What graphics card does the MSI P43 C51 come with???

Dual-core is best on e8500, quad-core Q9300, but quad-core power consumption is too high, single-core performance is low, it is recommended that you can dual-core, they are all second-hand, cost-effective, e8400 is the best.

Memory,It depends on the specific board model,DDR2 or DDR3,Generally speaking, P43 should be DDR3,But it should be noted,P43 only supports double-sided DDR3 memory,Single-sided is not supported。

Low-end E2220, mainstream E5300, high-end E7400

800 or 1066 on memory can be chosen.

The motherboard of the P43 is all-you-can-eat at the high, medium and low-end, and I also use the motherboard of the MSI P43, but the one on it is a 4-core U.

The current MSI P43 Neo3-F (, the high-end version of the MSI P43, four-phase power supply, all-solid-state capacitors, copper tube heat dissipation. With quad-core Q8300, Colorful 9600GT Flame God of War 95W graphics card, 3 Kingston DDR800 memory (2G+1G+1G) No problem. There is no problem with 1G memory being a single noodle, some people say that it is not compatible with a single noodle, it may be a DDR3 generation memory board.

It should be noted above that the quad-core U is better to use a four-phase power supply board, and it also supports overclocking, MSI P43 has more three-phase power supply, and there is no problem with three-phase use in dual-core U, but overclocking may be limited when used in quad-core U.

Intel 755-pin CPU, DD2R generation memory is OK.

The CPU supports the Intel Pentium E5 series CPU, and the memory supports up to DDR3-1066 (physical support, that is, you can insert DDR3-1333 memory on the motherboard, but the motherboard will reduce the frequency from 1333 to 1066 for use).

MSI P43-C51 Processor Specifications:

CPU platform Intel

CPU Type: Core 2, Extreme Core 2, Quad Core 2, Duo

CPU socket LGA 775

CPU Description: Intel Socket 775 interface processor supports 1 CPU.

The motherboard can support LGA775 CPUs, including the Intel Pentium E5X00 series CPUs mentioned by the landlord. If you don't already have a CPU, it is recommended to replace the Pentium with the Core 2 series.

MSI P43-C51 supports memory specifications.

Memory type DDR3

Memory slot 4 DDR3 DIMM

The maximum memory capacity is 8GB

Memory Description: Supports dual-channel DDR3 1066 800MHz memory.

As long as it is an Intel 775-pin CPU, it can be used with DDR3 memory.

No. This motherboard does not have an integrated graphics card, does not insert a discrete graphics card, and has no display when it is turned on.

G43 comes with integrated graphics.

P43 is a P-series that requires an external PCIe graphics card.

Your motherboard supports DDR2 memory.

DDR2 should now support 2G capacity for a single strip.

4G single desktop is rare, and it is generally used on servers.

If you buy it, it is recommended to buy a single 2g one!

If you have 2 1g sticks on hand, you can also plug them in and try it. The only thing that doesn't hinder is that the higher the number of memory modules, the greater the chance of compatibility issues and the impact on stability.

Generally, if you can add less, you can add less.

It can be considered according to your own effect.

There is no problem with the motherboard's support.

If you don't change to 64-bit win7, add 1 is enough!

It should be possible Win7 supports 4G

The motherboard has 4 sockets, which should not be a big problem, but it is still recommended that you directly use two 2G slots in different groups of slots, because using 4 1G slots may automatically reduce the frequency due to bandwidth limitations.

Yes, the motherboard supports up to 16G memory.

Brother, DDR2 memory, and very early processors, now upgrade other accessories, such as upgrading the graphics card will have a bottleneck, the CPU is now excused by 1155 pins, yours is 775 pins, the interface is not right! It is recommended that you want to play games and install a computer, even if you have a CPU, it is not necessary to use it for a long time, and there are many problems!

The board I use is super Q66, and I'm using it now, but the Q series** is not good, so it's not recommended.

On the E8400, all right.

E8500 is also available.

It's just over 100.

Are you waiting for someone to come back to 771, or 775?

The slag board is not good, who uses it knows.