Why can t the flute bass sound?

If it is made of metal, the key may be crooked or the body of the flute may be bent, resulting in air leakage.

The former case is easier to adjust than the latter, but it requires professional tools.

If the landlord is from Tangshan, I can help you get it.

The wooden one is more troublesome, but the landlord's is not like a wooden flute - who can fall on the wooden one.

It may be that the two keys of the little finger are loose or crooked, and you need to adjust them. I used to buy a flute on this problem, and the teacher adjusted it at that time, but there was no improvement, and it was probably a factory problem. But you may need to adjust it professionally.

Hey, I've had a small air leak in a temporary flute.

There is a quicker way, I saw my teacher temporarily repair, is to take a puff of cigarette, and then tell me to hold down all the holes of the flute (and the end of the flute body is also blocked), and then, he poured all the smoke into the mouthpiece, and if the place is not tightly sealed, a little smoke will leak out.

Then inspect the mat in that place and tighten the screws to make it tightly sealed and ......However, the problem is that this flute smells big for a week" Well, you are not in a hurry to send the piano shop back to the factory for repair, I remember that I actually returned for 1 month before coming back But the quality of maintenance will be better.

It depends on whether you have an open-pore flute or a closed-hole one.

If it is an opening, it may be that you have not blocked it well, it is recommended that you first plug a few holes with the plug attached to the flute, and then slowly open them one by one, generally blocking the ring fingers of 2 hands.

If it's a closed hole, it's possible that your mouth is not in the right shape, and when blowing bass, the hole should be slightly larger.

If it's not your own fault, it is recommended that you go to a musical instrument repair shop to repair it.

The flute, a finely crafted instrument, must be well cared for.

It should be that the key is out of breath, it's best not to do it yourself, I've also encountered this kind of emergency, it's best to learn more by yourself. Also, if you say you want to use it, then you should be able to see your teacher and let him see it, it's not a big problem.

What is the key of the opening hole blocked n If you block it with your hand, it shouldn't be a problem with the flute Do you think it's all blocked, as long as there is a finger with a small slit left in the bass, it will definitely not be able to blow out, and it may also crack.

Tighten the screws of the shuttlecock, basically for this reason, it should be no problem! If it doesn't work, send it to a professional technician for repair!

Take a look at the location of the flute wire.

If you are so careless, it is recommended to go to the piano store and ask a professional to take a look.

There are two reasons why the flute bass is not good to blow, the first is that the method of using the air is wrong, and the air should be slow and concentrated when playing the bass. The second is that some keys at the tail of the flute are not tightly sealed and need to be maintained and repaired, especially for cheap and shoddy products, which must be paid attention to.

The sound of the flute is based on the fact that the player sends air to the edge of the flute hole at a special angle, and a local air flow enters the flute and vibrates, and the flute wall and the air flow vibration reach a consensus to recover the loud sound.

Of the flute's several registers, the bass is relatively difficult to play. The reason for this is that the pitch of the music played by the flute is determined by the shock frequency of the air column inside the flute tube. The higher the shock frequency, the higher the pitch, and vice versa.

The shock frequency of the air column is determined by the urgency and pressure of the blower's aspiration.

Therefore, when we play the low register of the flute, it is necessary to use the air supply method in the middle and even the high register, and the bass requires a slow and low pressure airflow. However, there is a degree of certainty here, because the wall head of the contemporary flute is made of metal and is relatively thick, if the air flow is too slow, it will be difficult to make the flute wall vibrate with the air flow after entering the flute, so that the consensus will occur, and it will be difficult to recover the loud sound.

In other words, when we invent that the bass can't be blown out, we have to check which of the following problems I have:1The lips are closed too tightly, and the air is too urgent, so that the sound that is played will always "rise", instead of the solid bass I want.

2.I don't have enough air, my lips are too loose, and I blow a bass, but I feel that the sound quality is not good, and I may not be able to blow anything.

Regardless of which of the above conditions, it is clarified that the aspirated pressure and the speed of the flow divergence used by the player are suitable for blowing in the low register. The accurate blowing method should be: in the normal form of playing alto, the lips are slightly loosened to make the air outlet larger, but what needs to be noted here is that the lips still have a certain sense of pressure, and the inside of the lips must not be separated from the teeth when aspirating; The inside of the mouth is slightly raised, and all mouth movements resemble yawning patterns.

