In the case of 4 laptops with only wireless network cards, can you set up a LAN to play Warcraft?

You don't have to buy routing, you can do it with software, but as far as I know, you have to buy this kind of software.

Of course, wireless routing is very simple, TP-Link WR541G+ wireless broadband router (54M), as long as 145, the effect is good, 4 people, more than 30 people get it, set up according to the manual, very detailed!

You can buy a router or switch to achieve it, and the LAN connection to Warcraft, which is how we used to do it

You can buy a router, you know to search for it.

Choose one as the host, the other is connected to the host through the wireless network card, this is more troublesome, and the host must be on, it is recommended to buy a wireless router, buy it back and set the basic settings of the wireless parameters inside, and connect it with the computer.

Make a wireless router, two machines are connected to this router to form a LAN!

You can go and make a twisted pair cable and connect it directly to 2 computers and you can play.

Buy a router and you're good to go.

1. Laptop A (the computer that connects ADSL with an Ethernet card).

The first wireless network card to start, the general notebook is FN+F5, and then enter the network connection and set up the wireless network. In Wi-Fi, right-click, tap Properties, then go to Internet Protocol, right-click and then tap Properties. As shown in the figure below.

Select the IP range, what is written here, in fact, you can write it casually. The subnet mask below is your own default. Click OK after the settings are complete.

Now click on the wireless network configuration of the wireless network connection, select the check box for window configuration, and then click Add under the preferred network to set up a peer-to-peer server.

After clicking Add, the following dialog window will appear, please set your network name, and password, and other settings are the same as below. This is the ATOM. Click OK when you're done.

2. For laptop b

Just set its IP and subnet mask. It must be in the same IP range as A, e.g. between 2 and 255). Be careful not to set the same IP as A.

3. WiFi connection.

For Laptop A. Now double-click on the network connection, Wi-Fi connection, and the currently available Wi-Fi will appear. Now select the network you just set up and click on Connections below. As shown in the figure below.

After connecting, the small wireless icon below will show that it has been connected.

At this point, two laptops are now possible, file sharing, and activities like LAN gaming.

OK. Wireless LAN.

My Computer - Right Click - Properties - Computer Name - Advanced - Look at the workgroup if it is mshome or my group, change the other one's to the same.

In this way, one builds the host, and the other can be seen. I really can't get into the Haofang connection, the speed is as fast.

1.Check win's built-in firewall, the most important thing is that the moment you start the game, win can't jump out to block it.

2.Check the version. It can't be the same installation file (this is the case with Warcraft that has not been cracked), if it is, go online to find a solution (patch pack).

3.Warcraft is shared by IPX and UDP protocols, and it is best to install both (a common problem with XP systems).

Unified (this problem often occurs when two units choose to automatically match), for example, set the IP to Ignore the gateway and leave the subnet mask alone.

5.Check your firewalls, some of which prevent them from actively accessing your computer.

It's likely that the network speed is unstable, and you say that you can see that the host is actually connected. Or you try turning off the firewall and hopefully solve the problem. Or try using another host.

If you want to build a LAN on the original basis, you must first add a network device - a switch or small router. How to set up the router, there is a manual with the router, and you can set it according to the manual.

The benefits of building a LAN are obvious. This can be compared from the difference between a LAN and a WAN.

The Wide Area Network (WAN), which is commonly referred to as the Internet, is a network that spreads all over the world. As opposed to the wide area network, the local area network (LAN) mainly refers to the computer interconnection network in a small area. This "small area" can be a family, a small community, a school, .......

Each computer (or other network equipment) on the WAN has one or more WAN IP addresses, and the WAN IP addresses can only be applied for after paying the fee at the ISP, and the WAN IP addresses cannot be duplicated; Each computer (or other network device) on the LAN has one or more LAN IP addresses, and the LAN IP addresses are assigned within the LAN, and the IP addresses of different LANs can be duplicated and will not affect each other.

Connect it directly with a network cable, and then set up the IP, the host uses, then the other one can be used, the main thing is to turn off the firewall 360 of the two machines.

Two points to note:

1.Make sure your version of Warcraft is the same. Let's say that the sum is two versions, and it is completely impossible to see.

