The palm machine cannot be synced!! Urgent! 10

There can be many scenarios for this kind of problem:

1. There is a problem with the mobile phone data cable. Or there is a problem with the phone interface. This issue needs to be repaired. But the probability of this situation is small, if there is a problem with the mobile phone interface, it will be troublesome, and if there is a problem with the data cable, you can also buy a new one.

2. There is a problem with the computer software or system, although the hotsync icon appears in the lower right corner, but it cannot be synchronized. Solution: Uninstall Palm Desktop, reinstall it and try to synchronize again. Try a different computer.

3. This problem is caused by software conflicts on mobile phones. Solution: Back up the important things on the phone, such as written materials, contacts, diaries, text messages, etc., to the card, hard pick up the phone, restore to the factory state, and then re-synchronize and install the software.

Generally in the above three cases.

Is it completely unaware of the machine or is it crashing during synchronization?

The two ultimate methods are to uninstall the desktop and then reinstall it and sync it again, the software prompts a mobile phone to register and wants to register it, allow him, and then this is good, so that the data is not lost and is very fast.

I think it may be the synchronization name that doesn't match, right, carefully check your synchronization name, haha.

Why sync? Why why?

1.Enable the desktop sync software, right-click, and check if the first option (Local) is selected

2.If conditions permit, scrub the bottom connector of the phone and the metal connector part of the synchronization cable with free dipped in alcohol.

3.Try syncing.

4.In case of failure, slight shaking of the sync cable and the machine interface part.

Scrape the joint of 680 with a sharp object (toothpick. Or brush it with a brush.

Try again. When trying, you can adjust the connector of the synchronization cable appropriately. Generally, the lack of synchronization is the reason for contact, not other major problems, don't worry.

Install Palm Desktop

Run hotsync manager on your computer

Connect the Palm to the computer and run HotSync on the Palm

The connection method is cradle....Base cable) click on that icon, and the synchronization will begin.

Palm's synchronization software is Palm Desktop, which includes hotsyncFirst you need to have a Palm data cable, which is different from other models.

Then install the Palm Desktop (there is a Chinese version) on the computer to connect the Palm with the computer.

If there is a sync button on the data cable, you can sync it with a single click.

If not, go to the hotsync program and click on the big icon inside.

You can synchronize by installing the activesync software on your computer.

1. Yes, yes. However, be sure to install a desktop software like Palmdesk, so that you can**. I use PLAM Desktop myself, and it's very good.

2. Cardexport can read your card through the computer, but you also need to do a good job of desktop synchronization beforehand.

The default Palm Desktop software is to compare the time of the same file on both sides, and the new one overwrites the old one. That is to say, if a file on the palm is constantly updated, such as a diary file or notepad file, use the palm to overwrite the computer. So in general, it is the files on the phone that overwrite the computer files.

Unless the file on the computer is not available on the phone, the file from the computer will be copied to the phone.

However, it should be noted that some software, such as the Adarian Money software, has its own desktop software, which may overwrite the old files on the computer with the new files on the phone. In this case, you need to set the update method in the desktop software.

At present, the only way to synchronize is to install, connect the mobile phone to the computer, and the future operation will be similar to other synchronization software.

Card Reader is equivalent to a card reader, using your 650 as a USB flash drive.

There are two commonly used methods for software installation of 650: 1. Use the synchronization software mentioned above to install, which is slightly troublesome and is not recommended. 2. Directly transfer the installation file of 650 (*.).

PRC file) to memory, and you can run it directly using a program management software such as zlauncher.

I hope the above can be helpful to you, if you have any questions, you can leave me a message, and we will communicate together! The Palm650 is definitely a classic phone worth having! Especially suitable for those who play withering machines!

You need to set a name in the Tungsten e-machine first, and now you will set the same name in Palm Desktop.

The Palm Tungsten E is an older machine.

You find an old desktop software and install it.

The version is 680 and may not be universal.

Which channel are you syncing with? Outlook is recommended.

There are many possible reasons, it may be that you have changed some key db attributes, or it may be various problems on your computer, such as software environment, firewall, active defense, etc

The direct way is to reinstall the palmdesktop on the computer, if the problem is still there, please start the synchronization to see if it is normal.

I have tried all of them, and found that the hard boot is available, please restore the conectionmgrdb after the hard boot

Throw the phone away and buy another one.

palm680 is very good, I bought 2 of them.