What is the right timing chain for the Volkswagen Touran, does the Volkswagen Tiguan need to replace

The timing chain also needs to be replaced, but it does not need to be replaced regularly, the general car has been driving for seven or eight years or about 100,000 kilometers to check the chain, and the replacement cycle is about 15-200,000 kilometers, depending on the actual use of the car.

Volkswagen Tiguan Timing Chain Replacement Cycle:

1. There is no clear indication of how long the Tiguan timing chain should be replaced, generally 15-200,000 kilometers for an inspection, and the specific replacement will be carried out in actual use, if the wear is serious or there is other damage, it should be replaced in time;

2. You can also check the specific provisions of the car's instruction manual (or maintenance manual), and replace it according to the maintenance tips;

3. The main function of the engine timing chain is to drive the valve mechanism of the engine, so that the engine intake and exhaust valves can be opened or closed at the appropriate time, so as to ensure that the engine cylinder can be inhaled and exhausted normally.

Hello, the timing chain of this car does not need to be replaced, as long as there is no fault it can be used all the time, and if there is a failure, it can be replaced later.

Before July 12, the car needs to change the timing chain, its chain tensioner parts tail number is H, there is no design, anti-regression ratchet is easy to loosen the chain, resulting in jumping teeth, after the improvement, the tensioner chain life of the part tail number K is significantly improved, but the manufacturer has never said maintenance-free and so on, and when there is a failure, the timing of the jumping tooth tops the valve and needs to disassemble the engine, and the trouble is big!

Eight to 100,000 kilometers need to regularly check the chain, if the inspection is found to be elongated more than 2 degrees need to be replaced, once elongated, the chain skips teeth, and the maintenance cost is several times greater!

If it does not need to be replaced, regular maintenance is on the line, as long as there is no fault, it can be used all the time, and if there is a failure, it can be replaced later.

Hello! Under normal use, the chain does not need to be replaced.

It does not need to be replaced under normal maintenance, and it is maintenance-free for life.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions!

No replacement is required.

As long as the timing data is not greater than 3 degrees, it does not need to be replaced.

If there is a problem with the timing chain, it will sound when it starts. And when you speed up, the acceleration will not be smooth. A fault light will also be lit on the meter.

If the chain is elongated or the tensioner is damaged. Computer debriefing confirms the failure**. And it can't be removed. If the fault cannot be removed, it must be repaired, otherwise it will lead to the top valve in serious cases.

Does the Volkswagen 15 Tiguan Timing Chain 2 need to be replaced?

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! No replacement is required. As long as the timing data is not greater than 3 degrees, it does not need to be replaced.

If there is a problem with the timing chain, it will sound when it starts. And when you speed up, the acceleration will not be smooth. A fault light will also be lit on the meter.

If the chain is elongated or the tensioner is damaged. Computer debriefing confirms the failure**. And it can't be removed.

For example, the engine is less effective than before, and the starting power is weak, so you have to step on the accelerator to increase the speed to speed up. The engine is yellow, and the fault code indicates that the phase sensor signal is unreasonable, is this generally a sensor problem or a timing chain problem?

It is usually a sensor problem, such as a damaged crankshaft sensor.

Summary. The timing chain of the engine of this car, this 2 mm. This two millimeters of this effect is very small, if the engine does not appear obvious shake or acceleration weakness, it can be replaced without much impact.

Does the Volkswagen 15 Tiguan Timing Chain 2 need to be replaced?

Hello, happy to answer your questions.

The timing chain of the engine of this car, this 2 mm. This two millimeters of this effect is very small, if the engine does not appear obvious shake or acceleration weakness, it can be replaced without much impact.

Now the number of kilometers is 120,000.

This is the data that the computer reads at the time of maintenance.

Is there any shaking of the engine or weak acceleration or failure of the lamp?

It is all normal use, that is, when it is maintained, it is said that the timing chain needs to be replaced.

Under normal circumstances, there is no need to replace the official chain, which is maintenance-free. Normal use is fine, no problem.

Maintenance is normal maintenance, that is, the car burns a little oil, about 1500 kilometers, you have to burn 1L of oil, how to deal with this situation, in this case the engine burns oil. The best way to do this is to take the engine apart and repair it. It is to replace this piston ring, including this valve seal, which can be completely solved.

