My Xiaomi phone can t be turned on after the factory reset, and then I flash the phone, and the scre

It is recommended to brush the official package and brush back to the official system.

1.Connect to Qitu Line Brush Master, and it will automatically recommend the line brush package that can be brushed in;

2.Select the appropriate official firmware and click to flash it.

The phone is bricked and I can save it.

Line brush treasure is an Android smart line brush tool, supporting most of the Android mobile phone brands and models on the market,。 The line brush treasure is not only easy to use, but also provides a large number of flashing packages** and a complete flashing tutorial, one-stop service allows you to easily solve the problem that the mobile phone cannot be turned on!

So how do you do it?

1. **Line brushing. 2. **Mobile phone flashing package 3, follow the flashing tutorial step by step, easy to flash! In this way, even if your phone can't turn on, or if you fail to flash, you can easily get it!

Flashing failed, which is mainly due to the system instability, poor compatibility, or poor compatibility of the flashing package, resulting in system crash or boot file corruption.

The reason may be that there is a problem with the flashing bag itself, or the power is cut off or manually operated during the flashing process, and the flashing takes a long time, so the battery is fully charged before flashing.

Because when the phone is flashed, it is deleting the system to add or modify programs, which takes a long time. Just re-flash a different version of the flash pack.

Xiaomi mobile phone is a very popular mobile phone brand, but it is inevitable to encounter various problems in use, among which flashing on boot is a common problem. So, how to keep flashing when the Xiaomi mobile phone is turned on?

First of all, we need to understand the reason for the boot flickering. Flashing at boot is usually caused by a problem with the system or damage to your phone's hardware. Therefore, we need to address this issue on a case-by-case basis.

If it is a system problem that causes the boot to flicker, we can try the following methods:

1.Force restart your phone. Press and hold your phone's power key and volume down button until your phone restarts.

2.Enter Safe Mode. Press and hold the volume plus button and the power button until the Xiaomi logo appears on the phone, then release the volume plus button after the phone is fully powered on.

Once you're in safe mode, you can try clearing your cache or uninstalling some apps that might be causing problems.

3.Update the system. If your phone is connected to Wi-Fi, you can check the System Update Center to see if there is an update. If so, try updating the latest system.

If none of the above methods can solve the problem, it may be caused by damage to your phone's hardware. At this time, we need to send the phone to the after-sales repair center for repair or replacement parts.

In short, it is a relatively common problem for Xiaomi phones to keep flashing when they are turned on, but we can solve this problem with the above methods. I hope the above content can help users who need it.

If you can enter recovery, flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash (power button to confirm, volume up and down keys to move), the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double wipe, friends who know about flashing must have heard of it.) )

Select Install Zip from SDCARD Press the power button to confirm, then select choose zip from sdcard and press the power button to confirm, then select the rom flash file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! This is the end of flashing.

Hi! Plug the battery into it while holding down the volume |+ and the boot key to enter the official defense recovery, select Chinese, then go in and select Clear Data, clear all data, and then restart to try.

Here's how to fix it:

1. Three-clear data. Go to Recovery. Ways to get into recovery:

In the shutdown state, first press and hold the "Volume Up Button" and then press and hold the "Shutdown Button", and let go when the boot screen appears, and then you can enter recovery. If you can enter recovery, please switch the system under recovery and back up the data, if it can't be successful, you need to erase all the data (contacts, text messages, phone apps, etc. will disappear).

2. There is a problem with the mobile phone system and cannot be recognized. Whether it can enter fastboot. Ways to get into fastboot:

In the shutdown state, first press and hold the "Volume Down Button" and then press and hold the "Power Off Button", and let go when the boot screen appears, then you can enter fastboot. Please connect your mobile phone to the computer and flash a complete system package with the method of miflash.

3. Mobile phone hardware problems. At this time, the only way to take the phone to the repair office for maintenance is to do so.

There's no way.,Xiaomi has a lot of problems.。。。

This is mainly due to the system instability, poor compatibility, or poor compatibility of the flashing package, resulting in system crash or boot file corruption.

Try to solve it with the following method:

1. Restore factory settings.

1. Press and hold the power button to power off.

2. Press and hold the volume down button + power button at the same time. The boot screen appears, release it.

3. Through the volume up and down, select wipe data, OK (the volume button is selected up and down, and the power button is OK), the option appears, and yes is selected.

4. Automatically return to the menu and click Wipe Cache.

5. Finally, select reboot to restart.

If it is a Chinese menu. Select Perform data purging and Cache purging, respectively.

2. If the above methods can't solve the problem, try to fix it with the brick saving tool of the flash tool.

1. Install the flashmaster on the computer and turn it on.

2. Turn on the power of the mobile phone and connect it to the computer.

3. Choose a brick saver with a tool, and the repair is OK.

3. If the above methods cannot be solved, it is likely to be a hardware problem, and it is recommended to find a maintenance personnel to solve it.