What are the epoxy floor paint construction equipment and construction tools? How to construct epoxy

1. Ground grinding: Use a grinder to polish and level the parts of the ground such as cement slag above the ground to remove the ground ash. Other treatment measures are used for loose and oily ground.

2. Primer: After the concrete substrate is processed and cleaned, the primer (roller coating or brushing) can be carried out, and the roller coating or brushing should be even.

Uniform, consistent thickness. The primer has a certain water vapor permeability, which can enhance the strength of the substrate and increase the adhesion of the coating to the substrate.

3. Intermediate coating: Quartz sand and quartz powder are added to the prepared water-based epoxy coating (intermediate coating) to form a water-based epoxy mortar, and it is evenly coated with a trowel to increase the thickness and compressive strength of the coating.

4. Batch supplement: After the middle coating, the floor is polished with sandpaper, and the putty composed of water-based epoxy paint (medium coating) and quartz powder is constructed according to the actual needs, and it is required to be smooth and no holes, and there is no batch of knife marks and sanding marks.

5. Putty batch supplement: the use of primal coating materials is deployed according to the proportioning method of primal coating materials, and the surface can be directly coated in polishing without adding water.

layer is scraped onto the layer. If necessary, you can appropriately add finer quartz powder or heavy calcium powder to make up, and polish it as a whole with fine sand disc paper after the batch is finished, and the reference amount of the material is supplemented.

6. Topcoating: Applying the water-based epoxy floor coating to the surface coating, the surface coating roller coating is applied twice, and the overall ground gloss is required to be soft, clean and uniform after completion.

1. No empty drums.

7. Maintenance: It takes 24 hours for the surface layer to be dry, and it should be closed during this period, so as not to affect the clean and smooth effect of the surface. 3D can be uploaded.

people, 7 days after the completion of maintenance can be officially put into use (25 shall prevail, low temperature needs to be moderately extended).

With the progress of society, various industries in our lives are also constantly striving for excellence to produce better materials for our healthy life. All decoration materials have to choose more environmentally friendly products, and some people don't know much about themHow to apply epoxy floor paintWork better? Let's talk about how we need to build better.

This will help us to make our renovation work work faster.

First, how to build epoxy floor paint better.

1. We need to know the selection of materials and characteristics in order to better construct: closed primer and solvent-free epoxy self-flowing plane coating, etc., solvent-free type is better, and the permeability and sealing are good; This solvent-free epoxy surface coating is usually composed of epoxy resin, hardener, color and additives, etc., with no or little filler.

2. Because our products need to be reformed, the construction method we often use to make thin self-elevating on uneven ground needs to repair the ground and level the ground first, otherwise the flatness is not good after construction; Secondly, the sealing primer must be able to ensure that the pores of the substrate are completely closed; The third is that the nail roller must be used.

3. Our production process is mainly used by foreign-funded floor coating enterprises to dismantle the sophisticated production process, with less construction procedures and a short construction period, which is recognized by everyone. The quality is relatively easy to control, but the material cost is high (the amount of main surface coating is large), and it is especially suitable for substrate floors with high flatness.

2. Epoxy paint construction tools.

1. Our advance preparation tools are used to coat self-leveling floor coatings, and the second step is to roll with nails to release the air in the film.

2. Professional masters say flat bottom scraper: used to scrape primer, putty and other thick floor coatings, our products are suitable for scraping close to the ground. Rollers & Paint Brushes:

Rollers and brushes with excellent quality and no lint will look good, and usually short-haired rollers have better operability.

3. Remember to use an airless spraying machine: the speed of spraying construction floor topcoat will be relatively fast. Compared with the good decorative effect, it is easy to control the consumption of paint; Spray pumps and nozzles must be selected according to the viscosity of the paint and the life of the paint to obtain the appropriate fluid pressure and flow rate.

High-pressure airless sprayers, which are usually driven by electric or internal combustion engines, are widely used due to their good portability.

All products are constantly being reformed because they cater to our needs. Construction is also a very important issue, so in the above article talked about how to construct epoxy floor paint. I hope it can help everyone to progress the construction faster.

1. Different industries have different requirements for the performance of workshop floor coatings, which involves differences in construction methods. When water-based epoxy coatings are used for machinery, chemical industry, warehouse and other workshop floors, due to the need for floor impact resistance, rolling resistance, wear resistance, corrosion resistance, etc., it must be constructed according to the conventional process, that is, the base layer of the primer epoxy mortar reinforcing layer putty topcoat.

