When the computer is on, will the computer be broken when the monitor is turned off?

There are pros and cons. First of all, saving electricity is the biggest benefit. However, it is not good for your computer hardware to do this, when you switch the monitor on and off, the monitor will have an instantaneous high voltage input to the computer host through the signal line of the monitor, and the graphics card may be burned, and I have two customers who changed the graphics card because of this.

But you don't have to worry too much, this kind of thing doesn't happen often, it depends on your luck, hehe.

The moment the monitor is turned off and turned on, there will be a strong current transmitted to the motherboard through the wires, which will have a great impact on the life of the CPU and motherboard chips, so you must turn on the monitor before turning on the computer host, and the same reason, you turn on the main monitor every day will have a bad impact on the host. It is recommended that you turn off your console every two days.

It has some impact on the hard disk, which may lead to overheating due to long-term work, shortening the life of the hard disk.

It's best to turn off the computer main. This will give the computer a break, free up memory space, save power, and if a computer hacker is busy working on your computer, he will also be shut down by you.

There's no harm, just remember to turn off the main computer when you get up in the morning to save electricity, and, adsl is 48 hours automatic disconnection, if you hang up online games, remember to redial.

That's good, it can save power, and it can also save the display.

No, large servers are only run by the host, the monitor is turned off, and it will only be turned on during maintenance.

Nothing harmful?! If your computer doesn't move for a long time, it will automatically turn off the monitor in order to save power.

You say there's no harm.

The only downside is to save yourself money haha.

Who's to say it doesn't hurt.

The host is left open for a long time, which is a fatal harm to the host.

That's short-lived.

It's not going to be bad, it's relatively environmentally friendly, and it's power-saving.

Honestly, it doesn't hurt. But since you sleep at night and don't need a computer, why do you have to turn on the main monitor? Forget about the console as well!!

When playing online games and hanging up, ADSL is automatically disconnected for 48 hours, and it is best to use a router.

Disconnection will be automatically redialed.

I don't think so, if the computer sucks, there's no way to do it.

I've been like this all the time, and I don't necessarily have a bad computer.../.

There is a downside. That's deadly! 1. It's that someone doesn't know that the computer is on, and when they see that your monitor is black, they press the power button and want to turn it on, but they turn off your computer

No. Isn't that what some servers are?

Summary. It will have an effect, and the display will generate high voltage when it is turned off or on, which will cause damage to the electronic components on the motherboard in the host. It can even break down electronic components. It is recommended to set the power saving mode:

How to set the power saving mode of the computer is as follows: (1) Select "POWER" in the main interface of BIOS settings

management

Setup option and press the [Enter] key to enter the settings interface. (2) Select "power" in the interface

management" option and press the [Enter] key, and use the up and down arrow keys to set the option in the pop-up interface. (3) After the settings are completed, save and exit the BIOS settings.

Will it affect if you turn off the computer monitor and then press the console again?

It will have an effect, and the display will generate high voltage when it is turned off or on, which will cause damage to the electronic components on the motherboard in the host. It can even break down electronic components. It is recommended to set the power saving mode:

How to set the power saving mode of the computer is as follows: (1) Select the "PowerManagementSetup" option in the main interface of BIOS settings and press the [Enter] key to enter the settings interface. (2) Select the "PowerManagement" option in the interface and press the [Enter] key, and use the up and down arrow keys to set the option in the pop-up interface.

(3) After the settings are completed, save and exit the BIOS settings.

What should I do if my computer won't turn on now?

Is there anything you can do to solve it?

Confirm the power supply AConfirm that the power cord is connected and the socket is plugged in as shown in the figure below. If there is a main power switch on the extension cord, make sure it is on. If it still doesn't turn on, you can try replacing the extension cord and socket.

Make sure the power switch on the back of the power supply** is turned on, and confirm that the ATX power connector plugged into the motherboard is plugged in correctly. Some motherboards may contain 8-pin eatx12v 1, 4-pin eatx12v 2 and 24-pin eatxpwr, in order for the motherboard to provide better stability, it is recommended that all three ports be connected to the power supply ** (the model below** is Prime Z490M-Plus)DTry replacing a known healthy power supply**.

2. Confirm cpu1Make sure the CPU and motherboard are compatible. b.

If the display cable is connected to the onboard display output, please go to the official website of the CPU manufacturer Intel or AMD to confirm whether the CPU you installed supports the onboard display output CIf you confirm that the CPU supports the onboard display output, but it still does not display when you boot up, try reinstalling the CPU and check if the CPU pin or CPU slot is dirty as shown below. If so, clear it and try again.

If the desktop monitor is broken, will it affect the boot of the host? Hello, happy to answer your <>. The quality of the pro-monitor does not affect the boot of the computer.

Even if you use a good case and a big-headed, worn-out CRT monitor, it should be smooth when playing big games. It's just that under the same configuration, a good monitor shows a better effect. There is no correlation between the computer's display and the computer's responsiveness and performance.

There are many reasons why the computer can't turn on, except for the optical drive, any hardware will cause the computer to not turn on. If the computer can't be turned on, there is no screen on the monitor, or there is no signal, no signal. If there are a lot of English letters on the computer, it may be a system or hard disk problem, and most of them are caused by the system.

Self-check and solution for desktop computer failure that cannot be turned on: 1. If the host is not powered on, first check whether the indicator light on the chassis is on, put your hand on the power supply fan port, and see if the power supply fan is rotating, so as to judge whether the host is powered on; If the host is powered on normally, then see if the indicator light on the display is on, if it is on, the display is also normal when it is powered on, and both are normal, then the power supply fault is basically eliminated. 2. If the computer host or monitor is not powered on properly, please check that the power socket of the computer is in good contact, whether the power cord is broken, and whether the power strip is energized.

If it is not caused by the above problems, it may be a problem with the host, and you can ask professional maintenance personnel to repair it at this time. You can unplug it and check if there is bending, broken needle, and a lot of dirt in the D-shaped socket, which is a problem that many users often encounter. When connecting the D-shaped socket, due to uneven force, or forgetting to tighten the socket fixing screw, the socket is not in good contact, or due to improper installation method, the needle in the D-socket is broken or bent, resulting in poor contact, etc.

3. Open the side cover of the main chassis, check whether the CPU radiator fan and the power supply fan are running, if the fan is not running, then you can basically know the reason, either the motherboard or the power supply problem (if the indicator light on the motherboard is not on, it is a power supply problem). 4. If the CPU radiator fan and power supply fan are running, after shutting down, then we unplug the memory, use the eraser to erase the memory gold finger, change the memory slot and plug it in again. 5. If there are two memory, it is recommended that you unplug one memory and try to boot it up, if it can't be turned on, replace it with another (single) memory plug in, in case one memory is broken and the computer can't be turned on.

6. You can try to discharge the button battery on the motherboard (unplug the button battery and install it again), and then try to turn it on. If the computer has an integrated graphics card + a discrete graphics card computer host, most of the current computers are dual graphics cards, use a screwdriver to remove the discrete graphics card, connect the monitor cable to the integrated graphics card interface on the motherboard to try, if the computer can be turned on, it means that the discrete graphics card is broken. Hope mine.