Sometimes there is a blue screen, and sometimes there is a C5 warning that the computer and hard dis

The machine was bought less than half a year, that is, the machine is still within the warranty period, and it is best to find a store warranty, because the notebook is not like a desktop, you can think about it casually, and the hardware equipment of the notebook is more sensitive.

Electric Brain Drive C5 Warning, the repair method is as follows:

1. Mount the hard disk to the current computer, turn on the power, enter the operating system, open the "HDTune software", and check whether there are any bad sectors, that is, the software detection interface appears yellow and red Xiaohui stove dots, and a C5 warning appears.

2. Enter "PE System" and launch "DiskGen" software.

3. Go to "Partition" and click "Adjust Partition Size".

4. Fill in the memorized sector number in the dialog box first. Once you've filled it out, click "Start". There are no c5 warnings after the fix.

Generally, it is a system problem, and there may be a memory that is broken, these two problems are considered first, you can do a system first, if the system is still blue screen during operation, it is recommended to replace the memory.

Scan the hard drive with MHDD to see if there are any bad sectors. There are two other possibilities, which are systems and data cables. Try them all.

Hardware, the hard disk has bad sectors, change the hard disk or use a detection tool to repair or shield the bad sectors.

You may wish to perform a comprehensive test on the C drive (you need to restart the computer to operate it automatically):

Right-click on the C drive icon General [Disk Cleanup] to clean up all junk (repair system files if prompted).

C Drive Properties Tool Error Check (Be sure to check the two options of error correction and bad sectors) [Start Check] Agree to restart the scan.

C Drive Properties Tools Defragmentation [Start Decluttering] Select C Drive [Defragmentation] (do not open other programs).

There are many reasons that cause a blue screen, what**? Can you tell me what software was launched with the blue screen?

Hover over your account, go out of the menu later, and then click the hi icon on the right to see the relevant information.

The computer has been used for a long time, there is a problem with the DMA on the motherboard, and it has nothing to do with your hard disk, you try to flash the motherboard BIOS chip to try.

C4 C5 is yellow, it means that there is a bad sector, and you will know how many red blocks you have with mhdd sweeping.

This is a problem with the disks, please fix it (fix it for each disk or just fix c).

Built-in disk repair method:

The specific steps are as follows: select the drive letter c in my computer, right-click the right mouse to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair it at boot after automatic shutdown, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

Yes, the hard drive has bad sectors, please replace it in time.

Probably not, this prompt I encountered, at that time I asked a classmate to help me reinstall the system, after reinstalling the system, it will be fine, you try.

It is possible that if this is still the case after the new security system, it is a bad sector of the hard disk.

Quite possibly, use the appropriate disk detection tool.

Tell you why, according to your current fault description, the problem is as follows, please take a good look if you write down the blue screen **, it is generally the incomplete reading of the information on the hard disk that causes the system to crash and the blue screen of death. You said it yourself, the hard disk has no bad sectors, and the system has been reinstalled. Therefore, it is first judged to be a problem with the data cable of the hard disk, followed by a problem with the circuit of the hard disk and the motherboard.

As a rule of thumb, it is usually the data line that has the most problems.

Solution 1: You go to the computer city to buy a new hard disk data cable, and when you come back, you can replug it in with a different interface. Problem solving.

Solution 2: Look at the hard disk and motherboard socket to see if the soldering is loose, if so, please solder well.

Solution 3: If the electronic components of the hard disk and motherboard fail, you can change the hard disk by yourself and test it in turn to see if the motherboard is broken or the hard disk is broken, and then replace it.

It's best to see if the following is a virus in the computer, or there is too much power gray, remember that it is the host power supply, the power supply is too gray, and the capacitor will be bulging out Therefore, the motherboard may be burned out, and there is a virus in the computer, but in comparison, it is better to say that there is a virus in the computer

Driver: See? The third line, what driver did you install, and then it was a blue screen, right?