How to fix a broken laptop system

You can go and reinstall the system! Or one-click restore is also possible!

First, the cause of the failure:

1. The system file is corrupted and cannot enter the operating system.

2. There is a virus in the system, and the antivirus software cannot deal with it.

3. There are various errors in the system, and it is more troublesome to modify the settings, so it is more convenient to reinstall the system directly.

4. The system runs slowly, and all kinds of junk files increase.

5. I want to change to another version of the system.

6. If you replace the new hardware, you can't enter the system, such as hard disks, graphics cards, etc.

2. Solution:

1. Restart the computer and choose to start the computer with the most recent correct configuration.

2. Delete the detected D: Windows System32 Drivers error file.

3. It is recommended to reinstall the system.

Methods for factory reset of ASUS laptop:

1. Before booting into the system, press F8 to enter the advanced boot options of Windows 7 and select "Repair Computer".

2. Select the keyboard input method.

3. If there is an administrator password, you need to enter it; If you don't have a password, just "OK".

4. Once you are in the System Recovery option, select "Dell DataSafe Restore and Emergency Backup".

6. Select "Restore My Computer" and click "Next".

7. After selecting the correct factory image, click "Next" to start restoring the system to the factory state.

Note that the notebook needs to be connected to an adapter during the recovery process. When you're done, restart your computer.

Try to replace the power battery first, if it doesn't work, the parts of the machine itself are loose or the chip is damaged by virtual soldering, common reasons: the memory is loose or there is a problem with the memory itself, reinsert the memory or change the memory to try.

If you have a backup system, you can restore it, and if you have a backup, consider installing the system.

Boot F2 into BIOS---Boot---Boot Dvice Priority Settings*** Boot, and click the Enter key a few times when selecting *** to boot to enter the installation interface.

Press the power button and press the F8 button continuously to select the last normal start mode.

Let's reinstall the system.

Take it to the store you bought and fix it.

The first step is to enter the BIOS by holding down the Delete key while booting the laptop, selecting the Advanced BIOS Features option, and pressing the Enter key to enter the setup program. Select the First BootDevice option and press the Page Up or Page Down key on your keyboard to set it to CD-ROM, so you can change the system to CD-ROM boot.

Step 2: Go back to the main menu and save the BIOS settings.

Laptop reinstall system method.

Step 3Put the disc into the optical drive, and restart the laptop, the system will boot from the disc and display the installation wizard interface, and then follow the prompts to do it step by step.

The laptop system is broken, and you need to reinstall the operating system, the specific steps are as follows:

To first enter the BIOS, set the system from the disc to boot up, with the Delete key. The ESC key has a variety of different keys such as pressing F12 to enter the BIOS, and the specific self-test.

Select the boot item, find First Boot, select CD-ROM, F10 save and exit, and the system restarts again.

System restart,There will be a system installation interface,Click the start installation button,You can start installing the operating system,The whole process is fully automatic,No manual operation,Wait for the restart,The system installation is completed。

How to tell if the system is broken, what error prompts.

Do the system, or go into safe mode.

(1) Sony notebook operating system is broken, you can reinstall the system, generally Sony notebooks have a one-click restore function, but there is a premise, which is that the hidden partition and backup image are not damaged, you can restore and reinstall the system with one click.

2) Methods and steps of one-click restore of Sony notebook:

1) In the case of a complete shutdown, press the assist button and select "Start Troubleshooting (Repair)" according to the prompts (the interface may be different for different models).

2) Then select the first item to reply to the maintenance system, and then select Microsoft Pinyin, select Troubleshooting, select Vaio Recovery and Solution, select Win8, and then enter Vaio Care (Rescue Master Mode).

3) Enter Vaio Care (Rescue Master Mode), follow the prompts for one-click recovery, and then select the second item: Tools Select Start Advanced Recovery Wizard Select Skip Data Rescue Finally, check Start So that the recovery of the system begins, about 40 minutes to 1 hour, and the system will restart after the recovery, which means that it is successful.

Sony's system.

In general.

When the computer is powered on, the VAIO logo appears, and pressing F10 immediately will take you to Sony's recovery interface.

But only if your recovery system is not formatted.

You can give it a try.

If it can be turned on, use its system restore function to fix it, otherwise reinstall the system.

One-click restore, F2 or F8, and then press and hold when restarting, try.

Yeye Tian is right, I won't repeat it.

The answer may be that the 0 track of the hard disk is damaged, and sometimes it can enter the system by using the reset key a few times or Ctrl+Alt+Del. It is recommended to reinstall the system, otherwise this problem will often occur in the future.

Question: Which reset button is it?

There are three common reasons for the white screen when it is turned on.

