The main technical parameters of molecular sieve oxygen concentrator

1. Normal working conditions of the equipment.

Ambient temperature: 5 to 40

Power supply voltage: oxygen generator 220V 22V

Air compressor, oxygen compressor 380V 38V

Power frequency: 50Hz 1Hz

Power: 37kw

Relative humidity: 80%.

Atmospheric pressure: 86kpa 106kpa

Main machine size l w h (without air compressor): m m m.

2. Physical and chemical indexes of oxygen in products made by equipment.

Oxygen production. 20m3/h

Oxygen concentration: 90% (vv).

Moisture content:

Carbon dioxide content:

The carbon monoxide content should be in accordance with YY T0298

The content of gaseous acids and bases should be in accordance with YY T0298

The content of ozone and other gaseous oxides shall conform to YY T0298 solid matter particle size: 10 m

Solids content:

Ambient temperature: 5 40 Power supply voltage: oxygen generator 220V 22V

Air compressor, oxygen compressor 380V 38V power frequency: 50Hz 1Hz power: 37kw relative humidity:

80% atmospheric pressure: 86kpa 106kpa main machine size l w h (without air compressor): m m m.

Hello, I am glad to serve you and give you the following answers: the principle of the medical oxygen generator is to use the oxygen in the air, through the filtration of molecular sieves, to separate the oxygen in the air, and then compress the oxygen to a certain pressure through the compressor, and finally adjust the flow of oxygen through the regulator and output it to the patient's respiratory tract. The five-liter household mega oxygen machine needs 5 molecular sieves, each molecular sieve is 5 liters in size, each molecular sieve can filter out the oxygen in the air, separate the oxygen, and then compress it through the compressor to compress the oxygen to a certain pressure, and finally adjust the flow of oxygen through the regulator and output it to the patient's respiratory tract.

If there is a problem, it may be due to the poor filtration effect of the molecular sieve, or the compressor pressure is not enough, or the regulator does not regulate the oxygen flow accurately. The workaround is:1

Check whether the molecular sieve is damaged, and if there is damage, it should be replaced in time; 2.Check whether the compressor is damaged, if there is damage, it should be replaced in time; 3.Check whether the regulator is damaged, and if there is damage, it should be replaced in time; 4.

Check whether the oxygen flow rate is accurate, if not, it should be adjusted in time; 5.Check whether the pressure of oxygen is normal, if not, it should be adjusted in time. Personal Tips:

When using a medical oxygen concentrator, components such as molecular sieves, compressors, and regulators should be checked regularly to ensure the quality and flow of oxygen and ensure the safety of patients.

Hello, I am glad to serve you and give you the following answers: The principle of the medical oxygen generator is to use the oxygen in the air to separate the oxygen in the air through the filtration of molecular sieves, and then compress it through the compressor to compress the oxygen to a certain pressure, and then transport it to the patient's respiratory tract through the pipeline, so as to achieve the purpose of the patient. The five-liter household oxygen generator needs to use 5 molecular sieves, the function of these 5 molecular sieves is to separate the oxygen in the air, and then compress it through the compressor to compress the oxygen to a certain pressure, and then transport it to the patient's respiratory tract through the pipeline, so as to achieve the purpose of the patient.

When using a medical oxygen concentrator, if there is a problem, it may be due to the poor filtration effect of the molecular sieve, or the pressure of the compressor is not enough, or the connection of the pipeline is poor. The solution to the lease is as follows:1

Check the molecular sieve to ensure that the filtration effect of the molecular sieve is good; 2.Check the compressor to make sure the pressure of the compressor is sufficient; 3.Inspect the pipes to make sure they are well connected; 4.

Check the oxygen flow to make sure it is adequate. When using a medical oxygen concentrator, the following points should be noted: 1

The molecular sieve should be checked before use to ensure that the filtration effect of the molecular sieve is good; 2.Check the compressor before use to ensure that the pressure of the compressor is sufficient; 3.The pipeline should be inspected before use to ensure that the pipeline is well connected; 4.

Check the oxygen flow rate before use to ensure that the oxygen flow rate is sufficient; 5.During use, the molecular sieve, compressor, pipeline and oxygen flow should be checked regularly to ensure the normal operation of the equipment.

Hello, I am glad to serve you and give you the following answers: The principle of the medical oxygen generator is to use the oxygen in the air to separate the oxygen in the air through the filtration of molecular sieves, and then compress it through the compressor to compress the oxygen to a certain pressure, and then transport it to the patient's respiratory tract through the pipeline, so as to achieve the purpose of the patient. The five-liter household oxygen concentrator needs to use 5 molecular sieves, which can separate the oxygen in the air, and then compress it through a compressor to compress the oxygen to a certain pressure, and then transport it to the patient's respiratory tract through the pipeline, so as to achieve the purpose of ** patient.

If there is a problem with the use of medical oxygen concentrator, it may be caused by the poor filtration effect of the molecular sieve, or the pressure of the compressor is not enough, or the connection of the pipeline is poor. The solution is to first check the filtration effect of the molecular sieve, if it is not good, you can replace it with a new molecular sieve; Secondly, check the pressure of the compressor, if the pressure is not enough, you can adjust the pressure of the compressor; Finally, check the connection of the pipe, and if the connection is bad, you can reconnect the pipe. Steps to use a medical oxygen concentrator:

1.Check the filtration effect of the molecular sieve, if it is not good, you can replace it with a new molecular sieve; 2.Check the pressure of the compressor, if the pressure is not enough, you can adjust the pressure of the compressor; 3.

Check the connection of the pipe, if the connection is bad, you can reconnect the pipe; 4.Install the molecular sieve on the oxygen concentrator and connect the tubing to the patient's respiratory tract; 5.Turn on the oxygen concentrator, adjust to the appropriate oxygen concentration in the setting, and start**. Individual.

