It s been rebooted a few times, or is it like this?

Have you changed anything recently, such as drivers, or installed any software?

1. Restart the computer, press F8, and the selection menu will appear.

2. Select the last correct configuration, try the security mode, and if you can enter the security mode, you can uninstall the recently installed software or driver.

3. If you can enter safe mode, you can fix the blue screen through PC Manager.

1. Click to open the computer manager computer clinic.

Fourth, if this is still the case, you can only redo the system.

The system files are lost or damaged, and the system needs to be reinstalled to solve the problem, win10 often occurs in this situation, and the system is not very stable.

Unplug a memory module and try again.

Reboot a few times and it will be good, what do you mean?

Hello dear! It will be good to restart a few times, which means: 1. The CPU or other hardware temperature is too high, and the memory and graphics card are incompatible or faulty.

The CPU fan does not dissipate enough heat so it will make the computer restart automatically, 2. Power failure and voltage instability can also cause automatic restart. 3. Incompatible drivers can also lead to restarts. 4. Failure of motherboard parts.

Go to the Device Manager and check if there are any conflicting places with the various drivers, and if there are any yellow ones! If there is a possibility that the device driver is incompatible with the system; Then delete the drivers of the sound card, graphics card, network card and other devices, and then install the drivers one by one, restart the computer every time you install a device, to check which device's driver is caused by the imitation of the program, after finding out, the new version of the driver of the faulty device is taken, and then you can install it. Then clean the dust in the computer, clean the memory, graphics card and other equipment, and reinstall the memory and other equipment

Hello dear! The above is my answer to this question, if you think I am very satisfied, please follow me for a one-on-one consultation in the future, and then please do it a little manually, give me a thumbs up! Welcome to consult again!

Graphics card memory These removal and plastering will solve most of the problems, and reinstalling the system will solve the rest.

That's a problem inside the phone, even if it is returned to the factory, it can't be repaired, and I've had such a personal experience, so it's recommended to buy a new one. Because the money for repairing is also in vain.

It is recommended to contact the after-sales service testing center to see.

It means that there is a certain fault in this thing.

There is no need to ask such a simple question, there is no point, you just follow the prompts, it should be that your phone has not completed the upgrade and exited, you can upgrade the phone, and then restart it. Or a factory reset will also solve the problem.

This means that the phone has been factory reset and the system has been turned on again. If you don't take the initiative to click Recover, that is, your phone is long pressed the shutdown button, or the phone system is faulty, click Next to connect to wifi and log in to your account.

If it's like this every time, it means that the phone system is broken, send it for repair, set up-more settings-restore factory settings-reset all settingsvivo phone in the mobile phone shutdown state at the same time press and hold the volume up button and the power button for 3 to 4 secondsAfter the phone appears vivo phone logo, let go of the button to enter recovery mode, first select wipe data factory reset, and select wipe cache partition after completing the waiting interface jump, Once done, select Reboot System Now and reboot your phone right away.

You haven't made your question clear?

Causes of computer malfunctions:

1. The operating system file is corrupted.

2. The MBR meter is damaged.

3. The hard disk data cable is loose.

4. The hard disk is broken.

Solution: 1. Reinstall the operating system. Refer to the base installation tutorial 2 of the system, boot with a USB flash drive or CD, enter the PE system, and repair the MBR table with partition software (some software is called repair boot).

3. Check the hard disk data cable and power cable, plug in the connector tightly, and replace it with a new one if the cable is broken.

4. If you can recognize the hard disk in the BIOS, try to reinstall the system, if you can't reinstall it, try to repartition the hard disk, if you can't divide the area, try to format the hard disk at a low level. I can't recognize the hard drive in the BIOS, so I can only replace it with a new hard drive.

5. Turn on the computer and press F8 to find the last correct configuration.

Enter the motherboard settings interface, change the first boot item to hard disk boot to try, and then reinstall the system.

1. You accidentally or intentionally deleted some important system files;

2. The file is damaged or destroyed by virus or malware;

3. Inappropriate BIOS simulation, etc., resulting in inability to access the desktop environment;

4. Incorrect reinstallation system or C-disk system collapse.

Solution: 1. Turn on the computer, keep pressing the del key or F2 key or F12 key, and enter the CMOS setting for the purpose;

2. Switch to Advanced BIOS, set the First Boot Device to CDROM, different machine settings are different, of course, some can be directly selected through the DEL key;

3. Insert the system disk recovery disc! Start the computer;

4. After displaying the installation interface of the CD, click Repair Computer;

5. In the dialog box that comes out again, click Auto Repair;

6. After the repair is completed, take out the disc;

7. Restart the computer to see if the problem is solved.

It is recommended to go to a computer repair shop to find a professional to check the system software for you, it should be the hardware is broken, it is recommended to upgrade and replace it.