What are the construction methods of epoxy paint?

1. Pre-construction inspection.

Concrete ground or mortar ground construction is completed for more than 28 days, and the self-leveling ground can only be constructed when the ground content is below 8 when the "mortar moisture meter" is measured. 2. Grassroots treatment.

Floating sand, floating dust, grease, and foreign objects on the ground are polished and removed by sandblasting machines and grinders, and cleaned with vacuum cleaners. 3. Grassroots repair.

The protruding parts of the ground should be polished and smoothed, and the depressions and cracks should be repaired and smoothed with epoxy putty. In order to ensure that the putty fully penetrates into the substrate, the base layer can be painted only after 12 hours after the base layer repair is completed. 4. Paint the bottom layer.

The primer is fully mixed with an electric mixer according to the applicable material instructions, evenly applied to the surface of the base layer with a special spatula, and the place with strong penetration needs to be painted again, and the next process construction is carried out after 12 hours.

Before the middle coating, the bottom layer should be reviewed, and the uneven parts and cracks on the ground should be leveled and repaired, and then the next process construction should be carried out. 5. The middle layer is painted.

The middle layer of paint is fully stirred according to the specified ratio, evenly coated on the surface of the primer with a special spatula, and the next process is applied after 12 hours.

6. Artesian plane layer.

The top layer is fully stirred according to the specified ratio and evenly spread on the surface of the middle layer. Then, a special defoaming drum is used to evenly roll the coating to control the construction thickness of the artesian plane layer. At the same time, the debris in the self-leveling material is removed.

The construction methods of epoxy paint are: air spraying, airless spraying, brush coating and roller coating. Different epoxy products adopt different construction methods; For example, epoxy zinc-rich primers are recommended to be sprayed.

Answer**Wante Coatings.

The construction process of epoxy paint is as follows:

1. Base surface cleaning striker: when grinding the coarse base surface with a motorized grinder, at the same time, use a manual grinder to clean the base surface of the limb stool to remove the base surface that needs to be thoroughly cleaned;

2. Check whether there are cracks and empty shells in the substrate;

3. Epoxy resin primer coating;

4. After the primer is cured, the epoxy resin is coated with quartz sand and trowel to scrape the epoxy quartz mortar many times to increase the thickness of the entire paint film and strengthen the physical properties of the paint film, such as compression resistance and impact resistance;

5. Epoxy resin soil coating;

6. Epoxy resin surface coating;

7. On-site cleaning and maintenance, floor maintenance, after the surface is painted, the relevant construction materials and tools will be removed from the site, and the finish will be completed with strict closure and protection for 48 hours.

Summary. Hello dear, glad to answer for you! The method of epoxy wall paint construction is 1. Clean the surface of the coating to ensure that there are no impurities and dust, and it is dry.

2. After stirring the epoxy resin paint in the mixing barrel evenly, add the curing agent according to a certain ratio, and then dilute it with the primer thinner until it reaches the viscosity required for construction, and then start the construction after filtration. 3. Spray epoxy resin paint twice, and wait for the first time to dry before spraying the second time. 4. After construction, wait for it to dry naturally, and make sure that the coating is completely dry before it can be put into use.

Hello dear, glad to answer for you! The method of epoxy wall paint construction is 1. Clean the surface of the coating to ensure that there are no impurities and dust, and it is dry. 2. The epoxy resin paint in the mixing barrel, after stirring evenly, add the curing agent according to a certain ratio, and then use the primer thinner to dilute until it reaches the viscosity required by the application of the dry work, and the construction can be started after filtration.

3. Spray epoxy resin paint twice, and wait for the first time to dry before spraying the second time. Crack 4, after construction, wait for its natural drying, and make sure that the coating is completely dry, before it can be used. Dear, thank you for your trust, the above is my reply, I hope it can help you, I wish you good health and a happy life.

Inside the plant, how to construct epoxy on the wall and roof?

Do you want to scrape putty?

First of all, the first step is to deal with the grassroots level. The second step of Yushi is to apply the primer for Keisan. The third step is to apply the middle coat. Step 4 is sanding. Step 5 is to scrape the putty layer. Step 6 is the topcoat.

Scrape putty.

Can the primer be wall-solidified?

No, the primer can be done without wall fixing, dear.

With what? The primer is coated with gaza powder,

The ingredients are dosed according to the weight ratio on the bucket.

1. Epoxy phenolic resin paint is a high-performance, high-crosslinking, two-component epoxy phenolic tank paint, with outstanding heat resistance and solvent resistance.

2. Huansun Qingoxy phenolic resin paint is suitable as the lining of the inner wall of the storage and processing vessels of petrochemical plants, and is used to resist acidic ** at temperatures up to 95 (203°F) and water from gas separators. Good resistance to aromatic and lipid resistant solvents.

1. When using epoxy primer, it must be mixed in accordance with the specified proportion, and some diluent diluent should be added in the middle, not too much, about 25% is OK.

2. When stirring the epoxy primer, try to choose an electric drill and stirring rod to speed up the stirring, because the epoxy machine is not completely used within 8 hours after the deployment, and it will be cured at the end, and there is no way to use it again after curing.

3. In order to reduce costs, intermediate paint can be used in epoxy primer, which can not only improve its anti-corrosiveness, but also improve the texture of the metal surface, and most importantly, it can reduce the overall cost.

How to apply epoxy resin paint?

Reference for two-component epoxy paint construction.

1. The surface of the coated object should be dry, free of impurities such as oil, dust and dirt, and applied to the surface of the electrophoretic paint or sanded primer.

2. Before use, the paint in the barrel must be stirred evenly, and the curing agent must be mixed according to the ratio of primer and curing agent (weight ratio specified by the manufacturer), and then diluted to the construction viscosity with primer thinner (18 20s for coating-4), filtered with 80 mesh filter cloth, and then it can be constructed.

3. The construction is mainly spraying, and it can also be brushed. Generally, the construction is done twice, and the next construction can be carried out after the first surface is dry.

4. It can be dried naturally after construction, or it can be forced to dry at 60, 45min or 70 80, 30min.

5. Water and alcohol solvents must be prevented from mixing into the paint or curing agent.

Product performance. Epoxy resin paint is especially suitable for use in humid, acid-alkali, solvent oil and other environments, and has a good anti-corrosion effect. Epoxy resin paint is not strong resistance to ultraviolet rays and is easy to chalify, so epoxy resin paint is not suitable for outdoor exposure environment.

Epoxy resin paint has excellent adhesion to the substrate, good interlayer adhesion to putty and various medium coats, excellent chemical resistance of the paint film, and good protection of the substrate.

Epoxy resin paint manufacturer** epoxy resin floor paint, epoxy resin middle paint, epoxy resin primer, epoxy resin topcoat, moisture resistant epoxy resin topcoat. Moisture and heat resistant epoxy paint, acid and alkali resistant epoxy resin topcoat, solvent resistant epoxy resin paint, corrosion resistant epoxy resin paint,