-
Anonymous users2024-02-09You must know that even if the CPU exceeds 100%, the performance increase will not reach 100%, because there are also limitations such as memory speed, hard disk speed, etc., which restrict the overall performance. The U of the Q8 series is 333 external frequency, and the motherboard of P43 can reach up to 400 external frequency (this can be adjusted in the BIOS, specific to the MSI official website ** English version or Chinese traditional Chinese version of the manual, learn the conditions of BIOS). Unless it's a PX5 board.
I didn't want to teach you, because obviously you don't understand it at all, but you can read the manual carefully and try to set the CPU frequency to 400, so that it can reach 400*7=. First of all, as a novice, you should not try to adjust the voltage, how much is more than if you don't adjust the voltage. If your U constitution is good, I hope it can stabilize at 400 external frequency (unlikely).
Even if it is reached, you will not feel the 20% increase in CPU frequency in normal use. In addition to compressing the package and decompressing it.
The Q8 series and Q9 series, I personally think that they are chicken ribs, the frequency is not high, and the actual use of the 4 core bars does not make much sense.
If you don't care about how much performance you get, but instead learn how to overclock on your existing equipment, then I recommend selling your Q8200 and buying an E5 or E7 to learn it. At the very least, you'll be able to experience the effects of overclocking with minimal effort. (**There are many CPU sellers who support trade-in, and above the crown, they are still really doing business).
On the E5 series, the U is 200 external frequency, as long as the U physique is good enough, theoretically the super 400 external frequency is increased by 100%, and the E7 series is 266 external frequency, as long as the CPU can eat, the super 400 external frequency is also a 50% increase. Of course, this is theoretical. In fact, the old Celeron 4x0, E3 and E5 series are relatively cheap and effective options.
Moreover, it doesn't make much sense to learn the overclocking of the 775 platform, and the u of the i-series is overclocked in a different way (the i-series is super-doubled).
If you have any questions, please continue to ask. And it's good to be bold in overclocking, it's a big deal that you can't start the machine, so clear the CMOS and come again. After surpassing it, you can enter the win and there is an inexplicable problem, which means that it is not very stable, so adjust the frequency down a little.
-
Anonymous users2024-02-08Answer: However, what is not seen is the same as not existing? Remember, is not never gone.
-
Anonymous users2024-02-07Overclocking is not recommended for newbies as it can have serious consequences.
-
Anonymous users2024-02-06Processor overclocking can improve the performance of the console to a certain extent, but overclocking is risky, and overclocking needs to be done with caution.
As we all know, the main frequency of the processor = the external frequency * the multiplier, if we want to increase the main frequency, we need to increase the external frequency or multiplier, or increase the external frequency and the doubling at the same time.
First, restart your computer and go to the LNTILLIGNT Tweake menu in the BIOS and find the Advanced Frequency Settings option, which is used to adjust the overclocking frequencies.
Second, enter this menu bar to find the processor base clock (gear ratio) external frequency option, here you can adjust the external frequency, a total of, and four levels, it is recommended that the external frequency is more stable from a small setting, and it is recommended that the external frequency is set to, that is, adjusted to 125MHz (if the menu cannot adjust the multiple, it is recommended to change the CPU base clock to manual).
Thirdly, you can overmultiply the frequency next, it is recommended to turn off the Intel Turbo Boost Technology before over-multipliing, the CPU clock ratio is a frequency doubling option, where you can adjust the frequency multiplier, it is recommended to start with the minimum number.
Fourth, in terms of voltage, it is recommended to start with the default first, if there is a phenomenon that cannot be started after overclocking, then it is necessary to add voltage. Go to the CPU Valtage Control option and increase the CPU vcore voltage and CPU ring voltage slightly. Save the reboot and overclock successfully.
After successful overclocking, you can use CPU-Z to view the data of the processor after overclocking.
-
Anonymous users2024-02-05GPU performance can't be evaluated just by running scores. You can run a demo or game to see if the frame rate increases.
If not, it means that the GPU voltage is insufficient after overclocking, or the temperature is too high, and you can also try to change the overclocking software.
I'll put an end to your question.
After reading everyone's right, I basically don't encourage you to overclock, because it's easy to have problems if you don't play this job for a long time, although there are a lot of protection measures now, so I'll talk about the less dangerous overclocking practices. >>>More
First of all, you have to be clear about your goals and understand what you want to learn. Whether it's to learn a musical instrument, or to play a vocal music, or to write songs. These three items include all the contents. >>>More
Thermal performance is a very important performance indicator for computer equipment. If the heat dissipation performance of the device is not good, it will affect the running speed of the device, resulting in poor operation of the device, crash, etc.; Worse cases can lead to equipment failure, hardware burnout, etc. >>>More
Brown is freckles?? Use some barrier cream, otherwise the color will get darker and darker after the sun Or you apply some BB cream to cover those spots Very thin It won't feel like it's powdered or anything It's not harmful to ** >>>More
I think it's best not to let your parents tell the teacher, unless they have a good relationship with each other, or the teacher thinks that such a trivial matter still asks the parents to "press" him (her), you just think you don't want to sit so close, the projector is very difficult, your eyes are often very tired, or the first row allows you to block the view of others, easy to cause a hunchback, etc., talk to the teacher again, if the effect is not obvious, then the attitude is resolute. That way, the teacher won't embarrass you.