How to take the elevator, how to take the elevator

Safe way to ride the elevator:

1. Before entering the elevator, don't rush in, observe whether the door is open normally, and be careful if there is a jam. Don't just try to get in.

2. Then observe whether the elevator has come to this floor, many people who have not observed just did not see clearly, stepped on the air, and saw the elevator stop steadily before entering.

3. When the elevator door is about to close, you should not use your hands or other objects to obstruct the normal program, which is likely to cause the elevator program to be abnormal.

4. Don't press the above buttons in the elevator, and don't press the switch back and forth, which will also have an impact on the elevator program.

5. It is best not to lean on the elevator door in the elevator, because once the danger appears, the door is the most dangerous area. It is best to stand on the side of the elevator.

6. If there is a handrail in the elevator, you should grasp the handrail, because if the elevator fails, there is something to hold on to avoid falling and hurting.

7. Don't overload the elevator or take too many people, the overloaded elevator will remind that too many people may cause the elevator to run under high load, or wait, don't crowd in the elevator.

8. Don't break the door with your hands when there is an accident.

9. When you get out of the elevator, you should wait for the elevator to stop before going down.

There are buttons at the elevator door up and down arrows, select the direction you want to go, when the elevator reaches the floor you are on, the door will automatically open, and when you go in you will see a button with numbers next to the door, which is the value of the floor. Press the button of the floor you want to go to, and the elevator will automatically go up and down to the floor you want and open the door automatically...

Press the elevator switch, after the elevator door opens, go in, press the number of the floor you have arrived at again, and wait until the elevator reaches that floor, you can go out.

Find the location of the elevator entrance first. The elevator entrance in the same city is near the staircase, and the elevator entrance of some large office buildings, hotels and shopping malls is on the lobby side. Then press the button on the side wall of the elevator entrance.

If you want to go upstairs press the up button, go downstairs press the down button. When you press the button, the button will light up, and you can wait for the elevator door to open. Finally, after entering the elevator, press the number button in the elevator, and press the number on the floor, and the number will light up after pressing the button.

After reaching the designated floor, the elevator door will automatically open, just walk out of the elevator door. <

1. Find the location of the elevator entrance first. The elevator entrance in the same city is near the staircase, and the elevator entrance of some large office buildings, hotels and shopping malls is on the lobby side.

2. Then press the button on the side wall of the elevator entrance. If you want to go upstairs press the up button, go downstairs press the down button. When you press the button, the button will light up, and you can wait for the elevator door to open. The display at the button allows you to observe how many floors the elevator has reached.

3. After finally entering the elevator, press the number button in the elevator, and press the number button on the floor, and the number will light up after pressing the button. The elevator doors will automatically close after entering the elevator for a certain period of time. If there is no one entering the elevator and the elevator door does not close automatically, you can press the close elevator door button to close the elevator manually.

After reaching the designated floor, the elevator door will automatically open, and the elevator door will be completed when you walk out of the elevator door.

How to take the elevator:

1. Elevators.

Press the arrow keys up and down the arrow keys down. Once inside, press the floor button you want to go to. The elevator has a car that runs between at least two columns of rigid guide rails that are vertical or have an inclination angle of less than 15°.

2. Escalators. Stand on the side of the escalator, do not walk or run at will, just hold the handrail firmly. A stationary electric drive device used to transport passengers at an upward or downward incline between different floors of a building.

Elevator Safety Matters:

1. The elevator can not be overloaded, when the elevator alarms, it should take the initiative to exit, wait for the next trip and then take it, the elevator overload is very dangerous.

2. When the elevator door is about to close, do not force the elevator to rush into the elevator, prevent the elevator from closing, and do not stay with one foot in the house, which will be harmed. When the elevator door is about to close, it is strictly forbidden to reach through the door gap to try to reopen the elevator. Keep your distance from the elevator doors, and take special care to prevent clothing or other personal belongings from getting caught in the elevator doors when opening and closing the doors.

3. When the elevator is operating normally, do not press the emergency button, otherwise it will bring you unnecessary trouble. If you need the elevator door to remain open, you should press and hold the door open button, and if you need to carry items, you can ask other passengers to help you press and hold the door open button. Fourth, when taking the elevator, if the elevator door is not closed and runs, it means that the elevator is faulty, and passengers should not take the child, and report to the maintenance personnel at the same time.

Summary. In the waiting hall, press the upward call button when going upstairs to the destination landing" "Press the call button when you need to go down" "The button light is on to indicate that the call has been registered (if the button has been pressed by another passenger, there is no need to press again), and the car is about to come to the landing to stop.

In the waiting hall, press the upward call button when going upstairs to the destination landing" "Press the call button when you need to go down" "The button light is on to indicate that the call has been registered (if the button has been pressed by another passenger, there is no need to press again), and the car is about to come to the landing to stop.

When the car arrives at the landing, the arrival bell sounds to alert passengers, and passengers are confirmed by the landing door direction light that the car will go up or down. If the direction of the car is the same as the direction of the call, the light of the call button that has been pressed will be extinguished, indicating that the passenger can take the elevator; If the direction is reversed, the call button light will not go out and the passenger will still have to wait.

When the car door is opened, passengers should get down first and then get up, and passengers entering the elevator should stand on the side of the door, let the passengers out of the elevator go first, and passengers entering and exiting should not push each other.

The car door closes automatically within seconds of opening. If it is necessary to delay the closing of the car door, press and hold the door opening button "i" on the control panel in the car; If you need to close the car door immediately, press the door close button "i". As soon as you enter the car, press the destination landing button in the layer selection button (if you hesitate, the car will answer other calls first, thus extending your ride time).

The button light is on to indicate that the selection is ready to be registered, and the cars will go in order of running direction. If there is a car handrail, the infirm person should try to hold the handrail.

Pay attention to the landing station that the car arrives at indicated by the landing display in the car. In the middle of the car, a new car layer selection occurs. The car will stop in the right direction. When arriving at the destination landing, after the car stops and the car door is fully opened, exit the car in order.

Generally, the elevators I see are inclined elevators and passenger elevators, the inclined elevator is very simple, just stand up directly, just pay attention to not standing on the yellow line when standing, and the passenger elevator is as follows:

1. On the outside of the elevator, we can see that there are two arrows up (representing going upstairs) and down (representing going down), as well as a display screen (showing the current operating status, such as an upward arrow and the number 5, indicating that the elevator is in a state of rising to the 5th floor).

2. According to your own needs, press the up arrow or down arrow, which is the arrow of the elevator to brighten, indicating that the elevator has received instructions, and later to reach the floor where you are, this is what you need to wait for the elevator to arrive.

3. When the elevator arrives at the location of the floor you are in, the elevator door will automatically open, and you can walk directly into the elevator.

4. The number button represents the floor you want to go to, some buildings have a basement, and the basement is generally represented by a B+ number, such as B1 represents a basement. Press the floor you want to go to, and the button indicator light will be on, indicating that the elevator has received instructions, and then wait for the elevator to arrive at the floor you want to go to.

5. Above the inner department of the elevator, there is a display of the elevator running status of the oak shouting screen, and the display screen outside the elevator is the same, pay attention to the elevator to reach that floor, don't do it.