How to park the car with automatic transmission and what are the steps

Apply the brakes, brake and stop. Shift the gear to P and pull the handbrake. Turn off the ignition again and finally take your right foot off the brake pedal. Keep that in mind.

Brake stop - handbrake - P gear - turn off.

Brake, ignition, release handbrake, D gear.

It's great if you have a car. I've driven a (Dongfeng) car before, and it's bigger than yours!!

When the traffic police see me, they still have to salute!!

Think of it as a toy!! The operation of the automatic transmission is too easy!!

Brake Stop -(Handbrake) - P Gear -Turn Off - Close the Door - Get Up and Walk Away!!

When starting, remember to be in neutral or P crotch, otherwise it will hurt the car very much.

After stopping, the gear is placed on the P gear. Then turn off the heat.

When starting, remember to be in neutral or P crotch, otherwise it will hurt the car very much.

Turn off the air conditioner - stop - neutral - handbrake - p gear - turn off - pull the key.

What are the steps of automatic stop The steps of automatic shutdown are as follows:1. Stop the car.

2.Press the brakes and shift the gear to nth gear. 3.

Handbrake and footbrake. 4.Hang the P file.

5.Turn off the flames. Here are a few things to keep in mind:

1。Be sure to hang up the P file. In fact, the P gear can be understood as the N gear, but the P gear has a locking stop.

In the P gear, the locking gear can be used to lock the gear of the output shaft on the gearbox, so as to play the role of fixing the stationary vehicle attacking the vehicle. Now there are many models, and you can't turn it off without a P gear. This is for safety reasons, in case the owner forgets to put on the P gear.

Ant shouts 2Pull the handbrake first, and then engage the P gear. As for the reason, the simple understanding is:

If the vehicle is subjected to external force, pull the handbrake first, and the handbrake will be forced; Put the P gear first, and the gearbox is stressed. Repairing the handbrake is simple and cheap, but repairing the gearbox can be troublesome. Especially where there are slopes, due to inertia, if the car does not pull the brakes first, it will skid.

At this time, if the P gear has been engaged, the gearbox will be stressed, and there will be some wear. In fact, the function of P gear is a bit similar to that of manual transmission models, that is, the first gear is used to prevent the car from skidding. What really stops the vehicle from moving is the handbrake.

The accurate steps of automatic transmission parking are: 1. Step on the brakes and slow down to stop; 2. After stopping, hang into N gear; 3. Tighten the handbrake; 4. Release the foot brake to confirm that the vehicle is stopped; 5. Step on the foot brake again and hang it into the Li nuclear rental P gear; 6. Turn off the fire and leave. Professionals who pointed out that this kind of automatic stop is accurate, and the "landslide force" of the handbrake vehicle is initially felt, which lightens the car.

Automatic car parking steps The accurate steps of automatic car parking are: 1. Step on the brakes and slow down to stop; 2. After stopping, hang into N gear; 3. Tighten the handbrake; 4. Release the foot brake to confirm that the vehicle is stopped; 5. Step on the foot brake again and hang into P gear; 6. Turn off the fire and leave.

When the engine is running, the automatic transmission also restricts gears, which is an adjustment made by the manufacturer for safety reasons. Usually, the engine starts only when the gear lever is in the P or N position. If the gear lever is in the driving position, such as D, R, etc.

The engine does not start. The purpose of this restriction is to prevent the vehicle from colliding with front, rear, left, and right objects. If a novice can't start the engine, the first thing to check is whether it is a mistake.

If he is not in P or N gear, he should adjust first and then run the vehicle.

The correct steps for automatic car parking First of all, it can be seen from the automatic transmission that there are N gear and P gear for the driver to park, where N gear is temporary parking, and P gear is set to long-term parking. N-speed automatic parking is special. Because only N gear is used, the car is prone to landslides.

Therefore, stop for a short period of time, and at the same time, which trillion uses the n gear when the vehicle is completely stopped. Secondly, when parking, many people are confused. Finally, you need to relax the foot brake first, then pull the handbrake and turn off the engine.

Or pull the handbrake first, then put the foot brake and turn off the engine. Which of these two ways is right? For these two ways, we also have different views, that we should "put the foot brake first, and then pull the handbrake", the key is from the perspective of the car; But the key to "pull the handbrake first, then put the footbrake" comes from a safety perspective.

That makes sense, but we don't have to worry too much about it. It is impossible to say that the gearbox was ruined because of this. Generally speaking, the manufacturer gives us the method of use:

Direct P gear, handbrake, turn off and leave. All automatic transmission models support P gear shutdown and key pull-out, except for some automatic transmission models, which cannot be pulled out in N gear. I believe that many car owners also park like this, but if you park like this, you may feel very hard when you drive next time, which is related to the working principle of P gear.

After parking, put into n gear; 3.tighten the handbrake; 4.Release the foot brake to confirm that the vehicle is parked; 5.

