Fingering of the electronic organ 30, Fingering of the electronic keyboard

Fingering is marked with numbers, the right hand starts from the big finger 12345, the left hand starts from the big finger 12345, finger fingering: the right big finger passes under the middle finger and plays the next key, cross-fingers: for example, the middle finger of the right hand crosses the previous key from the big finger, and there are many fingerings such as skipping the staccato ......

I really can't put this into words. If you want to learn, it's best to go to the piano store and find a teacher to teach you. It only costs a little money to learn something.

It's to play your fingering smoothly and conveniently! Let's ask a teacher for help.

The pipa string is the thinnest string of the lute. The pipa is composed of six phases and twenty-four frets to form a wide range of twelve equal temperaments. One of the strings is steel wire, and the second string is two.

The third and fourth strings are steel rope nylon winding strings. The sound of the pipa is very special, and its overtones rank first among all kinds of musical instruments in ancient and modern China and abroad, not only with large volume, but also with crisp and bright sound quality.

Pipa is China's traditional plucked string string Ming Yun Hu musical instrument, made of wood or bamboo, the speaker is semi-pear-shaped, mounted with four strings, originally made of silk thread, now mostly made of steel wire, steel rope and nylon.

When playing the lute, press the strings with the fingers of your left hand and the ruler with your right hand to play the strings. In modern times, metal strings were used, and the right finger had to be played with a false nail. When choosing pipa nails, you should pay attention to the following matters:

Before buying nails, you must first measure the nail cover of your thumb, whether it is 1 cm high (small), centimeter (medium), or centimeter (large). Remember that you can only measure the part that is connected to the flesh, and the real nails that grow out do not count.

In the selection of false nails, attention should be paid to the three requirements of appropriate thickness, tough and wear-resistant texture, and smooth surface. Because if you use too thick material, it will lack elasticity, but if the material is too thin, it is not suitable to play the string hard; If it does not have a considerable degree of wear resistance, it will often break; If the surface is not smooth, you will feel unfluent when playing the strings.

The basic fingering of the electronic organ is as follows:1. Fingering.

This fingering technique is not spaced between the fingers, so that there is no need to stretch out, and (young children need to expand it moderately) so that the hand shape remains naturally relaxed. This is one of the most used fingerings.

2. Wear fingering.

Ask for a thumb from two or.

A fingering technique in which the third or fourth fingers pass under and move the handlebars of the fingers upward.

3. Cross-fingering.

The opposite of fingering. Ask for two fingers or.

A fingering technique in which the third and fourth fingers step over the big finger and move the handle of the finger downward.

4. Finger expansion.

This fingering is used when the distance between the two fingers needs to be increased due to the need for a smooth phrase.

5. Finger contraction.

Fingering is the fingering technique used when you need to reduce the distance between two fingers.

6. Homophonic fingering.

Use different fingers to play the same note.

7. Wheel fingering.

The fingers play a key in turn.

8. Implicit fingering (also known as "dumb change").

When the range between two notes is wide, out of the requirement of fluent phrases, a method of playing fingers but notes is constantly played. When using this fingering, it should be noted that the time value of the note pressed when changing fingers should not be too short.

Automatic chords and manual chords, one-finger chords and multi-finger chords, major third chords with one finger, minor third chords with one fingers, and seven chords with one fingers.

1. Automatic chords and manual chords.

Automatic chords can be said to be unique to electronic organs, and they are also one of the three basic elements of electronic organs. The area of a one-finger chord is generally the leftmost 14 black and white keys. The area of the multi-finger chord is generally the leftmost 19 keys (whichever is the case with 61 keys).

If there are discrepancies, you can try them out yourself.

2. Single-finger chords and multi-finger chords.

There are multi-finger chords first, and then single-finger chords. Multi-finger chords are automatic chords extracted from long-term practice, and single-finger chords are a further simplification of multi-finger chords. Easy to get started.

The same kind of chord is ever-changing. For example, the C chord, which is composed of do, mi, and sol. Playing these three notes at the same time is the effect of a C chord, which is also a C chord when played one by one in six different sequences, or by playing any two of them first and then one.

Any one or more of these pitched octaves or lower octaves or two octaves repeated are also C chords.

3. Single-finger strumming of major third chords.

The single finger strumming of a major third chord uses only one key. The C chord plays the sound c, which is do. The C chord plays the C note. The d chord plays the d, and so on.

4. Minor three chords single-finger strumming.

A minor third chord is played with two notes. Generally, you can flick your index finger and middle finger at the same time. Casios are different from others.

5. It belongs to the seventh-chord single-finger strumming method.

The genus seventh chord is played together with two notes on the common piano. You can use your index and middle fingers. Unlike other instruments, the Casio has three notes.

