What is a converged IP network? What is NIC aggregation?

I guess it refers to the Internet, that's right.

The consequence of this is that the IP address of the E2 interface of the RB becomes a broadcast address (all bits of the host 1), which has a special purpose (broadcast) and cannot be configured on the interface. The same goes for the right.

Using a plurality of the same model of network cards, using software to group 2 or more network cards together, through the switch with network card management function, in the switch port convergence together, to achieve the effect of multiple network cards used at the same time, the original network card one IP, here only one IP is counted, but the bandwidth is calculated according to the network card bandwidth and calculation.

Route aggregation is the aggregation of a group of routes into a single route broadcast. The end result and most obvious benefit of route aggregation is to reduce the size of the routing tables on the network. This will reduce the latency associated with each routing hop because the average time to query the routing table will be faster due to the reduced number of routing logins.

Glad to answer for you, hope!

Supernetting is a similar concept to subnetting – IP addresses are divided into separate network addresses and host addresses based on the subnet mask. However, as opposed to subnets, which divide a large network into several small networks, it combines a number of small networks into one large network, the supernet.

Suppose there are now 16 Class C networks, from to, and they can be uniformly represented as networks with subnet masks.

Super-network division: Super-network division is the expansion of the network by borrowing network bits.

1.Then you must first understand the classification of IP: Class A subnet mask.

Class B Subnet Mask.

Class C Subnet Mask.

Class B Subnet Mask.

Class C Subnet Mask.

3.Super-network division, that is, borrowing network bits to expand the network, for example: the network does super-network division, the number of network segments included must be 2 power numbers, that is, 1, 2, 4, 8, 16, 32, 64, 128, 256 borrow 1 bit of network bits, quite 2 1 subnets are divided into a super-network, such as:

4.Network Range:

It can also be calculated as follows: 256-254 = 2 network segments.

In the same way, it can be understood that every n bit of network bit is borrowed into 2 n subnets.

This method can also be reversed: that is, when there is one network, we can get the other supernets divided: 22=24-2, 2 2=4 subnets, which can also be expressed as 252=256-4, 4 subnets.

i.e. a supernet.

Class A The number of host bits of the supernet is equal to the number of network segments*2 24-2

Class B The number of bits of the host of the supernet is equal to the number of network segments*2 16-2

Category C The number of bits of hosts in the supernet is equal to the number of network segments * 256-2, that is, 4 * 256-2 = 1022 hosts.

CIDR technology can be used to aggregate some smaller CIDR address blocks into one large CIDR address block, thereby greatly reducing the number of routing entries.

Supernet can be seen as the inverse process of subnet division!

Have fun!

: The mask is 21 bits, for a total of 32 bits. With 32-21=11, 11 bits are the host bits, and the 11th power of the host that can accommodate 2 minus 2 is equal to 2046. Therefore, it can accommodate 2046 hosts.

IP address, which is the IP address of the intranet, cannot distinguish whether it is accessing the Internet through the network of China Telecom or mobile or other operators.

CIDR refers to a block of addresses.

Route summarization is the aggregation of multiple route entries into a coarse route. The function of both is to reduce the number of route entries, aggregating multiple networks into a single route entry.

However, route summarization is generally carried out within the boundary of the main class network, while CIDR can merge multiple networks, CIDR does not have the concept of class, it is a pure numeric concept, CIDR is a mechanism to alleviate the problem of IP address exhaustion and routing table enlargement with notation. CIDR is based on the idea that multiple blocks of addresses can be combined or aggregated to form a larger set of classless IP addresses to support larger hosts. The CIDR mechanism can be used for Class A, Class B, and Class C address blocks.

The difference between CIDR and Route Aggregation is that Route Aggregation usually takes place within the boundaries of a classified network, whereas CIDR merges multiple classified networks.

The IP is assigned by the operator, and there will only be one on the Internet, how can you change it.

If you're setting it static, it's set in the neighbor property, but it doesn't make much sense.

There is also the use of ** server so that others can't see your real IP DE

Win7's ** Modify IP Method:

Step 2: Sign up for a free account.

Step 3: Connect the nodes of the software.

Direct software modification of the IP

Deep IP Converter.

Computer Mobile Phone Professional IP Modification Solution Steps:

The best thing to use now is rabbits. Domestic. Dynamic. ip。Software.

National dynamic IP, static IP, one-click IP change, support emulator multi-window multi-open mode I use now the best use.

2.Install it all on your computer phone.