Hello, I am glad to serve you and give you the following answers: the principle of the medical oxygen concentrator is to use the oxygen in the air to separate the oxygen in the air through the filtration of molecular sieves, and then compress it through the compressor to compress the oxygen to a certain pressure, and finally adjust the flow of oxygen through the regulator and output it to the patient's respiratory tract. The five-liter household oxygen generator needs 5 molecular sieves, each molecular sieve has a stupid size of 5 liters, and the filtration accuracy of each molecular sieve is microns, which can effectively filter out impurities in the air and ensure the quality of oxygen.

The reason for the problem may be that the filtration accuracy of the molecular sieve is not enough, or the size of the molecular sieve is not enough, or the pressure of the compressor is not enough, or the adjustment of the regulator is not accurate, etc. Workaround:1

Check whether the filtration accuracy of the molecular sieve reaches microns, if it is not enough, you can replace it with a new molecular sieve; 2.Check whether the size of the molecular sieve reaches 5 liters, if it is not enough, you can replace it with a new molecular sieve; 3.Check whether the pressure of the compressor meets the requirements, if it is not enough, you can adjust the pressure of the compressor; 4.

Check if the adjustment of the regulator is accurate, if not, you can adjust the adjustment of the regulator. Personal Tips:1

When using a medical oxygen concentrator, the filtration accuracy and size of the molecular sieve should be checked regularly to ensure the quality of oxygen; 2.When using a medical oxygen concentrator, the pressure of the compressor should be checked regularly to ensure the pressure of oxygen; 3.When using a medical oxygen concentrator, the regulator should be checked regularly to ensure the flow of oxygen.

Hello, I am glad to serve you and give you the following answers: The principle of the medical oxygen concentrator is to use molecular sieve technology to separate the oxygen in the air, and then compress it to a certain pressure through the compressor, and then transport it to the place where the patient needs it through the pipeline. Five-liter household oxygen concentrators need to use a 5-liter molecular sieve, which is a filter composed of multiple layers of fine fibers, which can effectively separate the oxygen in the air, so as to achieve the goal of oxygen production.

If there is a problem, it may be due to the poor quality of the molecular sieve, or due to insufficient pressure in the compressor, or due to the blockage of the pipeline, etc. The workaround is:1

Check the quality of the molecular sieve, if the quality is not good, it should be replaced with a new molecular sieve; 2.Check the pressure of the compressor, if the pressure is not enough, the pressure of the compressor should be adjusted; 3.Check for blockages in the pipes, and if they are blocked, they should be cleaned to ensure that oxygen can pass through without a hitch.

Personal tip: When using an oxygen concentrator, you should regularly check the quality of the molecular sieve, make sure that the pressure of the compressor is sufficient, and clean the pipes regularly to ensure that the oxygen can pass through smoothly.

Hello, I am glad to serve you and give you the following answers: The principle of the medical oxygen generator is to use the oxygen in the air to separate the oxygen in the air through the filtration of molecular sieves, and then compress it to a certain pressure through the compressor, and finally transport it to the patient's respiratory tract through the pipeline, so as to achieve the purpose of the patient. The five-liter household oxygen concentrator needs to use 5 molecular sieves, each molecular sieve has a size of inches, and the filtration accuracy of each molecular sieve is microns, which can effectively filter out impurities in the air, so as to achieve the purpose of increasing oxygen concentration.

The reason for the problem may be that the accuracy of the molecular sieve is not enough, or the size of the molecular sieve is not enough, or the pressure of the compressor is not enough, or the connection of the pipe is not strong enough. Workaround:1

Check whether the filtration accuracy of the molecular sieve reaches microns, if it is not enough, you can replace it with a new molecular sieve; 2.Check whether the size of the molecular sieve reaches inches, if it is not enough, you can replace it with a new molecular sieve; 3.Check whether the pressure of the compressor meets the requirements, if it is not enough, you can adjust the pressure of the compressor; 4.

Check that the connection of the pipe is secure, and if it is not enough, you can reconnect the pipe. Teaching:1

Before using the medical oxygen concentrator, you should check whether the filtration accuracy of the molecular sieve and the curved inch of the ruler bucket meet the requirements to ensure the quality of oxygen; 2.Before using the medical oxygen concentrator, you should check whether the pressure of the compressor meets the requirements to ensure the pressure of oxygen; 3.Before using a medical oxygen concentrator, you should check whether the connection of the tubing is secure to ensure the flow of oxygen.

Summary. Hello; A medical oxygen concentrator is a medical device that uses pressurized air, water vapor and electrical energy to separate oxygen and nitrogen according to the principle of proton exchange membrane (PEM). Household oxygen concentrators require 180-mesh molecular sieves, which can guarantee the separation of high-purity oxygen.

Hello; A medical oxygen concentrator is a medical device that uses pressurized air, water vapor and electrical energy to separate oxygen and nitrogen according to the principle of proton exchange membrane (PEM). The 180-mesh molecular sieve is required for the household oxygen machine, which can separate high-purity oxygen from the mu certificate.

You've done a great job! Can you elaborate on that?

Yes pro; Principles of oxygen production with proton exchange membrane (PEM): 1Compress the air through the compressor to the required pressure; 2.

The air is cooled by the cooler to achieve the purpose of using moist heat energy to complete evaporation; 3.The air is purified through the filter to adsorb large impurities; 4.The air passes through the proton exchange membrane to separate the oxygen disturbance and nitrogen in the compressed air; 5.

It is sold through a regulator to regulate the gas flow rate to obtain the required pure oxygen.