the bottom line of the screen prompt characters) to enter CMOS, and set the U disk as the first boot item.

Reboot into the boot menu of the USB flash drive, select Clone Installation, and then follow the prompts.

Try to reinstall the system, my laptop is also like this, after reinstalling the system, it will be fine.

There are three possibilities for this blue screen:

1. Memory. Remove the memory and wipe the gold finger of the memory with an eraser, then install it back, turn on the power and turn on the computer. If you have two or more memories, consider compatibility issues (even if they are the same brand, there may be compatibility issues.) You can try to run the next one and then turn it on for a period of time to see if it is normal.

2. A certain driver.

Caused by updating or installing a new version of the driver. Restart the computer and press F8 to enter safe mode, uninstall the newly installed driver, and then restart the computer and reinstall the older driver;

3. Hard disk. Format the C drive to reinstall the system, or make a new partition of the hard disk and then reinstall the system, or remove the hard disk and hang it to another computer, and make a low grid for the hard disk.

Also: The English at the bottom of the screen is to the effect: disk crash, please dump data.

Crash Just restart your computer and reinstall your system.

Look at the rhubarb, is it honest?

Does your computer have a blue screen when it enters the system, or does it start with a blue screen?

You try to plug the memory module back in, and wipe off the gold finger with a dry towel when you unplug it.

You can see if there are some key prompts on the computer, such as: f1, enter, if there is any, try to press it, if there is no or useless, you can only fix it.