The development history of electronic panel saws 5

This is a long story, although the electronic cutting saw has only appeared in China for about 2 years, but it has long been very popular abroad!

After the beginning of Italy was displayed at the domestic woodworking machinery exhibition, the domestic began to develop electronic cutting saws!

Among them, the earlier brands are Nanxing, Jidong, Xinming, Fuhao, and later other brands are also doing it one after another!

Because of the advantages of reduced labor costs, high efficiency, and good safety, I have been buying better!

Electronic cutting saw foreign brands have Halma, SCM Kibin, etc., the saw road is all only with linear guide, domestic reciprocating saw manufacturers are a lot, reciprocating saw caused by the accuracy is slightly worse, can not be called electronic cutting saw. But in the real sense of what is called a chain saw, there are only 3 companies that can be similar to the structure of foreigners, Nanxing, Zheng Tai and Jidong. The above three high-profile saw road design is equipped with linear guide rail, this technology is not so easy to master, Nanxing and extreme eastern rail configuration price is more than 300,000 yuan, Zheng Tai is now the mainstream is equipped with linear guide rail.

**Only 16w. Relatively cost-effective.

The electronic cutting saw is 2-3 years of development time, as for 10 years and 20 years, I don't know where to start.

The electronic cutting saw is based on the reciprocating saw to add an automatic feeding device, configure a touch screen, implant a CNC program to install a panel saw, which has only risen in China in recent years, and the cutting work of the electronic cutting saw is still completed by the reciprocating saw.

Foreign woodworking machinery is done early, and its well-known brands are: Halma, SCM Jibin, Bias and so on.

The well-known brands of domestic electronic saws are: Nanxing, Jidong, Ma's and so on.

The electronic cutting saw is developed on the basis of the reciprocating saw, and the quality of the reciprocating saw has a great impact on the use of the electronic saw, and the foundation of the reciprocating saw is very important.

Tongkaiyuan automatic computer panel saw features:

What are the advantages and operating procedures of automatic electronic saws, electronic panel saws, and computerized panel saws?

The cutting speed is controlled by frequency converter, which can overcome plates of different thicknesses and different materials;

Automatically detect the sheets, and quickly return to the original working state after cutting the required plates;

The manipulator feeds the material automatically, with low labor intensity and high production efficiency;

The feeding adopts pneumatic floating ball table, which makes it easy to make heavy sheets;

The perfect equipment of the tracking suction system can fully meet your high-quality requirements;

The original imported computer numerical control automatic positioning, eliminating man-made errors, greatly improving the dimensional accuracy;

The cutting expert plate cutting and discharging optimization software can greatly improve the user's work efficiency, reduce production costs, improve revenue, and improve the utilization rate of plates, which is the best choice for enterprise plate cutting and discharging.

According to the comprehensive data obtained from the actual production and usage, the utilization rate of the plate is significantly improved and the raw material cost is reduced after using the cutting expert plate cutting and nesting optimization software. At the same time, the software's dynamic tracking management of leftovers further improves the utilization of leftovers and reduces costs again.

Workflow: The worker puts the raw sheet to be processed into the working surface of the electronic saw or the automatic loading equipment feeds the --- button to instruct the clamp to clamp the sheet material--- start automatic operation--- enter the automatic working --- automatic positioning--- automatic trimming--- automatic sawing --- automatic discharging--- and automatically complete the cutting according to the input data.

Processing type: furniture factory, electrical factory, garment factory, play furniture factory, hardware factory and other plate precision cutting, such as wood-based panel, aluminum plate, plexiglass, MDF, MDF, creative board, PVC board, solid wood, acrylic board, marble board, etc.;

Shunde Ming'an's electronic cutting saw is one of the best in the industry. High cutting precision, fast sawing speed, stable use, **affordable!

Electronic cutting saw operation process:

1.First turn on the power on;

2.Look at the touch screen prompt, whether the manipulator has returned to the original point (if not, click to return to the original point);

3.Dimensions (enter the length and width of the material);

4.Enter the size and number of sheets to be cut (e.g. 200*5, representing 5 sheets of 200 long sheets);

Precautions for the operation method of the electronic cutting saw:

1.Before the machine tool starts, it is necessary to carefully check whether the saw blade pad and the compression nut and the screws of each part are firm, and if there is any looseness, it should be tightened in time. When installing the saw blade, pay attention to the cutting direction, which is irreversible.

2.Precision sliding table saws do not allow the saw blade to work without a protective cover.

3.Precision sliding table saw When feeding by hand, the wood must be close to the workbench and the positioning plate, and the hand can not be too close to the saw blade, and it is strictly forbidden to process the wood that the hand can not control. Electronic panel saws.

5.Before processing, the wood should first be checked for nails, sand and gravel, joints, etc., so as to prevent damage to the saw blades and joints from flying out and injuring people.

6.The precision sliding table saw can not stand in the cutting direction, and the operator should also pay attention to safety when collecting wood.

7.The power supply must be cut off before cleaning the machine, lubricating it, and removing saw blades and wood chips.

8.When the precision sliding table saw fails, the power supply should be cut off immediately, and the operation should be stopped, and the machine tool should be repaired and adjusted by a special person, and the machine tool is not allowed to run with faults.

Dear, I am inquiring for you, please wait a while, I will reply to you immediately The first step of the electronic cutting saw operation process is to turn on the power first; The second step is to see if the touch screen prompts whether the manipulator has returned to the original point (if not, click to return to the original point); The third step, size (enter the length and width of the material); The fourth step is to enter the size and number of sheets to be cut (e.g., 200*5, representing 5 sheets of 200 long sheets); Step 5, click the big saw to start, the small saw to start, the fan to start, and the cycle to start, and press the run button next to the computer! The electronic cutting saw can generally input 10 sets of different raw material sizes at a time until the raw material is cut.

