How to add a new hard drive How to add a new hard drive and where to set it up?

Look at what interface your motherboard has, if the newer motherboard has SATA that is, serial port, it is estimated that yours is older, only parallel port, go to the computer city to buy a parallel port hard disk and the corresponding data cable, and set up the master and slave disk in the blos after connection!

I don't think there's a 120G desktop hard drive. Buy a 160G SATA hard disk, about 300, plug it directly into the motherboard (provided that your motherboard has a SATA interface), and you can use it (SATA hard disk does not need to adjust the master disk and slave disk, it will automatically adjust).

It's 200g to buy a disc and connect two wires, it's very simple.

What is the hard drive interface of your motherboard?

In Computer Management, find Disk Management. Right-click and select Create VHD Virtual Hard Disk. Set the storage path and capacity of your virtual hard disk, and click OK.

In this case, Disk Management will have an additional hard disk, right-click and select Initialize Hard Disk. Right-click the disk and select Create Volume, detailed steps:

1. Move the mouse to My Computer, right-click and select Manage.

2. In Computer Management God and Hori, find Disk Management.

3. Disk Management, right-click to create VHD virtual hard disk.

4. Set the storage path and capacity of your virtual hard disk.

5. At this time, there will be an extra hard disk in disk management, right-click and select Initialize Hard Disk.

6. Right-click the disk and select New Volume.

7. Click the next step according to the steps of the shed crack and the tour school, and complete.

8. In this way, the system has an extra partition D disk.

Now configure the computer host: in terms of storage, the mainstream recommendation will use SSD hard disk, install the system on the SSD system, it only takes more than 10 seconds to boot, and the experience is greatly improved. For other file storage that is not commonly used, you need to add a large-capacity (1T, 2T) mechanical hard disk, after installing the mechanical hard disk, how to partition the system software?

After installing the hard disk on the computer, turn it on, select My Computer on the desktop of the computer, and right-click "Manage" to enter the computer management interface.

<> memorize the serial number of the disk, if this is disk 0, select the disk, right-click, pop up the menu, and select "New Simple Volume".

<> formatting partitions, there are partition format settings here, and the partition format of NTFS is only supported for large capacity. At the same time, you can customize the name of the disk (volume label). Use Quick Format. Click: "Next" and the first partition is completed.

<> now I open my computer, I can see the newly created partition of each disk, and now I can use the large capacity HDD to store files.

If you have multiple hard disks on your computer, you should be able to set up a primary and secondary hard disk. The most common system boot disk is on the main hard drive partition. The more common ones are solid-state drives, which are used as system disks. Mechanical hard disks are used as data disks.