Why does the 10th generation Accord luxury sometimes reverse and cut into R gear and not go?

The reason why an automatic transmission car cannot reverse can basically be judged by the transmission in most cases.

First of all, check whether the oil volume of the transmission is too small, whether the main oil pressure and gear oil pressure are normal, and then check whether the gear switch signal is normal, whether the transmission computer to the shift solenoid valve circuit is good, whether the gear solenoid valve is working normally, if there is no problem, it means that there is a problem with the internal control system of the gearbox, and the gearbox should be disassembled to check the internal actuators.

In addition to the above transmission reasons, you can check the gear position (shift mechanism) and the auxiliary switch. To see if there is a shift jumping action or behavior, you can try to change gears back and forth, or feel obvious vibration, jitter, etc.

In the case of a fluid transmission transmission (automatic.

Overhaul than mechanical gearbox (manual transmission.

Maintenance is much simpler, but due to the simple structure, maintenance should be careful, often it seems that there is no problem and a leak will cause rework.

Cold car, bang the throttle might be better. Or the brake is not in place and the gear is not in place, the gear is not hung up, or the gear shift speed is too fast, and this will also occur when the oil is given immediately after the reverse gear is hung. After the reverse gear is engaged, there is a delay in the trip computer, about a few seconds, before it can properly cut into the gear, and the reverse is normal.

The configuration of the 10th generation Accord luxury is still good. The appearance of the winged headlights is super cool. The shape of the big slip-back, young and sporty, very in line with the aesthetics of young people, Honda's designer is bold, by reducing the height of the body and adjusting the angle of the column, not only let the Accord have a smart side face, but also give her oncoming graceful and luxurious aura and heritage.

Whether it is red, white, blue, or black, the flickering and moving figure and the change of Ambilight give the Accord a natural and versatile temperament.

Starting with the Elite version, the high-power engine is actually equivalent to a larger displacement model, so if I have the conditions, I will still choose the high-power engine. And from the configuration, the elite version has more side air curtains, electric adjustment of the main and auxiliary seats, reversing image, cruise control, leather steering wheel, bilateral dual exhaust pipes, etc., this 10,000 yuan can be said to be very value-for-money, and it is quite cost-effective if the budget is enough.

The luxury of the Accord, in addition to the dedication to design and performance, also lies in the respect for life, and "Japanese cars are not safe" should have become a popular opinion a long time ago. The American Highway Safety Society (IIHS) crash test safety standards are the most stringent in the world, even so, in the IIHS annual top safety car rankings, Japanese cars have been "slaughtering the list" for many years, and the Accord has always been a frequent visitor to the top safety list.

It must be something wrong with the car, how can this happen, this is a normal phenomenon, and ordinary cars will have it.

This is a normal phenomenon and will be found in most cars.

This could be a breakdown of the car.

You must have not stepped on the gas.

There must have been a problem with the car.

It could be because there was a problem with the design, and it could be that the car was out of order.

There must be something wrong with the car, how could this happen.

It's possible that something went wrong with the design.

How could this be?

I haven't learned much about this issue yet.

Hello, we are happy to serve you and give you the following answer: This situation may be due to a problem with the vehicle's electrical circuit, or a failure of the vehicle's control unit. There are several ways to solve this situation:

1.Check the circuitry of the vehicle, check if there is an open circuit or short circuit, and if so, you can try to repair or replace the circuit. 2.

Check the vehicle's control unit, check if there are any damaged parts, and if so, try to repair or replace the control unit. 3.Try to reprogram the vehicle's control unit to ensure proper operation of the vehicle.

4.If none of the above methods can solve the problem, you can try to send the vehicle to a professional car repair shop for inspection and repair by a professional technician. Personal Tips:

When repairing a vehicle, you must pay attention to safety and do not easily try to repair it yourself, so as not to cause unnecessary losses.

Check if the transmission oil level is normal! If it is normal, it is possible that the transmission clutch burns out.

1. When the signal of the position sensor of the gearbox shift valve of the vehicle is wrong, it cannot perceive what gear it is in;

2. There is a problem with the shift valve, the gear is not in place, and the oil channel cannot be opened;

3. The solenoid valve and electronic module of the gearbox are faulty;

4. The oil volume of the gearbox is too small, or the internal oil pressure is too low;

6. The handbrake is not put or loosened to the end;