Have you ever used Huangming Solar s friends, and how is the effect of using it in winter

Hello, in good weather solar energy is used well, but when it comes to rainy days, we have no spectrum, and we are very worried about the use of solar energy, in fact, this is also a problem that many solar users are concerned about.

The key to judging whether the solar water heater is easy to use or not is whether it can produce hot water in winter and continuous rainy days. In order to ensure winter, even.

Continue to make hot water on rainy days, and Huang Ming did this.

1. Guaranteed to produce hot water:

2 Guaranteed hot water overnight:

Water tank insulation layer: 1. The polyurethane foaming process adopted, the automatic constant temperature and high pressure quantitative one-time foaming process, one-time molding, delicate feel, good thermal insulation effect, 3. Ensure that the hot water arrives smoothly at home

Pipeline insulation: 1. The connection between the water tank and the pipeline is the place where it is most likely to freeze and block in winter, Huangming has a patented technology insulation and anti-detachment module, which links the water tank and the pipeline tightly together to prevent the insulation pipe from falling off and freezing the neck;

You can also log on to the Huangming Climate Improvement Official**.

If you have any questions, please feel free to ask questions to the Huangming Enterprise Platform, and I will answer them for you in a timely manner.

Solar energy does not have much technical content, on the water tank insulation is better, that is, the insulation cotton is thicker, the vacuum tube is used in the tube or the high-end flat panel solar energy, it is recommended to use the five-star flat plate, the industry leader, I am doing solar energy, you can leave a message if you have any questions, you can not leave a contact.

Looking at the strength of the sun, it's generally good, and I haven't had any problems for many years.

The use of Huangming solar water heater is as follows:1. Boot self-test: turn on the power supply, make a "beep" sound when the machine is turned on, and after the self-test, the water level and water temperature will be displayed, indicating that the measurement and control instrument is in a normal state; Automatically replenishes water to a set water level.

2. Water level display: show the actual water level inside the solar water heater.

3. Water temperature display: show the actual water collision temperature inside the solar water heater.

4. Water level preset: press the "water level" button to preset the water to %.

How to use: 1) It is strictly forbidden to operate the electrical part with wet hands, cut off the power supply of the Side heat auxiliary system and antifreeze belt before bathing, and it is strictly forbidden to use the leakage protection staring plug as a switch, and the electrical part is strictly forbidden to start frequently.

2) When it is found that there is hot water in the cold water pipeline, it should be repaired in time to prevent the cold water pipeline from being scalded by hot water backflow.

3) When the indoor temperature is lower than 0, the water in the pipeline should be emptied and the water discharge valve should be kept open to prevent freezing damage to the pipeline and indoor copper fittings.

Solar energy should be one of the essential electrical appliances in our family, the emergence of solar energy for our life with Hui Yuan disturbed a lot of convenience, every day back home, we can quickly take a bath, even in the cold winter, we can also take a comfortable hot bath in a warm environment, the market solar energy is very much, such as the four seasons Muge solar energy, solar rain solar energy, Huayang solar energy and Huangming solar energy, Huangming solar energy as a well-known domestic brand, many people give priority to buy, But how does Huangming Solar use it? Let's tell everyone.

How to use Huangming solar energy:

1. The use of control valves

The use of stepless control valve: take the shower head in your hand, flush to the basin, bathtub or floor drain (can not rush to the human body), first turn the handle of the stepless control valve to the hot water end and lift it, the shower head will have water outflow, when you feel that the shower has hot water flowing out, turn the handle to the cold water end until the water at the required temperature can be adjusted. Press the handle when you are done bathing.

2. The use of antifreeze tape

1) Installed with anti-freezing control system: when the temperature is lower than zero, click the "anti-freezing" button of the instrument, the instrument will automatically enter the anti-freezing function state, when the outside temperature meets the starting conditions, the system will automatically connect the power to the anti-freezing belt, the anti-freezing belt will heat up, and the power supply will be automatically cut off when the stop condition is reached, and the cycle will start again and again, when the outside temperature is higher than zero degrees, click the "anti-freezing" button of the instrument, and the instrument will be withdrawn.

2) No anti-freeze control system is installed: when the outside temperature is lower than zero for a long time, plug the anti-freeze belt plug into the power supply, the anti-freeze belt enters the working state, start the pipeline anti-freezing function, and unplug the power plug of the anti-freeze belt when the outside temperature is higher than zero.

3) No matter which way of antifreeze is adopted, when we take a bath, we must cut off the power of the antifreeze belt or turn off the antifreeze function of the meter to ensure personal safety.

3. The use of SED thermal auxiliary system

1) Installed with electric heating control system:

Set the starting conditions of electric heating, start if the conditions are met, and turn off otherwise.

2) No electric heating control system:

3) When you feel that the weather is bad and the water temperature cannot meet the bathing requirements, you should start the SED heat auxiliary system. Before starting the thermal auxiliary system, test whether the leakage protection plug function is normal: plug the leakage protection plug into the socket of the corresponding model, click the "Reset" button, the indicator light is on, click the "Test" button, the reset button jumps, and the indicator light is off, indicating that the leakage protection plug is functioning normally.

After the test is normal, press the reset button, the indicator light turns red, indicating that the heating starts, when the heating reaches about 65 degrees, the indicator light of the leakage protection plug turns green, and the constant temperature is maintained.

The above three steps are the use of Huangming solar energy, the operation steps are still very simple, of course, many novices still have a lot of do not understand after buying Huangming solar energy, at this time you can consult retailers, detailed cavity ants to introduce the use of various components, solar energy can not only store hot water, but also automatically boil water, for our lives have brought great convenience, now in the modern city of us, has been inseparable from solar energy. If you encounter some minor problems with solar energy, you can also go to the local area to repair it in time.

You can get it for free