-
Yes, it can be added. But yours needs to add a very large solid hard drive. This requires a 250g hard drive.
But according to the current price, it is almost 2000 yuan. It's so worthless. Since your computer only has a SATA connector, this drive can be used as both a main hard drive and a storage drive.
So it doesn't make sense to be small.
It's very easy to install a solid hard drive on that computer. Just open the bezel that has no holes in the back, about the size of the hard drive, and you will see the main hard drive. Then remove the HDD and install the HDD.
Tighten the screws. Turn your PC on again. Put in the installation disc.
Remember to boot from the optical drive. If it won't be set. It can be turned on with the ESC key to select.
Then install the system. Generally your computer's memory is in the case of 1333. That is, it will be installed in 10 minutes.
-
The most common way to add an SSD to a laptop is to disassemble the optical drive, buy an optical drive bay, and then install the SSD on the optical drive.
Or the SSD is installed on the main hard disk, and the mechanical hard disk is installed on the optical drive, which can better play the speed advantage of the SSD, because notebooks generally only have the main hard disk is SATA3 interface.
That's how I installed it, the SSD is installed on the main hard disk slot, and the system disk is made; HDD mounted optical drive bit to make a storage disk.
fainted... The one who said that this notebook only has a SATA interface,Dare to ask where the optical drive is connected,Is it connected to the memory slot? In the past, the optical drive was an IDE interface, but now SATA is popular, and the optical drive uses SATA interface.
-
Whether it is a notebook or a desktop, solid-state drives have become standard, when buying solid-state drives, the quality, performance, ** and other factors of the product must be considered When buying a computer, you will choose a 120g solid state drive, many people will ask me if 120g is enough, in fact, it is enough, because the solid state drive is mainly to install the system, so it will be when it is turned on.
-
1. Use 360 Driver Master. Open the software and click Hardware Information.
2. On the information page, the software will automatically detect and see the hardware information, and you can see whether it is solid or not.
3. We right-click on the start icon and continue to select Windows PowerShell.
4. A window pops up, we need to be at the cursor.
5. Type get-physicaldisk and press enter.
6. Wait for a while, we can see the hard disk information, and we can see whether it is an SSD in MediaType.
-
SSD SSD Hard Drive Western Digital Samsung Intel Toshiba Benchmark Computer Host Handmade DIY CPU Motherboard Gaming PC Power Supply Memory HDD Computer Gaming PC Installation Accessories Graphics SSD SSD Hard Drive Solid State Board CPU Power Supply Memory HDD Computer.
-
To give you two tutorials, the process is much the same.
Here's a brief description of the process:
1. Replace the original hard disk with the solid state drive.
2. Start the system with a disc or PE with a USB flash drive. It's best to use Microsoft Discs.
3. AHCI must be turned on before installing the system (the new motherboard is open by default.) All the motherboards bought within a year are new) and do 4k alignment.
-
Yes, generally speaking, after installing the solid state, the solid state drive will be used as a C disk 1, the solid state needs to be partitioned, choose the 4K alignment operation, otherwise the performance will be seriously damaged 2, the solid state drive needs to be used in the hard disk interface mode of AHCI, otherwise it will also lead to a decrease in performance 3, after the partition is good, it is necessary to install the system for the solid state, or clone the original system into the solid state4, after installing the system, the commonly used software and games, it is recommended to put it on the C disk, which can have a significant improvement in boot speed, Because the read and write speed of the solid state is relatively fast.
-
Many users will have a question when using a computer, that is, what is the use of installing an SSD? In fact, the biggest advantage of SSDs is that they are fast. As long as it is related to reading the disk, it will become faster, such as starting the system, opening the software, and entering the game.
So it's still very useful to install an SSD if you have a computer card. Here are a few advantages of SSDs.
The details are as follows: 1. The SSD starts quickly, and there is no motor to accelerate the process of rotation.
2. The solid-state drive does not use a magnetic head, and it reads quickly and randomly, and the read delay is very small. According to the relevant tests: under the same win7 configuration of the two computers, the laptop with the SSD took only 18 seconds from boot to the desktop, while the laptop with the traditional hard disk took a total of 31 seconds, almost half of the difference.
3. Relatively fixed reading time. Since the addressing time is independent of where the data is stored, disk fragmentation does not affect the time of read.