Automatic and manual chords, one-finger and multi-finger chords, major third chords with single finger chords, minor third chords with single finger chords, sevenths with single finger chords.

1. Automatic chords and manual chords.

Automatic chords, which can be said to be the unique feature of the electronic keyboard, are one of the three basic elements of the electronic keyboard. The area of a one-finger chord is usually the leftmost 14 black and white keys. The area of a polychord is usually 19-key left (61-key piano).

If not, you can try it yourself.

2. Single-finger chords and multi-finger chords.

First there are multi-finger chords, and then single-finger chords. Multi-finger chords are automatic chords that have been extracted from long-term practice, while single-finger chords are further simplifications of multi-finger chords. There are few types of single-finger chords that can be used in the introduction. Easy start.

Like chords are kaleidoscopes. Take the C chord as an example, the C chord is made up of three notes: do, mi, and sol, and playing these three notes at the same time is the effect of the C chord, which is played one by one in six different sequences, or playing two first, and then one, which is also a C chord. Any one or more notes in a higher or lower octave or in a repetition of two octaves are also c chords.

3. Play the major third chord with one finger.

The one-finger play of the major triad uses only one key. The C chord is played with C, which is DO. Play the C chord in the C note. D chords play d, and so on.

4. Play the minor third chord with one finger.

A minor triad is played with two notes. Generally, you can play the index finger and middle finger at the same time. Casio is not like the others.

5. It is a single fingering method of seven chords.

On a regular piano, the seventh chord is played with two notes. You can use your index and middle fingers. Cassio differs from other guitars in that it has three notes.

There will be fingering hints or markings when playing according to the score, but the electronic organ is not a piano after all, and it cannot be played too strongly, so many ways should be similar to the organ, that is, playing by touching rather than playing.

The fingering of the electronic organ is as follows: Shinyu.

1. To play the electronic organ, you must have a correct posture, and all parts of the hand should be naturally relaxed and not stiff. The upper arm (upper arm) hangs down naturally, and the lower arm is horizontally with the wrist and the back of the hand. The fingers are naturally slightly curved, with the last section perpendicular to the keyboard.

The thumb is touched with the outer slide of the rocky side, and the other fingers are touched with the fingertips.

The strength of the fingers playing the electronic piano should be slightly lighter, and it is not appropriate to use the strength of the piano to touch the keys. Because the player plays a general electronic keyboard, the strength of the touch does not affect the volume.

2. If you want to finish playing the 1234567, it corresponds to the thumb, index finger, middle finger, thumb, index finger, middle finger, and ring finger of the right hand. The next treble finger is flicked with the thumb. The left hand corresponds to the little finger, ring finger, middle finger, index finger, thumb, middle finger, and index finger.

The fingers of the right hand pass through the underneath, and the left hand straddles from above.

For beginners in keyboard instruments, fingering practice is best practiced by starting with the most basic fingering of the left and right hand scales.

3. It is not correct for the fingers to be too relaxed, or even light and fluttering, because sometimes there is no sound due to the shallow button and the electronic oscillator circuit is not dialed, and the natural weight of the hand is more appropriate. The five fingers of the right hand practice the monophonic in situ, first practicing staccato and then legato. Coupled with the five-finger in-situ practice of automatic bass, first slow and then fast, it is required to play at the tempo of the rhythm.

Learn the notation of major third chords, practice the left-hand major third chords, and practice a dual-use mixed practice: play the melody with the right hand, play the assigned major third chord with the left hand, and choose the assigned tone and rhythm.

The 8 basic fingerings of the keyboard.

1. Fingering.

When a phrase can be played out in place, follow the fingering. Funny (generally within five degrees) This fingering refers to the distance between the fingers, which must be extended, (and the younger children need to be moderately expanded) so that the shape remains relaxed. This is the most appropriate fingering.

2. Wear fingering.

Ask for your thumb to be removed from or.

Three or four fingers go down and move the fingers up.

3. Cross-fingering.

The opposite of fingering. The request refers to or.

The third and fourth fingers are fingered by stepping over the fingers and moving the fingers downward.

4. Finger expansion.

The fingering used when the distance between the two fingers needs to be extended due to the need for fluent phrases.

5. Finger contraction.

When you need to reduce the distance between your fingers, you will use the fingering technique of the socks. Handicap.

6. Change fingering.

Different fingers go to play the same .

7. Wheel fingering.

Refers to playing the keys in turn.

8. Implicit fingering (also known as "dumb change").

When the range between the two is wide, out of the requirement of fluent phrases, a kind of finger change but continuous playing method is adopted. When adopting this fingering, it should be noted that the time value of the one pressed when changing the finger should not be too short. <>