-
Anonymous users2024-02-091. First of all, unplug the battery and use the adapter directly to see if the adapter is easy to use. 2. Use battery calibration to see if it solves your problem. 3. You can use a battery testing tool to test whether there is a problem with your battery.
4. If you don't understand anything about battery calibration and battery testing, you can open the HP official website, and then select [Engineer Online Support] - [Engineer**Technical Support] - [Laptop] Engineer** for consultation, the engineers here are so professional. 5. If there is a problem with the adapter or the battery, you can contact the HP repair center.
-
Anonymous users2024-02-08It cannot be charged, and the charger circuit of the motherboard is partially damaged, but it has not been short-circuited. It takes HP to fix it.
-
Anonymous users2024-02-07It should be that the battery is overshot, try it after discharging it first!
-
Anonymous users2024-02-06Turn it off, connect it to the power supply, and turn it on again after a while to see the power.
-
Anonymous users2024-02-051. Battery failure.
If the laptop battery cannot be charged, it may be that the battery has a hardware failure, which can be judged by restarting the computer or plugging and unplugging the battery. If it proves that the wear and tear is very high, it should be repaired or replaced by a professional repair center.
2. Software failure.
Nowadays, many well-known notebook brands have their own software such as battery manager, which will automatically turn on the "battery protection mode" to extend the life of the TV. If the laptop battery cannot be charged, it may be that the battery manager has turned off the way to obtain power, and you can check the option to prohibit charging in the relevant software.
3. The adapter is faulty.
The laptop battery does not charge may be a problem with the charger, poor contact or short circuit will cause this phenomenon, the solution is to buy the same model adapter for charging.
-
Anonymous users2024-02-04You can check the health status of the battery, if the battery is seriously depleted and cannot be charged, then the battery still needs to be replaced in time.
-
Anonymous users2024-02-03HP laptops are sometimes prone to problems, what should I do if the HP laptop battery can't be charged? The following is the relevant information that I have compiled for you about HP laptop battery not charging, I hope it will be helpful to you!
Ambient temperature affects battery usage.
0 degrees Celsius, the battery is not charged.
1 10 degrees Celsius, the battery charging progress is very slow, which is due to the natural conditions of battery cell technology.
At 45 degrees Celsius, the battery stops charging, and when the battery temperature drops below this temperature, the battery will resume charging.
Use battery detection software to determine the condition of the battery.
Operation method: 2, Double-click the "Help Assistant Software" shortcut icon on the desktop, if you can't find the icon, "Start" - "All Programs" - "Help and Support" - "Help Assistant", click to enter.
Open the main interface and select "Battery & Performance".
Click "Battery Check" to start the test.
Wait a moment. <>
Battery test results appear. Click "Advanced" to display the battery details.
"Advanced"in the details.
Battery calibration. Manually calibrating the battery requires four steps: fully charge, discharge, or run out of battery, recharge the battery, and run the battery test.
Calibrating the battery improves the accuracy of the battery meter software, so it can more accurately display how much the battery is charged.
If the detection is abnormal or the charging cannot be used, the following methods can be used.
1.Replace other batteries of the same model.
2.Discharge static electricity from the motherboard.
How to release static electricity:
Turn off the laptop, remove the battery and power supply and other external devices, press and hold the power button for 30 seconds or leave it for about 30 minutes, and then insert the battery and power supply to power on.
3. Restore the BIOS default.
-
Anonymous users2024-02-02If your laptop battery shows only 94% and is no longer charging, there are a few possible reasons:
1.Battery Protect Mode: Some laptops have a battery protection mode to prevent the battery from overcharging.
When the battery is close to 100%, it may stop charging to avoid damaging the electric stuffy dry potato pool. You can try unplugging the power adapter from the power adapter, wait a few minutes, and then plug it back in to see if the battery starts charging.
2.Battery aging: After a period of use, the battery may gradually age, causing it to not be able to be recharged again. If the battery has been used for a few years, then the battery may have reached the end of its life. At this point, you need to consider replacing the battery.
3.Charger issues: If the connectors of the battery and power adapter are damaged or loose, they may not be able to charge. Try checking the connectors of the power adapter and battery to make sure they are not damaged or detached.
4.Driver issues: Sometimes the battery not charging can be related to the battery driver. You can try updating your laptop's battery drivers to see if that fixes the issue.
If none of the above methods solve the problem, it is recommended to consult the after-sales service of the laptop or the help of professional technicians.
-
Anonymous users2024-02-01Hello dear, I am happy to answer for you, the reasons and solutions for HP laptop battery charging are as follows: (1) whether the battery is installed correctly, whether the battery is not installed in place, to see whether it is due to the installation of the battery caused by the line is not connected normally, resulting in the failure to charge. Method:
In this case, simply remove the battery and reinstall it. (2) In the case of ensuring that the battery is installed in place, the battery still cannot be charged, then it is necessary to check whether the circuit board of the charger is faulty or the battery is aging. In both cases, you can find a computer of the same model to check whether there is a problem
If so, simply replace the battery. (3) After excluding the above situation, the battery still cannot be charged, then you need to see if the notebook has started its own configured power management software for some reason and turned on the battery protection mode. Method:
In this case, you need to go to the computer's power management software and change the charging options accordingly.
-
Anonymous users2024-01-31Regarding the above problems, the first thing to check is whether the original charger is normal.
Check whether there are problems such as poor contact inside the original charging data cable.
Check the charging cable plug and the laptop charging input interface to see if there is any poor internal contact between the two.
Check if the battery inside the laptop is normal(For this inspection, it is best to ask a professional master to test the battery inside the notebook).
It should be that the memory module is not plugged in properly, you unplug it and try it. >>>More
1. Activate the new battery.
When a new laptop battery is first turned on, the battery itself should have more than 70 charges (this is also a common practice for manufacturers). If you open the laptop you bought for the first time and find that the battery is fully charged or more than 70% charged, it means that the manufacturer has done a factory test). At this time, you should fully charge the battery, the charging time must be more than 12 hours, and then set the battery to turn off when the battery is 5% power, and repeat it three times, so that the battery can be completely activated, which can effectively improve the service life of the battery. >>>More
I'm a Dell Native user. Now Dell battery quality is far less than it used to be. >>>More
This is the first thing to check whether the battery and the notebook are in good contact, if the contact is not good, although you can read the communication data of the battery, you can not charge the battery, at this time you can take out the battery and test the machine more, insert the battery into the computer If you hear a beep, you can think that the contact has been good, try a few more times, you can rule out the problem of poor contact between the computer and the battery, especially when using IBM computers, pay attention to this problem. If it is confirmed that the contact between the battery and the computer is good, but the battery still cannot work normally, then it is possible that the battery itself has a quality problem, and the possibility of the problem is twofold: first, the circuit board of the battery is damaged or has been short-circuited protection; Second, the battery produced by the company may not match the computer you use, incompatible, please correct the battery, or you can come like this, you put you and the battery to someone else's book to try it, to see if this is the case, there will be more relevant information about the use and maintenance of the battery Jimo, I hope mine can help you.
The graphics driver has been destroyed! Do you want to buy another ???