The cost is too high<> is the use of the ** liquid of the car servant, does it have a certain effect?

This one doesn't have much effect, this one burns engine oil. There is no way to solve it completely. In this case, you can also do not need to repair, that is, it is normal for the engine to burn oil, and it will appear after the number of kilometers.

In the case of lack of engine oil, it is enough to add engine oil frequently, and it can also be used, and the impact is not great.

The timing chain that should be used, you can open the engine compartment to see the material of the timing housing.

If the timing shell is made of plastic, then the engine of this car uses the timing belt, because the timing belt will age, so it needs to be replaced regularly, and the material of the bridge is generally made of plastic, which is easy to disassemble and assemble, and the timing leather mess stove belt does not need lubrication, so the sealing requirements are very low.

If the timing cover is made of metal, then this engine uses the timing chain, because the timing chain needs oil lubrication to work, and the timing chain does not need to be replaced regularly, so the metal material is used for sealing and durability.

1. Make sure that the No. 1 piston is located at the top dead center of the compression stroke. Make sure that the camshaft timing mark is aligned with the mark on the timing belt cover, and the crankshaft sprocket timing mark is aligned with the mark on the oil pump housing;

2. Put the timing belt to install the crankshaft sprocket, and then pass through the left camshaft sprocket to the right side camshaft sprocket. Make sure that the old belt is installed in the original direction of rotation and that the letters on the new belt can be read from behind the engine;

3. Loosen the timing belt tensioner nut. Lift and support the car. Install the intermediate timing belt cover to ensure that the crankshaft sensor harness is properly routed. Install the lower timing belt cover. installation of crankshaft shock absorbers;

4. Turn the crankshaft clockwise for about 2 turns until the yellow mark on the crankshaft shock absorber aligns with the "0" mark on the lower timing belt cover. Remove the plastic access door on the lower timing belt cover. Tighten the timing belt tensioner nut to the canonical value. installation of plastic access doors;

5. Turn the crankshaft 60 degrees clockwise until the white mark on the crankshaft shock absorber aligns with the "0" mark on the lower timing belt cover. Make sure that the camshaft timing marks are aligned with the marks on the timing cover. Install the remaining parts in the reverse order of the disassembly process.

Subsidies for car purchases.

15 models of Volkswagen Touran engine is a timing belt, Volkswagen from the EA888 three generations suddenly changed the timing link of the engine to the timing belt, many people do not understand, in fact, this is a correct choice, these years Volkswagen's timing chain problems caused by the top cylinder engine is not a few, is equipped with the timing chain of the engine, many owners have also replaced the chain, basically the same as the belt, not maintenance-free, because the tensioner can not insist, if you change the tensioner, After opening, many car owners also changed the chain, otherwise it was opened in vain, and I think this change is actually a good thing. The main function of the 15 Volkswagen Touran is to drive the valve mechanism of the engine, so that the intake and exhaust valves of the engine can be opened or closed at the appropriate time, so as to ensure that the engine cylinder can be suction and exhaust normally. In some models, such as Volkswagen Jetta (EFI), Santana 2000, Bora, Audi, etc., the timing belt also shoulders the task of driving the water pump.

The timing belt replacement cycle is generally in the vehicle to 60,000 kilometers should be replaced when the sakura should be replaced, the specific replacement cycle depends on the use of the belt wear degree. Generally speaking, the manufacturer's maintenance manual only gives the approximate maintenance cycle, the quality of the belt under actual conditions is superior, and the aging situation is different in different use environments, so we should still vary from car to car, and find problems to solve in time. It is necessary to regularly check the use of the timing belt, if you see cracks on the surface of the timing belt, and the rubber smell of the belt body is very strong, you need to pay attention to whether the timing belt is aging; If there is an abnormal sound when driving, it is necessary to pay attention to whether the timing belt is installed correctly or whether the quality and tooth shape of the timing belt are qualified and match the generator timing pulley.

If there is an abnormality, you should consider replacing the timing belt. For all engines, timing belts must never skip or break. If the gear jumping phenomenon occurs, the engine will not work normally, and there will be unstable idling, poor acceleration or inability to hit the car; If the timing belt breaks, the engine will stop immediately, and the multi-valve engine will also cause the piston to bend the top valve, which will seriously lead to the direct scrapping of the engine.