2. Base treatment: For concrete floors with more oil stains, they can be washed with 10% 15% hydrochloric acid solution, and then rinsed with clean water; For the general concrete floor with a large area, it can be smoothed with an electric grinder and treated by removing traces of sand, dust and oil stains.

3. Back cover: After mixing the epoxy primer A and B components evenly, roller coating on the surface of the base layer, preferably roller coating 2 times, so that it can be fully wetted and penetrated into the concrete to play a role in bonding and strengthening.

4. Middle layer mortar: add an appropriate amount of mixed quartz sand with different particle sizes to the water-based epoxy coating and stir evenly, and use the plastering method to make the coating reach a certain thickness to enhance the impact resistance and rolling resistance of the floor.

5. Putty: After the epoxy mortar layer is fully cured, scrape two water-based epoxy putty, polish and smooth after drying, and provide a flat and round and firm base surface for the surface coating.

6. Epoxy floor paint topcoat: Mix the water-based epoxy topcoat evenly according to the mass ratio of component A and component B = 1 1, brush or spray on the base surface, make it self-leveling, and become a smooth, smooth and multi-functional floor coating with anti-static, corrosion resistance, antibacterial sterilization, and odor removal after curing.

7. When water-based epoxy coatings are used in food, medicine, electrical appliances and other workshops or public venues and living room floors, they can be constructed according to the base layer treatment primer putty topcoat process. The construction method of each process is the same as above. Ambient temperature required during construction" 12 and < 40; 15 40 is appropriate; The relative humidity in the air should be <85%, preferably 65%, otherwise, the coating will not cure well, which will affect the comprehensive performance of the coating.

Today, we recommend for you to give examples of floor epoxy paint and ordinary ground decoration materials, including some ceramic tiles or wood floors, relatively speaking, the cost performance is more good, and has the characteristics of anti-corrosion and reliable, especially suitable for use in some factories or laboratories that are more demanding in terms of experimental requirements, but the later effect of floor epoxy paint also depends on the details of the early construction operation and the recommendation and purchase comparison. Today's explanation for you is about the construction process of floor epoxy paint and the common distribution range, interested friends can comprehensively understand in case of emergency.

First, the floor epoxy paint construction technology

1. Use a grinder for comprehensive grinding. Let the damaged, sandy, viscosity, cracking, and hollow parts be completely exposed; And polish the floating mortar, old epoxy cement agglomeration, etc.

2. The ground with looseness, cracks or delamination must be thoroughly polished to a dense base layer to ensure the cohesion of the ground.

3. Clean up the floating ash, pollutants and other garbage on the surface of the base to ensure the cleanliness of the surface of the base layer.

4. Clean the ground that has been disposed of.

Special treatment of expansion joints, cracks, hollow floors, loose old epoxy.

1. After cutting the cracked parts into V-shaped grooves with cutting blades, they are repaired and filled with high-powered medium coated mortar; Small cracks can be repaired with epoxy resin and Extender T thickener; After it is completely cured, it is finely beaten with a hand mill until it is flat.

2. Chisel out the parts of the hollow drum and the loose old epoxy, if the depression is deep, use high-power medium coating mortar to make up for it, and then use a hand mill to beat it to a smooth level after it is completely cured.

3. After all special sites are repaired, clean them again.

Inspection method: a. The treatment of the above parts is an important part of the service life of the entire floor, otherwise it will lead to cracking of the floor.

b. After treatment, it is level with the whole ground, and the repair place is non-separate, dense, hard and flat.

Second, how much is the floor epoxy paint**?

Epoxy floor construction is not equal, mainly according to the construction of the paint brand, thickness, construction technology degree and the degree of treatment of the ground base, etc., epoxy floor construction is generally between 30-300, each place is not the same, but it is recommended that the dust Zi family recruit a regular construction company, so that there will be some protection.

The above is an example of the method of floor epoxy paint operation, as well as the common analysis, from which we can know that in the process of construction, the first thing should be polished, some loose or cracked ground should be treated to ensure the cohesion of the ground, its Xun brother Changci should be thoroughly cleaned as much as possible, and should also be inspected in time to ensure that the surface of the floor is smooth and dry. In addition, some common tools and materials are also more critical, only the comprehensive operation will achieve the later satisfactory effect, in order to maximize the value performance of floor epoxy paint.