The process can also be completed at the same time by entering the dimensions of the material to be turned around (selected large groups, which can be continuously cycled). Note: Different raw materials are entered in different ways in both horizontal and vertical dimensions.

The electronic cutting saw has high cutting accuracy, efficient board cutting, hands-free operation and labor saving. Fool-proof picking. Computerized panel saw, also known as electronic cutting saw, is an upgraded product of hand push saw and reciprocating saw, and its operator only needs 1-2 people.

Man-machine integrated operation, input the data that needs to be cut on the touch screen or PC, and carry out accurate processing of the plate by itself after starting.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up

Summary. The difference between an electronic panel saw and a robot saw is as follows: an electronic panel saw is mainly used for slotting and cutting wood, while an electronic saw is used to cut metal, plastic or stone.

The blades of the panel saws are made of steel blades that are compatible with wood, while the blades of the saws are special high-speed steel blades that can effectively cut metal, plastic or stone. In addition, panel saws have a lower cutting noise, while electronic saws produce a higher cutting noise.

The difference between an electronic panel saw and a robot saw is as follows: an electronic panel saw is mainly used for slotting and cutting wood, while an electronic saw is used to cut metal, plastic or stone. The blades of the panel saws are made of steel blades that are compatible with wood, while the blades of the saws are special high-speed steel blades that can effectively cut metal, plastic or stone.

In addition, panel saws have a lower cutting noise, while electronic saws produce a higher cutting noise.

Panel saw: An panel saw is an electromechanical cutting tool that can cut metal or other materials into the desired shape. The function of the electronic panel saw is to cut metal or other materials quickly and accurately, and it has a high production efficiency.

Electrosaw: A cybersaw is an electromechanical cutting tool used to cut metal or other materials. The role of the electronic saw is that it can quickly and accurately cut metal or other materials without manual operation, and has high production efficiency.

Electronic panel saw: The electronic panel saw can cut solid materials or multi-layer laminated film products into the desired shape, which has the advantages of fast cutting speed, high cutting accuracy and energy saving. Chainsaw:

A wire saw is an electric machine used for cutting wood. It has the ability to cut many of the most popular novel wood materials, such as oak, mahogany, neem, etc. It can also cut flakes of hardwood, plastic, metal, and glass, as well as hard stone.

First of all, the operator must be very familiar with the electronic cutting saw, whether it is the structure of the cutting machine, the scope of application, or the technical specifications of the cutting machine and the safety rules that must be observed when using, they must be familiar with it, so as to avoid accidents when using. In addition, before the formal operation, the operator is generally required to take an examination, and only those who pass the examination can operate the electronic cutting saw. Secondly, before the official start of work, it is necessary to conduct a comprehensive inspection of the electronic cutting saw, check whether the connecting bolts of each part of the cutting machine are loose, check whether the transmission device of the cutting machine is running smoothly, check whether the buttons of the cutting machine are normal, and check whether the lubrication system, pneumatic system and various safety systems of the cutting machine are in good condition.

When these have been checked and there are no problems, the normal boot operation can be carried out.

Electronic cutting saw is a kind of mechanical equipment commonly used in metal processing, and its bending operation method is as follows:1Preparation:

Place the metal material to be processed on the panel of the panel saw and fix it with a fixture. Turn on the power switch of the electronic cutting saw, and set the parameters according to the requirements of the manual. 2.

Debugging cutting parameters: set the cutting line speed, feed speed, cutting depth, saw blade angle and other parameters in the buried file. Reasonable parameter adjustment is carried out according to the hardness, thickness and other different characteristics of the processed material.

3.Start machining: Start the electronic cutting saw according to the preset parameters, pull the saw blade handle, and let the saw blade start working.

In the process of processing, it is necessary to pay attention to the working condition of the saw blade, keep the cutting speed and cutting depth of the saw blade stable, and ensure the accurate size of the processed parts. 4.Finished machining:

When the machining is complete, turn off the power switch of the electronic panel saw, wait for the saw blade to stop, and then remove the machined parts. Clean residues such as metal shavings from work surfaces, saw blades, and other components. It should be noted that when using electronic panel saws, it is necessary to comply with relevant safety operation regulations, such as wearing personal protective equipment such as protective glasses and gloves, and avoid hand contact with dangerous parts such as saw blades.

In addition, the wear and tear of the saw blade should be checked frequently, the saw blade should be replaced regularly and the equipment should be maintained to ensure its normal operation and processing effect.

1.Preparation: Place the sheet to be cut on the electronic cutting saw and hold the sheet as firmly as possible to prevent movement during the cut.

2.Adjust the sawing machine: Adjust the height and angle of the sawing machine to get the best cutting angle according to the size and thickness of the sheet to be cut.

3.Adjust the saw blade: Select the blade that is suitable for the material to be cut, make sure the blade has the proper tension, and then install the blade into the panel saw.

4.Prepare the cutting program: according to the material to be cut and the requirements, the cutting program of the electronic cutting saw is put into the cavity to destroy the appropriate settings and adjustments.

5.Start cutting: Press the start button on the cutting saw to start the cutting program and wait for the sheet to be cut to be completely cut.

6.Safe operation: Pay attention to safety during the cutting process, be vigilant, and avoid touching the saw blade socks or being injured by the plate.

7.End operation: When the cutting is completed, turn off the power of the electronic cutting saw, remove the cutting garbage and carry out maintenance.