2.Once you're connected wirelessly, you take a look at your IP address. Go to cmd and run ipconfig to see it.

Then you all ping the host to see if you can ping it. If you get through, it's OK, if you don't, the connection will fail.

If it fails, manually configure the IP address, just like wired, in the same network segment. Then the default gateway you all point to the host.

X is better not to be 1, because it is reserved.

Subnet mask: Default gateway: Let's change x to 1 2 3 4 whatever, so it doesn't work, so you can only say that you can reinstall the system or copy the same person's Warcraft to try.。。。 We've been playing like this for three or four years.

Do you mean three people with a LAN and play together (is it online, or are the three of you not playing online???

In college, I used four or five computers to play Dota together

Win7 is very simple.

It's not auto-get, it's the "use the address below" that automatically fetches the following

Any one is this.

Mask: (You can come out yourself without setting it up).

Gateway: is the point A is the number of different people A must be different ) You don't have to forget to set up a LAN by one person first!! It's as simple as that, of course, the machine that establishes the LAN is well configured, otherwise it is easy to fall off suddenly, you try, whose computer is the most suitable for the host!

Whether you set up a wireless network using a wireless router or a wireless network built with a laptop.

The former can automatically assign IPs, and you can play the game.

The latter is estimated to be no, and the IP needs to be set manually.

It is recommended to purchase a wireless router.

The machine that can't be connected is too far away from the router, so bring the computer closer.

I know what you mean, can you connect to wifi but can't see the room. This is the problem of being too far away from the route. We are like this when we even have cs, we can connect to wifi but there is no room, but it is too far away from the router.

Use the wireless network to set up a host first, and the other 2 people go to check the network neighbors on their computers to see if the 3 people are on the same line. If you can't see it, you can re-establish a local area network, and then you can play. Once I played LAN with 2 pot friends, 2 of them were laptops and mine was desktops.

As a result, we can't see the host built by a notebook.,Later, I found out that it was a version problem.,It's good after reinstalling Warcraft.,There's still a difference.,Can't play If it really doesn't work, let 2 people reinstall Warcraft.,Let the third person pass the compressed package.。

In the case of consistent Warcraft versions.

First, check that the wireless connection is correct, including whether it is in the same wireless network, and whether the wireless settings are created correctly. It is recommended to use Intel Proset.

Then pay attention to turn off the firewall (if the antivirus software has a similar function, it is also recommended to turn it off).

I'm having this problem too... When my XP even builds a wireless signal of Win7, no one else drops. . . I'm naked.

I don't know what's going on... After the lz problem is solved. Can you tell me about it?

Thanks!

If you use Wi-Fi, you must unplug the network cable.

The person who built the host turned off the Windows firewall, and the others entered the LAN, and they will be able to see it in a while! There is a delay, some people see it immediately, and some people have to wait.

1. Whether your version of Warcraft is consistent, get a converter to convert the version uniformly.

2. Whether the unlimited use of this machine as the host is normal.

3. IP code and firewall problems. I don't know if you're turning off a firewall like 360 or the win7 firewall in the layout.

Sometimes, if you change the IP to auto-acquisition, you can't join the game, or change the IP to a similar one. Sometimes it doesn't work out because of the version. Give them a try.

If the version of Warcraft on the machine is not right, it will not work. It is recommended to use Haofang, QQ and other battle platforms. It is also possible that the wireless LAN is unstable. Kneel and beg for extra points!

I've had this happen to me before:

1.I don't know what system you're using, if the XP or higher system will prompt you to allow the app to run over a public network or a private network when you enter the game. I think that's the approximate meaning.

Especially when you enter for the first time, you have to choose, otherwise it won't appear in the future. Once you're logged into the game, the window button will pop up and you'll see a pop-up window.

2.Antivirus software blocked War3's network operation. In the same case as 1, the user's consent is required.

Of course, there may be other reasons, but these two should be the most likely problems, and I hope they can help you.

Your game may not be the same version, so the next version converter will be converted to the same version.

I also have this problem sometimes、I have to turn on the Wi-Fi、Or just connect it all to the route.。