-
The network card driver is not installed, and you disable the network card, you can right-click on the network neighbor-properties, and then see that the local connection can't If it can't, the network card is faulty, if it's grayed out, double-click to enable it.
According to your situation, it should be that you don't have a network card driver.
-
Despise the 1st floor, how can 769 have a wrong password?? It's a network card problem. First, see if there is a local connection to the online neighbor property, and if so, see if it is disabled, if it is not uninstalled and reinstalled.
-
You look at your local connection, and if it's disabled, start it. For details, you can go to Baidu and write your question and search for the answer.
-
Call telecom customer service to consult, it may be that the password is entered incorrectly.
For details, see Details.
-
If "Error 769" is displayed for broadband Internet access, it is usually caused by the network card being disabled or the network card driver is damaged
1. Disable and re-enable local connections;
2. Reinstall the NIC driver;
3. If the network card is not integrated, clean up the network card and replace a slot;
Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.
-
The most direct way is to call ** to give you a customer service warranty for opening broadband.
They'll take care of it for you.
I've tried it and it works.
-
The network card is broken, and it should be able to boot up when you take it down.
-
You click the right button on the computer, select Properties, then select Device Management, and then look at the network card driver, if it is an "x" means that the network card is disabled, click the right button to activate the network card to solve the problem.
-
Error 769 error, most of them are disabled on the network card, just enable it! If you don't find a local connection, it's usually because the driver of the network card is lost or the computer doesn't detect the network card, just reinstall it!
-
It's the network card that is disabled, check the network connection, double-click the small gray icon, and click on it.
-
If "Error 769" is displayed for broadband Internet access, it is usually caused by the network card being disabled or the network card driver is damaged
1. Disable and re-enable local connections;
2. Reinstall the NIC driver;
3. If the network card is not integrated, clean up the network card and replace a slot;
Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.
XDSL, optical broadband, and Cablemodem access solutions:1Turn off the Broadband Cat. >>>More
Error **629This means that you have been disconnected from the other computer. Please double-click on this connection and try again. >>>More
1. Has your computer been touched recently? In particular, have the ADSL modem wiring and lines been moved? Please check whether the signal light on the "cat" will flash (the cat is different, the indicator light is also different, mainly dsl, adsl, line, link, @等都是宽带信号指示灯), if you want to flash, check whether the line is connected to the pair (mainly on the separator, there are three ports, each port corresponds to a line, the connection method is the bus is the incoming line port, ** machine connected to the phone port, in addition to modem or adsl connected to the broadband cat, you can also directly connect the ** incoming line on the cat to try, This can rule out the bad separator), if the connection is still flashing, check whether the line has a joint, and the signal will not be stable if the line oxidation contact is not good (the crystal head or line of the line into the cat has a problem, which will also cause the line to be blocked. >>>More
Based on the information provided, if a broadband fault occurs, you can troubleshoot the problem by using the following methods: >>>More
678 is the network is not working, if there is no problem with other changes, then it is a problem with your desktop network card, it is recommended to plug and unplug the network card, and try again.