My computer is IBMR60 and I want to engrave a CD, but the function is incorrect, what should I do?

Kangbao can't burn ***+r disk, only cd-r, cd+r;

It should be possible, and the optical drive of the notebook is generally configured with a burning optical drive. As for the operation, the most common is to use nero to burn, this software is very easy to use, you go to the next Chinese version, look at the operation steps can be burned out.

Hello, due to the large number of T400 series models, some models are equipped with optical drives that can be burned, and some are not. You can provide the specific model of your model, or log on to the Lenovo official website to inquire.

Look at your specific configuration, look at it in my computer, that*** is to display CDR, RW.

Yes, it's OK to see if the rewritable is indicated on the CD-ROM drive!! It is best to burn with nore!!

You see whether yours is *** burning or ordinary *** optical drive, T400 has many models.

OK ·

If I make it, I go to the next software. Speaking of which, I can't understand it for a day

If you need to turn on the optical drive, there are two methods for reference:

1. Directly click the on/off button on the optical drive;

2. Click "Computer", right-click on the G drive, and click "Eject".

Are you saying you want to tear down the optical drive? I don't know what model of machine you are. The optical drive of the ThinkPad is basically fixed by a screw, the D side, you can take a look at it, and you can remove it.

You see if there is a CD-ROM drive in the Device Manager, if so, uninstall the CD-ROM drive and restart the computer. If not, it means that the machine does not recognize the hardware of the optical drive, enter the BIOS to reply, and take a look at the system.

The last one is the CD bar.

Generally, if the optical drive is dirty, it can be washed with alcohol cotton.

Burning files to disc requires: burn optical drive, burning software, blank disc.

Take the burning software Nero as an example:

1. Put the blank disc into the recorder;

2. Start the Nero burning software and enter the Nero Express burning interface

3. Select the file type that needs to be burned, find the location of the file to be burned in the notebook, and double-click to select it;

2) Select the recorder you want to use.

3) Write radio box to be checked, the default is checked.

4) The number of copies can be burned.

5) Check the "Check Disc Data after Burning" to verify whether the disc is burned successfully.

5. After setting, click the Burn button to burn and wait for the burn to finish.

You can burn a CD, you put a burning disc into it, click on it on the optical drive, and then you can write the disk.

Remember to install burning software such as Nero, and you can engrave.

It is a *** optical drive, readable *** disc, can burn CD discs, but cannot burn *** discs.

Go to the next nero.,Use the Windows that comes with the can't boot disc.,You can only simply engrave data.,Nero is powerful.,There's a wizard!

Yes, it's burned in MediaPalyer.

You've got to be a recorder.