Volkswagen Tiguan 20151 8t manual limited plate burner oil what s going on

Why does Tiguan burn engine oil?

In order to protect the engine and prolong the engine life, Volkswagen is designed to reduce the frictional resistance between the piston ring and the cylinder wall, and an oil film will be formed on the cylinder wall, and part of the oil film will be burned off with the gas burned at high temperature, so the oil loss is more than the same period last year.

1. Volkswagen's processing technology for engine cylinders, the engine cylinder wall is shown as a mesh shape under the microscope, each small mesh is a "small oil depot" for storing oil, and the piston has better lubrication performance than the flat cylinder wall when running up and down in the cylinder, which also minimizes the wear between the piston ring and the cylinder wall.

2. The toughness of the piston ring of the Volkswagen car is better, and the degree of tension is weaker than that of the Japanese car, simply put, it is strong, but the elasticity is small, and this matching naturally reduces the wear caused by the piston ring running up and down on the cylinder wall, so the Volkswagen car after driving hundreds of thousands of kilometers to measure the wear of the cylinder wall of the engine, which is much smaller than that of other car series, and the engine can still maintain good working condition.

3. The engine is like the heart of the car, the engine burns oil in the final analysis, or the piston ring has a problem, under normal circumstances, there will be oil loss every 1000km, if it exceeds too much, it is possible to burn oil. If there is a problem with the sealing of the piston ring, the oil will follow the movement of the piston and secretly drill into the combustion chamber to participate in the combustion, and then the oil will be burned.

4. In order to prolong the service life of the engine, Volkswagen manufacturers cause engine oil to be burned.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Fuel in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston cylinder wall clearance, etc., all of which are directly or indirectly related to the formation of carbon deposits, so keeping the fuel circuit clean is of great help to prevent burning engine oil, of course, this needs to be done with the help of high-quality PNF fuel additives.

The cause of engine oil burning is nothing more than excessive carbon deposition in the engine, oil leakage and cylinder wall wear. A slight burn of oil is completely repairable.

You are a new car, it is estimated that the oil is not burning very badly, if you are worried about the aggravation of the problem, you can prevent or solve it in advance.

Reasons for burning engine oil:

Domestic oil products and road conditions are prone to carbon deposits;

Carbon deposition causes the piston ring to jam and lose its oil scraping performance; The oil return hole is blocked, and the oil cannot return to the crankcase normally;

Wear between the cylinder wall and the piston ring, the gap is too large;

Oil leakage caused by corrosion and aging of valve oil seals and crankshaft oil seals;

Now found early prevention can avoid deterioration again, there is no need to spend a lot of money, you can use German Marty products, no need to dismantle and repair to solve this problem, in Germany's 65 years of history, the reputation has been very good, 13 years into China, some products can improve the oil, solve the problem of too much carbon deposition in the oil system, reduce the rough and sharp friction in the engine, but also can prevent the oxidation of the engine oil and delay the aging process caused by it, fundamentally solve the problem of burning oil.