First, the screen cable is damaged or the contact is not good.

Two, the screen itself is damaged.

Third, if there is a problem with the power supply of the motherboard to the screen or the virtual soldering of the graphics card chip, it is recommended to send it for repair and testing.

If the screen is not completely black at all. This is not a problem that can be solved by simply installing the system. It's a hardware failure. You need to go to the repair shop yourself to solve the problem. (Accessories needed).

If the computer has a one-click rescue, try it;

If it doesn't work, reinstall the system, simple and rude:

The only problem is that the desktop file is gone, and the C disk (the disk that houses the system) is gone;

If you can access the computer when you reinstall the system, back it up first;

If there are any important documents that cannot be moved, it is recommended to go to a repair shop.

The causes may generally be as follows:

1. The boot disk of the BIOS setting is wrong, and the boot disk is set to a CD, floppy disk or U disk, etc., and it happens that there is a U disk, floppy disk or CD on the computer;

2. The hard disk is not in good contact.

3. The hard disk mode is set incorrectly.

4. Hard disk MBR error.

5. Check the optical drive, U disk, floppy disk, etc., and take it out if there is any;

6. Enter the BIOS and set the hard disk boot as the first boot disk in the boot item settings, and try to reboot whether it can be booted;

7. Enter the BIOS, modify the hard disk mode, and try to restart it after setting different modes to see if it can start;

8. Disassemble the chassis, unplug the hard disk cable and reconnect it, and then try whether it can be started; During the boot process, listen to and touch the hard disk with your hands to see if the rotation is normal;

9. Press Ctrl+Alt+Del to restart the computer.

10. Press F8 to enter the mode, and select the latest correct configuration or normal start.

The above methods can't solve the problem, reinstall the system.

Only the system can be reinstalled.

Purchase a system disk to install it.

Go to a physical repair point to install the system.

Your computer should have a driver, it's very simple, you just buy a system disk, it's sold everywhere, and it's cheap, but it's pirated, (the genuine one is a little expensive, and a lot of software doesn't support it).

Take it out and install a system on the street, if a friend has a CD or portable hard disk, you can borrow it to install one!

Just reload, do you need to post?

Please find the instructions to see if there are any instructions for recovery, and if so, follow the instructions. Generally, there should be two types: hard disk image recovery and optical disc recovery. Please refer to Method 1 and Method 2 below.

Method 1: Restore a hard disk image.

Do it according to the instructions in the manual (or called the user manual), generally press F8 to select system recovery when you boot up, etc., please strictly follow the user manual.

Method 2: Restore with recovery disc.

1. Find the random disc of the computer and find the system recovery disc.

2. Put in the disc and restart the computer.

3. Follow the prompts in the user manual to recover.

If you don't have a user manual, the notebook itself doesn't have a backup image.

You can find a ghost disc by yourself, and then restore it, about the practice of the ghost recovery system, there is a search above, and I won't say more here.

If it's just that the operating system is broken, it's not expensive to repair, and it's basically free to find someone around you who will repair it, but if it's hardware damage, you have to look at it specifically**, and remember to back up relevant information with a USB flash drive system before reinstalling.

This is very simple, it is recommended to find a friend who understands it directly to help you install, if you really can't find it, generally twenty or thirty go outside to install it.

If the system is broken, reinstall one, you go to the after-sales maintenance point of your notebook, it is not costly, you can also learn from them how to install the system, and after you want a system disk, you can install it yourself.

Find someone to settle twenty or thirty dollars, use the disc to repair if there is a system disc, and reinstall the system if there are no important files on the system disk or desktop. It is recommended that novices buy one-click ghost system discs, or you can buy your own U disk with PE installation, (novices are not recommended to install it on the physical machine) Of course, it is better to install a one-click restore on the computer. It is recommended to install a virtual machine to repair and install the system in the future.

Reinstallation, depending on the situation of the computer dealer in different places, ranges from 20,100 yuan.

If you have a one-click recovery in this book, you can recover it yourself according to the manual.

Remember to back up the data on the C drive before restoring.

It's good to find someone who can install the system and reinstall one. Or you can reinstall it for free at the place where you bought a computer!

Look bad **, generally two or three hundred.

Pretend it yourself, find a tutorial, it's a very simple answer.

Press the F8 button when you boot up, and then let go until the advanced options appear, and then select the correct configuration of the last time, press Enter to repair, or press F8 to enter the safe mode when you boot up, and use the system's built-in system to restore and restore to the time when there is no fault to repair it.

Dear users, hello!

Service outlets inquiry:

Go directly to the future, let the customer service redo it, it's free!

Is there a "one-click restore" next to the boot button?