Where is there a complete tutorial for MCU, where is there a website to learn MCU?

There are too many types of single-chip microcomputer, so it depends on your use Whether to carry out complex operations, if a large number of floating-point operations, the running speed and internal RAM requirements of the single-chip microcomputer are relatively high, choose 1T 51 single-chip microcomputer or even 16-bit or 32-bit single-chip microcomputer If there are more peripherals, choose a single-chip microcomputer with more pins, such as 8051F series 64 pins and 10 pins, if you want to have a richer interface, STM32 is very suitable, rich interfaces, and there are 10 pins and 14 pins If it's just a simple control and measurement, many 8-bit single-chip microcomputers can be, **cheap In addition, it depends on what kind of single-chip microcomputer you or your team are familiar with, after all, different single-chip microcomputers have different internal structures, and the development environment is also different

Go to Bei Yite Electronics to find it, there are a few good tutorials in it, in the forum, hehe, I hope it will be useful to you.

MATLAB Chinese Forum; csdn；TungkoMCU Learning Network; ourdev and so on.

Introduction: Single-chip microcomputer is referred to as single-chip microcomputer, which is a typical embedded microcontroller (microcontroller unit), and the abbreviation MCU of the commonly used English letters means single-chip microcomputer. Single-chip microcomputer, also known as single-chip microcontroller, is not a chip that completes a certain logic function, but a computer system.

Integrated on a single chip.

The microcontroller consists of a combinator.

Controller, memory round.

The input and output devices are equivalent to a miniature computer (the smallest system), and compared with a computer, a microcontroller lacks peripherals.

In a nutshell: a chip becomes a computer. It is small in size, light in weight and cheap, which provides convenient conditions for learning, application and development.

At the same time, learning to use a microcontroller is the best choice to understand the principles and structure of computers. It was first used in the old domain of industrial control slip and spur system.

Due to the wide application of single-chip microcomputer in the field of industrial control, single-chip microcomputer is developed from a dedicated processor chip with only CPU. The earliest design ideas.

By integrating a large number of peripherals and CPUs into a single chip, the computer system is smaller and easier to integrate into complex and size-critical control devices.

Choose the appropriate development board to learn the MCU, through the development board you can learn the design and programming of related programs in the peripheral circuit of the MCU.

I'll give you a brief description of how to learn monolithic du

The process of the machine: the first.

First, based on zhi51 single-chip microcomputer

Self-study, the fastest speed is to use the ready-made learning board, take other people's programs, test, understand, in the writing of their own **, to achieve the desired results, Intertek Electronics' learning board is OK, ** is also reasonable, learning from 51 is easier to get started, master a class in the study of other classes.

MCU Introductory Learning Course, Lesson 15 Principle and Application of Stepper Motor, in this course, the 28BYJ-48 stepper motor is used as a representative to explain the driving principle and use method of the stepper motor, so as to support the relevant knowledge of the stepper motor.