What documents do I need to apply for the CCC mark?

In this **"" note type pin code book login 3C logo issuance management system bucket cong, improve the information on the **, apply for the logo. After the application is approved, the institution will take the initiative to contact the remittance, and the remittance completion center will send the sign to the enterprise.

If you apply for CCC certification in the "CCC certification OEM" mode, all the work will be done by the foundry.

1. Submit an application of intent to the designated certification body, which shall include the following contents:

Manufacturer information (including the status of the quality system and the certification of the system, etc.);

Product name, model, specification, trademark, etc.;

In addition, it is also necessary to provide relevant information of the product, such as: product manual, maintenance manual, product drawing, working (electrical) schematic diagram, circuit diagram, component configuration diagram, product safety performance inspection report, list of safety key parts, etc. Customs declaration, inspection if the application for the product is an electrical product, the electromagnetic compatibility type test needs to be done, and the following technical information needs to be supplemented.

1) Electromagnetic compatibility technical standards;

2) Description of product changes that may affect safety performance;

3) Product electromagnetic compatibility performance test report (provided by model);

4) A list of all the key components of electromagnetic compatibility with EMC requirements.

2. In principle, the application should be made according to the model. Products of the same model produced by different production plants or products of the same model produced by the same production plant in different locations shall be applied for separately.

3. After the CCC certification body and the subcontracted laboratory review the application materials, divide the product unit, and reach an agreement with the applicant on the standards, test items and required sample quantities based on the test, the subcontracted laboratory shall report the product testing fee to the CCC.

4. The CCC certification body, together with the business representative, determines the number of audit days of the quality system of the manufacturer according to the quality system status of the manufacturer, and determines the corresponding system audit fee.

5. The CCC certification body will send the applicant a CCC product certification ** list. **The list includes the details of the certification fee, product name and model, testing standard and sample quantity, etc.

6. After the applicant signs and seals the ** list and returns, the CCC certification body issues a task notice to the business representative, entrusts the business representative to sign the certification contract with the applicant, and sends a formal application to the applicant. The application includes the information to be submitted, the responsibilities of the applicant and the "Quality System Questionnaire" to be attached.

7. When the following conditions are met, that is, the sample testing stage will be entered, and the CCC certification body will issue a task notice to the relevant subcontracted laboratory to notify the laboratory to prepare to receive samples for testing

1) After the applicant has filled in and signed and sealed as required, return the ** form, the official "application" and the product certification contract;

2) The applicant has submitted all the required application materials;

3) The applicant has sent the samples to the designated place in accordance with the list of samples sent for sales and training;

4) The applicant shall pay the relevant fees in the manner agreed in the contract.

When the applicant fails to meet the above requirements in time, resulting in time delay and increased certification cycle, the responsibility shall be borne by the applicant.

8. All materials submitted by the applicant should be written in Chinese, and foreign applicants can use English.

The application form contains information about the applicant, manufacturer, manufacturer and product. Each model of the product should be applied separately. Products from different manufacturers of the same model should also be applied separately.

Stage 1: Application acceptance.

Upon receipt of the application that meets the requirements, CQC will issue a notice of acceptance to the applicant, informing the applicant to send or send the relevant documents and materials. At the same time, CQC sends relevant charges and notices. Applicants should provide information to CQC as required.

After the applicant has paid, please fill in the payment voucher as required.

Phase 2: Documentation review.

In the data review stage, the product certification engineer needs to divide the application into units. After the unit is divided, if the sample test is required, the product certification engineer sends the sample delivery notice and the corresponding payment notice to the applicant, and at the same time, the applicant is notified to send the sample receipt notice to the corresponding testing institution.

Phase 3: Receipt of samples for sample delivery.

The samples are directly addressed by the applicant to the designated testing institution. After the applicant has paid, please fill in the payment voucher as required. The testing institution will accept the samples received and called, fill in the sample acceptance report, and issue a sample rectification notice for unqualified samples, and fill in the sample acceptance report after rectification.

After the sample is accepted, the testing institution fills in the sample testing schedule and reports the sample testing progress, and after confirming that the relevant fees of the applicant are paid, a formal acceptance notice is issued to the applicant, and the testing task is issued to the testing institution, and the sample testing officially begins.

Phase 4: Sample testing.

