How to maintain the computer security of the CNC cutting machine?

Computer abnormalities can also cause many problems, pay attention to clean up viruses. In the process of maintenance, we found that the computer abnormality also caused a lot of unnecessary trouble to our maintenance, and also delayed the customer's business

1. Clean up the dust of the chassis regularly, pay attention to the heat dissipation of the chassis, and be careful of errors caused by excessive dust.

2. Regularly defragment the disk and optimize the computer system.

3. Check and kill viruses regularly, but pay attention to not opening the anti-virus program when working, and be careful of interference.

Now the software used by the panel furniture CNC cutting machine is specially used to customize the wardrobe, the whole cabinet of the plate cutting, cutting and punching, only we need to simply build a model of the required board. Generally, high-level operators can be very proficient in two or three hours. The software of the panel furniture CNC cutting machine does not require you to write the path, but there is one requirement:

You have to know how to assemble the cabinet, where to use what kind of board, how to punch holes in the neutral board, how to set up the lattice, etc. In addition, for some special-shaped shapes, we need to use CAD to make a figure and send it to the software for blanking and cutting. Learning panel furniture CNC cutting machine, the use of software is one thing, we also need to know how to maintain and maintain the machine.

It's like we drive, if you maintain it diligently, you may be able to increase the service life by a few years. Pay attention to the maintenance and cleaning of the table top of the usual cutting machine, if the table surface is uneven, and re-level the table surface to ensure the processing effect of the machine. Some customers' work surfaces are high and low, and the boards of the wardrobe cabinets are not firmly adsorbed at all, so the size of the processed will definitely not be accurate.

In recent years, more and more furniture companies have used woodworking engraving machines for panel furniture cutting. The CNC cutting machine is cheap and flexible, which can not only cut straight lines, but also cut arbitrary complex curved lines, so as to realize the integration of punching, slotting and cutting. The CNC cutting machine for panel furniture is mainly used for the cutting, punching and other processes of the plate, and the general machine has to work for more than ten hours a day, so that the daily maintenance of the machine will have an important impact on the service life of the machine.

The CNC cutting machine must pay attention to the following points in the daily use process:

First, do a good job of dust removal on the table and various parts of the CNC cutting machine. Once the dust enters the inside of the equipment, it will cause great trouble to the equipment, affect the normal use of the equipment, and affect the production efficiency. Therefore, in daily use, it is necessary to clean the surface of the machine table and the casing, and do a good job of cleaning.

Second, it is necessary to do a good job of rust prevention for CNC cutting machines. Once the equipment rusts, some parts will age and other problems, so that the work efficiency of the CNC cutting machine will be reduced, so the equipment must be regularly smeared with anti-rust oil to avoid rust of the equipment.

Third, do a good job in the lubrication of the transmission device of the CNC cutting machine. When the equipment is running, if the equipment transmission device is not running smoothly, it will lead to uneven feeding of the equipment, affect the quality of blanking, and have a certain impact on industrial production. Therefore, it is very important to lubricate the equipment transmission device in daily maintenance.

If the machine wants to be used for a long time, it is necessary to do a good job of maintenance work, and learn more about the precautions for the use of the machine. The above is a description of the precautions that need to be paid attention to in the use of the CNC cutting machine, and I hope you will do a good job in the maintenance of the machine in daily use.

The first step is to turn on the power and release the emergency stop button of the CNC cutting machine. In this way, we can ensure that the CNC cutting machine has been ready for start-up.

In the second step, the computer connected to the CNC cutting machine should be turned on, enter the established operating system, find the software that controls the equipment, and double-click to open the CNC feeder software on the computer.

The third step is to check whether the CNC feeder system is normal. If there is any error in the system about the CNC cutting machine, it can no longer be used to work, and the cause of the error can be found and repaired.

The fourth step is to measure whether the size of the workpiece will exceed the range of pneumatic pliers of the CNC feeder, and make adjustments. Once the workpiece is too large, it will greatly affect the normal operation of the equipment, and more serious may cause damage to the machine.

The fifth step is to start the pressure device of the CNC cutting machine, and the normal processing can only be carried out after the test is fine.

The above is the operation and start-up sequence and requirements of the CNC cutting machine of the panel furniture production line, the customer must operate and use in strict accordance with the requirements in the process of operation and use, and the order of each step can not be reversed at will, otherwise it is easy to cause unnecessary failures; The operation in strict accordance with the order can also better improve the processing efficiency and quality.

1. Clean up.

In maintenance, we often find that most of the materials are cut after use.

The machine is not cleaned up in time, in fact, cleaning is very important.