Isn't the pad of the flute not tightly covered, so it is easy to blow without sounding.

The quality of the pad is related to the method, the neck does not matter, the feeling of using the gas, the mouth is slightly smiling but relaxed, the mouth is open, the seal should be good (grinding in the mirror), remember not to blow blindly because it can't be blown, especially the bass, some years have not been blown ......Khan wanted to practice the above notes, slowly come down, and find ...... feeling

Mine is:1Related to musical instruments.

Some low-grade flutes are easy for beginners to have the problem that the bass can't go down and the treble can't come up In addition, maybe there is a problem with a certain detail, take it to the teacher or the teacher of the piano shop to see, sometimes the screws may be loose, and there will be individual sounds that do not sound 2Technical issues. If you exclude the above possibility, that's probably it.

No one can do anything about this, everyone has come over like this, practice more, blow more, and go down. It may be that the mouth shape is wrong, it may be that the airflow is not properly mastered, because the airflow of the bass and the airflow speed and mouth shape of the treble are slightly different, and it is still necessary to ask the teacher, and it is not clear on the Internet.

If the flute is not put away, it will affect the lack of code quality of the sound, and I put it away if I put it away.

Yes, you must keep it well every time you use it, otherwise the mulch will rupture and the timbre will change.

Don't hold the flute with your backhand, in the future, if you develop a hidden sail and want to play the flute, you can't change it - the flute only has a forehand.

Forehand - the sound hole is on the right side of the mouth, the tip of the right finger is forward, the ring finger, middle finger, and index finger are pressed in the order of one, two, and three holes, and the left hand is in front.

The top of the anti-sell resistant, pointing to yourself, three fingers in the order of four, five or six holes. Hold the body of the flute with your thumb and little finger nearby, and carry the spring in the middle to stabilize the flute.

Why do you say so verbose?

I once saw a man who was already proficient in playing a song -- it was a forehand, but his right hand was on top and his left hand was down -- oh my God!

Gemstones are one of the most beautiful and valuable types of ores in rocks. They are bright in color, crystal in texture, brilliant in luster, hard and durable, and scarce at the same time, and are natural mineral crystals that can be used to make jewelry and other purposes, such as diamonds, crystals, emeralds, red annihilation treasure banquet repentance stones, sapphimones and chrysoberyls.

When you play a bad tone, your ears can immediately realize that "this tone is not tolerant and good, I need to adjust it"2 I have always felt that the ** family and athletes are very similar to the world, and we need to understand the body function.

First use a pipe such as a pen tube (one end is closed and the other end is open) to practice blowing, after you can blow, try to control the sound of the same height and size, and the time can last, and then change to play the flute, it may be better.

When playing the flute, the lower lip covers about a quarter of the blowing hole, the fingers press the flute hole, do not leak, try to blow repeatedly, if you are lucky, you can blow it in a few clicks, if you are unlucky, you can blow it in a few minutes or ten minutes. . .

The fingers are not pressed tightly, and the hole that should be blocked is leaking.

Careful Edition:

First of all, you must consult your professional teacher, and you can also confirm with the seller.

If you are told that this flute is fine, you need to check that there is no problem with your playing.

In general, it's not a flute problem, it's a mouth shape.

The following is the method of lip shape (small suggestion: you can often blow the pen cover to practice mouth shape) to smile and then pull the corners of the mouth apart while smiling.

A small slit opens in the middle of the mouth, about the width of a melon seed.

Then rest your mouth against the flute, which can be positioned with your tongue or adjusted slowly.

Simple version: Find a pen and the pen cover blows loudly, it is not a problem of mouth shape or flute, and whether it blows or not is a problem of mouth shape.

In order for the flute to make a sound, there are several aspects to be paid attention to.

1.Whether the diaphragm has been affixed or not.

Follow what you say. , already pasted)

2.Posture is the contact surface between the flute and the shape of the mouth.

3.Breath is to concentrate the breath and blow as much breath as possible into the flute hole.

You can check whether the mulch film is damaged and loose, in this case, it is recommended that you first replace the flute film with transparent glue, and then hold both ends of the flute with both hands, put the flute horizontally under the lips, and blow the breath out of the middle of the lips with both cheeks to **. You can try to turn the flute body and try different angles, and it will be easy to blow the flute.