In the process of sample testing, the applicant shall rectify the non-conformities in accordance with the sample test rectification notice. After the sample test is completed, the testing institution fills in the sample test result notice. The testing agency will also transmit the test report and other information to CQC.

Stage 5: Factory Audit.

For applications that require a factory audit, the inspection department organizes a factory audit.

Stage 6: Conformity Assessment.

The product certification engineer collects and sorts out the results of each stage and conducts a preliminary evaluation. The conformity assessor will re-evaluate the above results.

Phase 7: Certificate Approval.

The Director issues the certificate.

Phase 8: Printing, collection, delivery and management of certificates.

The applicant prints out the voucher and picks it up or asks for the certificate to be sent.

Process: Application for certification + type test + preliminary factory inspection + evaluation and approval of certification results + supervision after certification, this is the process, you can consult me for details.

There are about 8 stages in the application process: Phase 1: Application Acceptance, Phase 2:

Data review, Phase 3: Sample Receipt for sample delivery, Phase 4: Sample testing, Phase 5:

Factory Audit, Phase 6: Conformity Assessment, Phase 7: Certificate Approval, Phase 8:

Printing, collection, delivery and management of certificates. Certification period: 3 months.

You can also log on to the expert column of China Certification and Accreditation Information Network to consult experts in related fields to learn more about the certification process.

List of CCC certification materials.

1. Documents and materials to be provided when applying for the first time or changing relevant information, and application for compulsory product certification;

A copy of the applicant's Business License of Enterprise Legal Person or registration certificate (provided at the time of initial application or change);

Organizational chart of the production plant (provided at the time of initial application or change);

Process flow diagram of the product applying for certification (provided at the time of initial application or change);

List of key instruments and equipment for routine inspection (see certification implementation rules, factory quality control testing requirements) (provided at the time of initial application or change);

Product diagram, electrical schematic diagram;

Chinese nameplate and warning mark of the product applying for certification (in duplicate);

Chinese instruction manual for applying for certification products;

A description of the differences between the various models of products in the same application unit;

Appearance of each model product in the same application unit** (in duplicate);

Other relevant information as required (if you have a CB test report).

2. Documents to be provided when applying for similar products again.

1. Application for compulsory product certification;

2. Product diagram, electrical schematic diagram;

3. Chinese nameplate and warning mark of the product applying for certification (in duplicate);

4 Chinese instruction manual for applying for certification products;

5. Description of the differences between various models of products in the same application unit;

6. Appearance of each model product in the same application unit** (in duplicate);

7. Other relevant information as required (if there is a CB test report, please provide).

3C compulsory certification product testing provides a list of documents.

The following information should be provided when the product is tested and sampling:

Sample Submission Registration Form;

CCC application details;

Product Manual;

Product specifications;

Product Repair Manuals;

Product circuit diagram (including schematic diagram and printed brush circuit layout);

Description of the difference between the main delivery model product and the covered model product in the same application unit;

A list of key components related to the safety of the product and a list of major components that have an impact on electromagnetic compatibility performance;

A copy of the certification certificate of the key safety element of the product;

CB test certificate and report of the product (if any);

Authorization to use the trademark of the product (if any).

If you entrust us to apply, you must first provide a copy of the business license, the organization ** certificate, the trademark registration certificate (if any), the model and specification of the product, etc.

The second is the sample delivery stage, which requires a copy of the business license, organization certificate, trademark registration certificate (if any), application, factory inspection questionnaire and product manual, circuit diagram, etc.

Different products need different information when doing 3C certification.

Approximate process: apply for ---sample delivery--- testing--- factory inspection (some products also need to be sampled --- tested on site) - certificate.

Information at the time of the general application: license, ** certificate, product description, necessary**, etc., must have a production site, can produce products normally, and have the necessary testing instruments (different types of products have different requirements for testing instruments).

1 Completed Power of Attorney.

2. A copy of the business license and a copy of the organizational structure 3 Production process flow chart or service flow chart.

4 Organizational chart.

5 List of applicable laws and regulations.

6. Product test report.

7 QS certificate or health license.

8 Geographical Location Diagram.

9. Floor plan of the factory.

10 Production workshop plan.

11 List of major production and testing equipment.

12 Detailed Product Description.

CCC certification information can be found very clearly on the official website of China Quality Certification Center, and it is very clear what information to prepare, charge and test.

Divided into early, middle and late stages, I am doing ** certification, you can consult me,