The file cannot be deleted, the USB flash drive cannot be formatted, and the system prompts Windows

USB flash drive repair tool (Portfree Production Program How to use:

1) Click on the bottom right corner of the software"option ", a window as shown below will appear.

2) Please select"others ", select"type "— >"removable"

3) Please select"capacity adjust ", here select the capacity of your USB flash drive; If you don't have the capacity you want here, click it"add "and fill in the capacity you need.

4) Please select"flash test", select"low level format"；There are two parameters here, one is all blocks (it means low-format the whole disk) and the other is goods blocks (it means only low-format good blocks, this parameter is suitable for USB disks with bad areas).

5) Once you have selected all of them according to the above methods, click on them"ok", save the settings, then connect the USB flash drive to your computer, and click"run"to start low formatting.

Procedural problems, you can go to ** to find some businesses that specialize in U disks, such as Lixin Digital City and Xinchaoli These two have very good customer service. Whether you are his customer or not, he will help you serve and help you solve your problems.

USB flash drive equipment is often used by everyone to store, copy, and transfer data. USB flash drive devices will also encounter all kinds of strange problems in the process of use, such as a user recently said that it isghostwin7 systemWhen the computer formats the USB flash drive, it prompts "Windows cannot complete the format", how to solve this problem? Next, I will share with you the specific solution, and users who encounter this fault problem will take a look at the following steps to solve it.

Recommended:

Method 1: 1. Try to use the "360U disk identification" tool for the first time to detect the actual capacity of the Sakura landscap, so as to select the appropriate "file system" type during the formatting operation. When the memory of the USB flash drive is greater than 1G and less than 4G, it is recommended to use the FAT32 format for formatting.

2. When performing the format operation on the USB flash drive, in the pop-up "Format Removable Disk" window, click the "Restore Device Defaults" button, and then click the "Start" button to try to format the USB flash drive;

3. Select "Low-level Format" USB flash drive. In the "Format Removable Disk" window that opens, uncheck the "Quick Format" item, and then click the "Start" button to try to format the USB flash drive.

4. Right-click "Removable Disk" and select "Properties" from the pop-up menu. In the window that opens, switch to the "Tools" tab and click "Check the error to start detection";

5. In the pop-up window, make sure to check the first item, and then click "Start Repair";

Method 2: 1. Open the "Run" dialog box (press Win+R to open it), enter "cmd" to enter the MSDOS interface;

2. Then enter "formatj: fs:fat32" (where j represents the drive letter where the USB flash drive is located) and press the enter key to perform the USB flash drive formatting operation;

4. When the above error prompts the spine, due to the generation of bad sectors in the large panel, the usable capacity of the USB flash drive is reduced, so only the "FAT" file system can be used to format the USB flash drive;

5. If there are fewer bad sectors of the USB flash drive and the usable capacity is greater than 512M, you can use mass production tools to repair the USB flash drive.

Regarding the problem that the Win7 system computer prompts "Windows cannot complete the formatting" when formatting the USB flash drive, refer to the above two methods to solve it.