What should I do if the laptop can t enter the system when it is turned on, and the laptop can t ent

When the boot can not enter the system, many friends think that it is a hardware failure, and some friends know a little bit about it, and replace and disassemble various parts of the computer indiscriminately, these are a misunderstanding, some friends get the computer repair shop, because they don't know the reason for being overcharged, these are the reasons why there is no laptop. Step to read.

In order to further the boot system problem of the laptop with you, I will tell you the specific precautions, generally the laptop works for more than three hours at least fifteen minutes or so, so that the hardware can be recovered, which has great benefits for the machine itself, and can also avoid many problems. Step to read.

If you encounter a boot can not enter the system, you can first enter the safe mode of the computer, for anti-virus, this kind of anti-virus is best to use some more advanced anti-virus software, do not use those free anti-virus software, after the anti-virus is generally solved quickly. Step to read.

If this method does not work, you can use the coder to write the BIOS update file into the BIOS, which can solve your problem. Step to read.

Reinstalling the system is also a solution to the problem of not being able to enter the system at boot, because system file corruption is a common occurrence, at this time, we can reinstall the system can not only repair the fault of the laptop itself, but also make the laptop completely clean up the system, it is still worth trying.

It may be that the system files are corrupted and you can try to reinstall the system.

The solution to the laptop boot and can't enter the system is as follows:

1. Press the boot button to start the computer, by default it will enter the interface of system selection, press the tab key, switch to the bottom to change the default value or select other options, and click the enter key.

2. Then select Select Other Options and press Enter.

3. Select Troubleshooter and press Enter.

4. Select Advanced Options and press Enter.

5. Select Startup Settings and press Enter.

6. Enter the startup settings interface, press Enter to confirm and restart the computer.

7. Enter the boot setting interface and press F4 to enter the safe mode.

8. After entering the "Safe Mode" desktop, press the "Win+R" shortcut key.

9. Open the "Run" window, enter "msconfig" and click "OK".

10. Open the system configuration window, check "Diagnostic startup", click "OK", and restart the computer to fix the problem that win10 cannot enter the system.

1. Press F8 to move to the advanced option when you start the machine and let go, select "The latest is the early state configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system.

2. If it is caused by hardware problems, it is recommended to plug and unplug the graphics card and memory (restore the BIOS factory default) by discharging the BIOS battery, clean up the hygiene, and polish the gold finger of the graphics card and memory.

Use the system that comes with the system restore method:

Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see the date page has a dark date, that is the restore point, after you select, click Next to restore.

1. Reason: System failure Shichun.

2. Solution:

1) Turn off the computer and turn it back on at the same time, press and hold the F8 key on the keyboard to enter the advanced boot options, after entering the advanced boot options, from your advanced boot options, choose to perform the last old grinding system restore, and try to restore the current system. Generally, this kind of system recovery is suitable for newly purchased notebooks, including those pre-installed with recovery partitions.

2) Reinstall the system. Find another computer, then use your USB flash drive to make a boot disk, and then prepare for a system image from the Internet, and you can install the system when you are ready.

Steps: 1. Try to enter safe mode for debugging.

1. Press the power button to turn off when you turn on and enter the system, and repeat about 3 times;

2. Click on the "Troubleshoot" option, then click on "Advanced Options", click on "Restart" under "Startup Settings", and select "Safe Mode" after restarting.

3. In safe mode, you can uninstall the previously installed software and check and kill viruses in a comprehensive way;

4. After entering the safe mode, if you have installed anything before the black screen, you can uninstall and delete the software in the safe mode, if you are not sure, you can do a clean boot, and the operation steps of the clean boot are as follows:

1) Press "Win+R" to open the "Run" window, enter the msconfig command and press enter, the system configuration dialog box will pop up.

2) Switch to the "General" tab, click "Selective Startup", and then click Clear the tick above "Load Startup Items".

3) Switch to the Services tab, click Hide All Microsoft Services, and then click Disable All.

4) Switch to the "Startup" tab, tap "Open Task Manager", tap Startup Items, and click Disable.

5) After clicking OK to save, reboot the system.

Second, in order to fully rule out the possibility of software or system problems, you can back up the hard drive data and reinstall the operating system in safe mode;

1. Press the power button to turn off when you turn on and enter the system, and repeat about 3 times;

2. Click on the "Troubleshoot" option, then click on "Advanced Options", click on "Restart" under "Startup Settings", and select "Safe Mode" after restarting.

3. Troubleshoot - Initialize the computer.

Third, the software debugging is invalid, and it is recommended to go to the after-sales service to test the hardware.

After we use the computer for a while, we will find that the computer turns on for a longer time. In fact, this is also a very normal phenomenon. There are many factors that can cause your computer to take longer to boot up.

As long as we pay a little attention to the following aspects. Basically, the boot time of our computer is not very slow, but it is impossible to return to the speed that it was when we first started using it. However, going back to the normal speed will do the trick.

Method steps.

1 5 Step by Step Reading.

Too much junk on your computer's system, or a useless registry can cause your computer to boot up slower. Therefore, it is best to clean up the computer system junk and some registration information from time to time.

The computer has too much software installed, and these software are set to boot with boot. This can easily lead to longer boot times. We can turn off these boot startup items.

After the computer has been used for a long time, there is dust in the internal chassis of the computer. At this time, we can go to the repair shop and ask a professional maintenance personnel to open the chassis for dust cleaning.

If it is a slow boot caused by the backward hardware configuration of the computer. We can update the hardware of the computer, such as changing to a newer hard drive, changing to a larger memory module, etc.

Summary. Dear, press the power button to start the computer, by default it will enter the system selection interface, press the tab key, switch to the bottom Change the default value or select another option, click the enter key.

Dear, press the power button to start the computer, by default it will enter the system selection interface, press the tab key, switch to the bottom Change the default value or select another option, click the enter key.

Then select Select a different option, Enter.

Select Troubleshooter and press Enter.

Select Advanced Options, press Enter.

Select Startup Settings and press Enter.

6. Enter the startup settings interface, press Enter to confirm and restart the computer.

Enter the boot settings interface and press F4 to enter safe mode.

8. After entering the "Safe Mode" desktop, press the "Win+R" shortcut key.

9. Open the "Run" window, enter "msconfig" and click "OK".

10. Open the system configuration window, check "Diagnostic startup", click "OK", and restart the computer to fix the problem that win10 cannot enter the system.