The driver could not be found when the system was installed on the computer

I'm the same as everyone,I've also been troubled by the hardware drivers of brand laptops,In fact, it's not difficult to find a driver on the Internet,The difficulty is that there is a corresponding driver that can't be installed or recognized in the case of correct installation,Because laptops are now using SATA (Serial ATA) port hard disks also called serial port hard disks,So after reinstalling the system, it will conflict with SATA,Only temporarily turn off SATA support mode can you enter Windows, So is the high-performance SATA hard drive a waste of resources? The answer, of course, is no, and I will summarize the installation of SATA hard drive on the Internet as an introduction

HP and most brands of notebook computers do not provide driver discs now, after reinstalling the system, you have to search for the same hardware drivers on the Internet, I believe that most HP notebook users have the problem of not finding SATA hard disk drive after reinstalling the system, the characteristic of this problem is that the PCI device cannot be found in the device manager, this PCI device is SATA hard disk, no driver Of course, the computer can not recognize the hardware, in fact, do not install SATA driver, In the BIOS, set the SATA support mode to disable (System Cofiguration---Device Confignrations--- SATA Native Node is off), the system can also run, but the performance and transfer rate of SATA hard disk are better than ordinary hard disks, so you just need to install SATA driver correctly according to the method I provided, You'll be able to enjoy the high-speed experience and high performance that SATA hard drives bring. Before you reinstall the system, turn off the SATA support mode in the BIOS, and then reinstall the system, after reinstalling the system, please first install the chipset controller and other drivers that have been integrated into the XP installation disk, and then install the drivers required by the HP notebook hardware (the **page at the bottom provides the notebook driver): Note:

Be sure to follow the prompts to restart the computer every time and install the notebook hardware driver in order, the installation order I provide: 1 chipset driver 2 Microsoft Universal Audio Architecture (UAA) bus driver 3 graphics card driver 4V3010AU sound card driver 5 network card driver 6 wireless network card driver 7 card reader driver 8 shortcut key driver 9 touchpad driver 10modem-modem driver turn off SATA in the BIOS before installing the SATA driver. Please **I provide the SATA driver compression file at the bottom, after decompressing the compressed file, the "file is the SATA driver", please manually select the device manager to point to the file to install the driver or search for the folder containing the file to install the driver, it is recommended to use the automatic search folder to install the driver.

After installation, turn on SATA support mode in BIOS, restart the computer, and the system will automatically recognize the SATA disk drive, haha! Get! Now enjoy the joy of high-speed SATA hard drives!

Let's go find a computer repairer.

Small card reader to drive elf cards.

When installing the system, the system shows that no driver device can be found, which may be caused by the following reasons:1The system installation CD or USB flash drive is damaged or improperly made.

2.The hardware device is faulty or not installed properly. 3.

The BIOS settings are incorrect or the versions do not match. 4.The version of the system installed is not compatible with the hardware device.

To solve the above problems, you can try the following solutions:1Check whether the system installation disc or USB flash drive is damaged or improperly made, and the installation media can be remade or replaced.

2.Check that the hardware device is working properly and installed correctly, and you can try to plug the hardware device back in or replace the faulty device. 3.

Check if the BIOS settings are correct or if the version matches, you can try to reset the BIOS or update the BIOS version. 4.Confirm that the version of the installed system is compatible with the hardware device, and you can try using a different version of the system or update the hardware drivers.

If the above methods still do not solve the problem, it is recommended that you contact the computer manufacturer or after-sales service center to repair or replace the device.