You can get it for free

Floor epoxy paint is a high-performance coating, which has the advantages of wear resistance, corrosion resistance, anti-start-up and dust change, easy to clean, etc., and is widely used in the ground decoration of industrial plants, workshops, hospitals, schools, shopping malls and other places. The following is a detailed introduction to the construction operation method and ** of floor epoxy paint.

First, the floor epoxy paint construction operation method.

1.Foundation treatment: First of all, the ground should be cleaned, polished, repaired and other treatments to ensure that the ground is flat, dry, free of oil and loose matter.

2.Primer brushing: Paint the epoxy primer on the ground, which should be uniform and consistent in thickness, so as to avoid the phenomenon of leakage, dripping and blistering of agitated masses.

3.Intermediate coating: After the primer is dry, apply a layer of epoxy secondary coating, which should also be uniform and consistent in thickness.

4.Mortar brushing: Epoxy mortar is painted on the ground, the thickness is generally 3-5mm, pay attention to the uniformity and compactness of the mortar.

5.Topcoat brushing: After the mortar is dry, apply a layer of epoxy topcoat, which should also be uniform and consistent in thickness.

6.Curing: After the topcoat is dry, it is necessary to carry out curing, which generally takes 7-10 days, during which it is necessary to avoid heavy crushing, water immersion and other operations.

2. Floor epoxy paint**.

The ** of floor epoxy paint varies according to the brand, quality, thickness, area and other factors, generally speaking, **between 50-200 yuan square meters. Specifically**, it is also necessary to inquire according to the actual situation.

In short, the construction operation method of floor epoxy paint needs to be selected according to the actual situation, and the regular construction company and brand are selected to ensure the quality and effect of ground decoration.

We all know that epoxy floor paint is generally used in large workshops or large shopping malls and parking lots, etc., in fact, floor paint is also a more common decoration material in decoration, the reason why people like epoxy floor paint is because it is more environmentally friendly, and now people are more concerned about this aspect, thenThe construction process of epoxy floor paintWhat are they? What are the key points of the construction of epoxy floor paint? Let's introduce it to you.

First, the construction process of epoxy floor paint

1. Waterproof treatment: the foundation ground is polished flat and resistant to dust absorption, and impurities are removed; The ground on the first floor must be waterproofed; Plain land treatment: repair, polishing, and dust removal according to the condition of the plain land;

2. Epoxy primer: use a roller coating with strong sealing and adhesion to enhance surface adhesion; Apply primer according to the ground conditions, the amount of coating should be sufficient, and the usual amount used is;

3. Epoxy middle coating: add an appropriate amount of epoxy resin to quartz sand, and evenly coat it several times with a trowel; If the ground condition is not good, you can do mortar coating, solvent-free coating and quartz sand can be mixed, and the amount of use is about that;

4. Batch scraping and scraping. Adjust the flatness of the ground, use 100 200 mesh quartz sand and epoxy batch scraping material, as the first putty, to fully stir evenly and scrape flat, and then use 200-270 mesh quartz sand and epoxy batch scraping material as the second putty, this road is mainly used to enhance the wear resistance and flatness of the ground, and use the sandbag dust-free rolling sander to polish the draft and vacuum clean.

5. Finish the middle layer of the floor. On the surface of the putty after grinding and cleaning, the middle layer is coated with epoxy floor paint, which can be brushed, scraped, and sprayed without air under high pressure, and the spraying pressure is 20 25MPa.

Second, the construction points of epoxy floor paint

1. The ambient temperature of the construction site should be higher than 5, and the relative humidity should be less than 85% before construction. The builder should make practical records of the construction site, time, temperature, relative humidity, floor surface treatment, and data for repressing. After the coating is applied, the relevant equipment and things should be cleaned immediately.

2. Regarding the quality management regulations, the China Epoxy Resin Industry Association emphasized that before construction, the construction technicians should confirm the following items: the base area and the state of the base surface, the selection of materials and construction structure, and the familiarity with the material manual, ratio and dosage; After construction, the construction technician should confirm whether there are obvious defects such as smears, pores, particles, orange peel, etc., whether there is uneven color and other coating defects, whether the color is the same as the sample, whether there is any color difference, and whether the coating film is hardened according to normal rules (simple judgment with fingernails);

In large venues, we will see the figure of floor paint, because it is relatively easy to clean, so what are the construction techniques and construction points of epoxy floor paint, and you have also understood it through the introduction.