The seventh generation of the Honda CBR1000RR

Updated on Car 2024-05-18
8 answers
  1. Anonymous users2024-02-10

    Damao** is about 230,000, and 15 new parallel goods ** are more than 80,000.

  2. Anonymous users2024-02-09

    CBR1000,,, There are no new ones in China, all the waterwheels, and the years are near, such as about 30,000 after 08 years. Inside. It's a waste of commuting to work.

  3. Anonymous users2024-02-08

    About 89,000!

    hondacbr1000rr

    Spec sheet Engine form: Four-stroke oil-cooled DOHC

    16-lobe side-by-side 4-cylinder version bore.

    X-stroke: mm compression right.

    Ratio::1 Total displacement:

    998cc frame form: aluminum alloy double spar frame frame.

    Transmission system: wet multi-piece 6-speed front-speed chain drive.

    Fuel oil**. 44mm

    PGM-DSFI Electronic Fuel Injection System.

    Tilt angle (R): Trailing distance (t): 102mm

    Front suspension: 43mm

    HMAS inverted casing fork, stepless full-function adjustment, 120mm stroke rear suspension: unit

    pro-link

    HMAS monotube hydraulic suspension, 13 levels of preload, stepless compression and rebound adjustment tires (front): 120 70-17

    Tires (rear): 190 50-17

    Front Brake System: 2

    x310mm brake disc, 4-piston opposite caliper.

    Rear brake system: 220mm single disc with single-piston caliper x length x width

    High: 2125

    x750x1085mm

    Wheelbase: 1410mm

    Minimum ground clearance.

    130mm cylinder capacity: 18 litres.

    The products have CCIB logo, with invoices, certificates, certificates of import goods, imported motor vehicles with on-board inspection sheets, and a variety of new arrivals.

  4. Anonymous users2024-02-07

    The date of manufacture is on the glass of the car, and the year of the car is the same as the year of the car. Find the VIN code of the vehicle, the tenth digit or letter represents the year of production, 1 to 9 corresponds to 2001 to 2009, A is 2010, B is 2011 and so on, there are three main ways to see the production year of motorcycles, one is to see the certificate, this is the most accurate, and the other is to look at the nameplate on the frame.

    The third is to look at the frame number.

    and engine number, but the engine number is not very intuitive, and it can be queried by the shed dust frame number.

    Introduction to the Honda CBRIn 1983, Honda officially launched the CBR series of road sports cars, it is CBR400F, launched in December 1983, the name CBR400F, factory number NC17, the use of sub-factory number is NC07E, air-cooled four-stroke DOHC inline four-cylinder engine, starting the Zen machine using REV technology, for the future supercar.

    A lot of experience has been accumulated, and it can be regarded as the predecessor of the CBR-RR series.

    At this point, the CBR900R era is also coming to an end, starting from the seventh generation, CBR1000R has officially entered people's sight, which is also the official CBR has truly joined the ranks of public supercars.

  5. Anonymous users2024-02-06

    190,000 yuan. The Honda CBR1000RR is a motorcycle developed from the CBR 900RR, and the "Fire Blade" logo is called the "Fire Blade", and they have a toughness that cannot be underestimated like a spark. The Honda's consistently good handling extends the vehicle's combat effectiveness infinitely, and the sharp twin headlights are not arrogant.

    Fire Blade (1992-1994) The first generation of the Fire Blade was launched in 1992, when its body and power immediately shocked the car world, excited fans around the world, and soon became the best-selling car in its class. Following the trend, its shape was quite beautiful for its time.

    The use of popular round twin lamps, and the first use of small holes on the outside of the lamp as air inlet holes, unique. The fuel tank and rear tail are streamlined design, and the whole vehicle is integrated and powerful. The original tiger flower is also loved by car lovers, and there are many cars with it today.

    Unlike the rest of the range, it uses 16-inch front wheels and 130 70-16 front tires to highlight the features.

  6. Anonymous users2024-02-05

    Engine type: in-line four.

    In-line four: 999cc

    Cylinder: **: $13,999 Note this is in USD.

    Gears: Close-ratio 6 gears.

    Front tires: 120 70ZR-17

    Rear tires: 190 50ZR-17

    Front suspension: piston fork preload adjustment; inch travel.

    Rear suspension: Balanced damping oil flow components preload adjustment.

    Wheelbase: Compression ratio: 1

    Fuel tank volume: 15l

    Dry weight: 200kg.

  7. Anonymous users2024-02-04

    Engine type: in-line four.

    In-line four: 999cc

    Cylinder: **: $13,999 Note this is in USD.

    Gears: Close-ratio 6 gears.

    Front tires: 120 70ZR-17

    Rear tires: 190 50ZR-17

    Front suspension: piston fork preload adjustment; inch travel.

    Rear suspension: Balanced damping oil flow components preload adjustment.

    Wheelbase: Compression ratio: 1

    Fuel tank volume: 15l

    Dry weight: 200kg.

  8. Anonymous users2024-02-03

    The performance of the 2013 CBR1000RR basically refers to the 2008 model, the North American official website is marked with 13800USD, and the new **153800-158000 Hong Kong dollars in Hong Kong, because there is no licensed goods in China**, so there is no talk of paying taxes, and now the ratio of parallel goods is almost 1:1

Related questions
19 answers2024-05-18

The CBR1000RR and VTR1000 SP-2 are two completely different styles, with the CBR1000RR having a smooth and quiet inline-four engine, while the SP-2 is a noisy V-twin engine. Anyone who plays with cars knows that the power of the V-cylinder sports car is more fierce than the car with the in-line cylinder, the acceleration is faster, and the vibration is of course greater than the 1000RR, and the same is true for these two cars, both are 1000CC sports cars, and the power of the SP-2 feels stronger than the 1000RR, and the V twin engine creates the narrower body of the SP-2, which means that the cornering performance of the SP-2 is better than that of the 1000RR, and the fact is that the SP-1, SP-2 and RC51 all have the title of "King of Corners". Designed to be Honda's top-of-the-line supercar, the CBR1000RR is ultra-lightweight, with high detailing, and more recent cars are equipped with directional dampers that adjust the force according to speed, and it has run the best results in multiple 0-100km h acceleration tests. >>>More

4 answers2024-05-18

The easiest thing is to look at the header. Native 13,000 rpm. Exit 14000

12 answers2024-05-18

The maximum speed of the Honda CBR600RR F5 is KMH.

Stand-alone CBR600RR. The CBR600RR, which is based on the Honda MotoGP RC211V factory car, has been a global hit since its launch. In '05, Honda introduced a facelifted version of the CBR600RR, with the same horsepower output, but with the addition of an inverted fork and radial caliper code, making Honda's middleweight supercar the same as the most popular elements of the previous one. >>>More

4 answers2024-05-18

Reasons for oil stains around the CBR1000 oil cap: >>>More

45 answers2024-05-18

Motorcycle, Honda. This 1500 block also belongs to the normal speed. If you want a door, you can go even lower. >>>More