1. After the processing is completed, the dust and sawdust on the countertop and exposed electrical accessories should be cleaned up in time to keep the countertop and the machine clean and hygienic.

2. Regularly clean the stains and debris on the guide rail, rack and slider to prevent debris from interfering and causing problems in the process.

3. Regularly clean the lead screw of the engraving machine to prevent foreign objects from sticking to the screw. The lead screw determines the accuracy of the machine in the equipment, and the lead screw also plays an important role in the transmission process.

4. Clean the electrical box regularly, the dust is the largest on the circuit board, and a little more dust will lead to problems in the operation of the circuit board, and it is easy to have breakpoints, run around, etc.

2. Lubrication Some often ignore the problem of oil injection of the cutting machine because of busyness, and some of them are due to seasonal reasons, and the equipment is not oiled for several days. Experience tells us that oiling plays an important role in the maintenance process of the cutting machine, and the correct approach is: 1. Clean up the guide rail and the lead screw, and use a cloth (not to take off) to clean up the oil stains and material chips on the guide rail and the lead screw.

4. After adding oil, walk back and forth slowly to ensure that the lubricating oil can be evenly added to the guide rail and lead screw.

1. Choose a regular CNC cutting machine manufacturer; 2. Select the appropriate configuration according to the processing requirements;

The customer is inspecting BAI

When the equipment is very concerned, the price of the equipment is very important, and the level of **dao is usually very related to the quality of the equipment. A first-class equipment, practical accessories must be good, the production process requirements are also high, such a device manufacturing cost is high, relatively high. The equipment is also more durable.

We buy equipment back to create profits for ourselves, if only for the sake of cheap, buy poor quality equipment, buy back soon after such and such a problem, when the time can not contact the manufacturer or the manufacturer does not care, the result becomes a pile of scrap iron, then regret it too late! Because you care too much about the ** and ignore the quality problem, the gain outweighs the loss!

Nuocheng CNC customers in this majority of customers, in the purchase of equipment must choose such a powerful manufacturer as Jinan Nuocheng CNC equipment, whether it is product quality or after-sales service is very good!

Hello, have you bought the precautions after the cutting machine, or did not buy the precautions when you buy it, I will answer you according to the information fed back by our factory after buying it, the precautions for buying the machine can see the Q&A I sent before:

Maintenance of the machine This is one of the most neglected things, such as: the guide rail is often rubbed with oil to prevent wood chips from entering, causing the guide rail to lock up; The dust wiping of the chassis sometimes leads to insufficient accuracy of the machine because of this interference signal. Take care of the machine, dust removal and maintenance frequently, and the life of the machine will increase accordingly.

The ground wire of the machine Everyone knows that the grounding wire is to prevent static interference, and the current training personnel are mixed, and many people do not pay attention to the small matter of the grounding wire, and feel that nothing will happen. But it is often this small thing that causes the control signal to be transmitted to the motor with an error signal, so that the machine runs the knife, sometimes deep and sometimes shallow, and has a large error.

Machine parameters This is mainly in our software, because the materials we process are different, and the processing speed must change at any time, such as poor particle boards mixed with stones, and the speed is too high. The light one will cause the cutter to collapse, and if it is not changed in time, the broach will cause the edge of the board to be cut unevenly. Serious will rub ** and cause accidents.

The vacuum pump of the machine Many vacuum pumps are water pumps, and the adsorption effect is still good, but since it is water, it will cause freezing in colder places in the north. The water tank of the vacuum pump should be cleaned once a month, and sometimes impurities block the hole of the water pipe, and the water cannot be returned to the pump, and the seal cannot be produced. The adsorption force is almost zero.

Wrote so much.,It's all pure hand.,I hope the subject will adopt.,Thank you!

Now the CNC cutting machines are all computer numerical control cutting machines, and they are all fully automatic CNC cutting machines. It's very easy to use!

CNC cutting machine is a CNC panel furniture production equipment that has been widely used in the past one or two years, CNC cutting machine is mainly used to punch, slot, and cut 1220mm*2440mm large slabs. The functions of CNC cutting machine include drilling, blanking, cutting, chamfering, milling, engraving, and hollowing. It can be applied to wardrobe cabinets, cabinet cabinets, computer desks, and panel furniture.

Computer numerical control cutting machine is a good helper for furniture factories. Shandong CNC cutting machine brand dozens of I was with my friend furniture factory together to buy inspection, compared a lot of home, the last buy of Shandong Biesse brand production has been used for more than half a year is still very stable service is also very timely, you can go to your own understanding of the field trip or go to their local users to see the actual processing situation.