4. The DRAM-based SSD has extremely fast write speed.
5. The SSD is noiseless. Because it does not have a mechanical motor and fan like ordinary hard drives, the noise level is 0 decibels when working. Some high-end or high-capacity products are equipped with fans, so they still generate noise.
6. Low-capacity flash-based SSDs have lower energy consumption and heat generation in the working state, but high-end or large-capacity products will have higher energy consumption.
7. There are no mechanical moving parts inside the solid state drive, no mechanical failure, and no fear of collision, shock and vibration. This does not affect normal use, even when moving at high speeds or even with flipping and tilting, and minimizes the possibility of data loss in the event of an accidental drop or collision with a hard object.
8. The operating temperature range of SSD is larger. A typical hard drive can only work in the range of 5 to 55 degrees Celsius. While most SSDs can operate at -10 to 70 degrees Celsius, some industrial-grade SSDs can also operate in temperatures ranging from -40 to 85 degrees Celsius or even greater.
9. Low-capacity SSDs are smaller and lighter than HDDs of the same capacity. However, this advantage gradually decreases with the increase of capacity. Up to 256GB, SSDs are still lighter than HDDs of the same capacity.
-
How to install an SSD on a desktop: You need to have the SSD and bays ready before you install it. The purpose of the bay is to convert the inch SSD into the inch.
Then snap the other side of the SSD into it and prepare the screw holes. The SSD is mounted on the shelf. It can be installed on the chassis normally. The wiring and mechanical serial port hard disk installation method is the same.
Compared to traditional hard drives:
The interface specifications and definitions, functions and usage methods of SSDs are almost the same as those of ordinary HDDs, and the shape and size are basically the same as those of ordinary inch HDDs.
Solid-state drives have the characteristics of fast read/write, light weight, low energy consumption and small size that traditional mechanical hard disks do not have, and their disadvantages are also obvious. Although IDC believes that SSDs have entered the mainstream of the storage market, they are still relatively expensive, with low capacity, and it is difficult to recover data once the hardware is damaged. There are also those who believe that SSDs have a relatively short endurance (lifespan).
-
SSDs can dramatically improve boot up and file reads on your computer, which in turn improves your computer's overall performance.
SSD (Solid State Disk), which is a solid-state electronic storage array hard drive. It consists of a control unit and a solid-state storage unit (flash chip). Our common USB flash drive and mobile phone memory card are also composed of this kind of unit.
The structure of a traditional HDD is similar to that of a cassette tape or vinyl record, with a magnetic disc recording data, rotating at high speed while running, and the head transmits the data to the computer.
SSDs, on the other hand, do not read data from probes, but with logic circuits. In terms of performance, SSDs can kill ordinary hard disks in seconds, and SSDs also have advantages over HDDs in other aspects, such as SSDs win in terms of volume and weight, SSDs are completely silent and vibration-free, with lower temperature and lower power consumption.
120G SATA interface SSD,Performance、Particles、*** is Samsung850Ppro,Followed by Puket M6Pro,5 years ago I bought Intel 320 120G,Micron M4 64G is still used on old computers,I have tried M4 64G and Pukett M5P 256G Win7 system boot test boot test startup time is 9 seconds (computer manager test),So if you don't care about running scores,There's no need to buy expensive ones at all, If the motherboard supports buying a PCI-E or interface SSD that supports PCI-E X, the speed is fast enough, of course, it can only be seen when there is big data reading and writing, and it is usually used the same as the mainstream SATA interface SSD. >>>More
1. Normally, a 120G SSD is enough for the computer, if it is not enough, you can add a mechanical disk as a storage disk. >>>More
Solid-state arrays should not be grouped casually, because the previous array cards did not recognize the SSD, because there is a problem with 4K blocks, so the writing of the SSD is a problem. >>>More
There is no problem with two hard disks on the computer. There are several hard disk ports on the computer motherboard, and several hard disks can be installed. You plug the hard disk with the system into the socket of SATA1, and plug it into the socket of SATA2 as the hard disk of the storage warehouse (in fact, as long as the hard disk with the system is plugged into the SATA1, you can plug it into the hard disk of the warehouse). >>>More
Find the computer management in the control panel, generally in the performance ......Management tools ......Computer management. >>>More