Press the foot brake again and put it into P mode; 6.Turn off the flame and leave. Automatic Transmission Car Parking Steps @2019

Hello, the automatic transmission car parking steps have the following points:

1. When the car stops, slow down first, step on the brakes, and hang into N gear, here do not directly shift to P gear and then turn off the engine in order to prevent the gearbox from passing through R gear in the engine starting state, so as to reduce an impact.

2. Turn off the fire, the electricity will not be cut off at this time, because it is not hung into the P file, and the key is not loud and bright.

3. Tighten the handbrake and release the foot brake, here you can feel that the force has acted on the handbrake, and after the car is stationary, then change to the P gear, so as not to act on the P gear.

4. Cut off the electricity and pull out the key.

Hope it helps!

The details of the automatic transmission parking steps are as follows:1. Stop the car by stepping on the brakes;

2. Hang the gear from the D block to the N gear stool book;

3. Pull the handbrake and turn off the fire;

4. Release the foot brake and do not turn off the power to ensure that the car can completely stop under the action of the hand brake;

5. Step on the foot brake and pull the gear Xianghong from N gear to P gear;

6. Release the foot brake;

7. Turn back the key, turn off the power and pull out the key.

The best steps to park are: brake - n gear - handbrake - p gear - turn off, some are directly p gear and then turn off, I used to be like this, but there were two times when the ignition started when the car chassis seemed to be broken in the east bureau of the east bureau, bang, the back of the online query said that the parking beacon order is not the right bend brother, and then I changed to brake - n gear - handbrake - p gear - out of the ignition, and there was no more out.

The details of the automatic transmission parking steps are as follows:1. Stop the car by stepping on the brakes;

2. Hang the gear from the D block to the N gear stool book;

3. Pull the handbrake and turn off the fire;

4. Release the foot brake and do not turn off the power to ensure that the car can completely stop under the action of the hand brake;

5. Step on the foot brake and pull the gear Xianghong from N gear to P gear;

6. Release the foot brake;

7. Turn back the key, turn off the power and pull out the key.

1. The correct steps for automatic transmission parking The correct way to stop in automatic transmission is: after arriving at the parking position, press the brake until the vehicle stops smoothly; Push the brake lever into n gear and do not release the brake at this time; Pull the handbrake. Depending on the flatness of the ground, the handbrake can be pulled tighter if you park your car on a ramp; Pull the hand brake and release the foot brake.

At this point, if on a ramp, the vehicle will move slightly. 2. The correct operation of automatic gear parking After the parking is stable, step on the brake again, hang the P gear, and then get out of the car and lock it. Auto Gear Description:

p Parking gear. When the owner stops and isn't in use, the gear is here. At this point, the wheels are mechanically locked to prevent slipping; r reverse gear, used when reversing; n Neutral for temporary parking (e.g. red light); dForward gear, also known as drive gear, is used in forward gear.

Automatic cars are being accepted by more and more people, so how do you stop automatic cars? Improper operation can cause some damage to the car. Let me share with you the correct steps for automatic parking.

How to park: 1Brake on the brakes to stop; 2.Pull the gear from D to N;

3.Tighten the handbrake and turn off the heat;

4.Release the foot brake, but do not turn off the power (the purpose is to confirm that the car can come to a complete stop with the foot brake);

5.Press the foot brake to pull the gear from N to P;

6.Release the foot brake.

7.Turn the key back, turn off the power, and pull out the key.

Six do's and don'ts for driving an automatic transmission car.

1.Never coast in N gear while driving, as the automatic transmission needs to be lubricated. When the gear is hung in N gear during driving, the oil pump cannot supply oil and lubricate normally, which will increase the temperature of the components in the transmission, causing complete damage!

In addition, it is also dangerous to slide into neutral gear at high speed, and it is not fuel-efficient! When sliding at low speed and parking, the pin can be put into N gear in advance, but it has no effect.

2.When stopping temporarily (such as waiting for a red light), there is no problem with n or d, and you can do it according to your habits. If you stop for more than half a minute, you can hang on the N-hand gate.

3.The vehicle can only start in P and N gears, and the brakes must be applied when removing the gear lever from P gear. The purpose of the N-gear start is that when your vehicle starts to drive directly forward, you can first turn on the power (without starting the engine), press the brakes, pull the gear to the N-gear, and then ignite, and then put it into the D gear to drive directly forward, so as to avoid the need to go through the R gear after the ignition of the P gear, so that the gearbox experiences a reverse impact!

In addition, when the engine suddenly stalls while driving, it is possible to quickly push the gear to nth gear to ignition and then start the engine when it is safe to do so.

4.Automatic transmission cars are not allowed to be pushed into P gear while driving. When the direction of travel changes, the switch between D and R must wait until the vehicle stops.

5.When parking at the end of driving: After the car enters the parking position, step on the brake - pull the gear lever to the n position - pull the handbrake - release the foot brake and turn off the engine - push the gear lever to the p position - pull out the key!

6.In general, you don't need to press the shift button when shifting between N, D, and 3rd gear. You must press the shift button when downshifting from 3rd gear, and you don't need to press the shift button when shifting from low to high.