I bought a second hand printer on the Internet, but I didn t want it immediately, what should I do?

Note 1: Consumables.

For example, some units once bought a color laser printer (1900 yuan), and when the consumables ran out, they went to buy the consumables, only to find that a set of consumables was more expensive than the machine they bought (2400 yuan). Buying a second-hand phone is originally to save money, so don't ignore the problem of consumables, since you want to buy, of course, you must first ask whether the cost of consumables is high.

Note 2: Just look at the appearance.

Buy a used phone and don't be fooled by a beautiful and clean appearance. A machine will definitely have different degrees of aging or worn-out after a few years. But as long as the printing effect is good, there is not much of a problem.

It is very likely that it has undergone artificial renovation and overhaul, and in order to sell the problem product, you can only work the appearance to attract consumers to buy.

Note 3: Remember to test.

Be sure to test it yourself, don't just look at the test page the seller gives you. Make dozens of more sheets by yourself, and print dozens of sheets continuously to see if there are any problems such as paper jams. Because now few sellers dare to sell machines with particularly serious problems, there may be some minor problems that need to be continuously printed for testing.

It's like buying a car, you can't just see if you can start the fire, at least you have to drive a few miles to try it.

When it comes to the word "second-hand", some people disdain, some people are contemptuous, some people are angry, and of course there are people who appreciate it, and in general there is a lot of controversy. Second-hand is also favored by many people because of its high cost performance, and second-hand has always occupied a certain market, including major e-commerce platforms have second-hand columns, such as Jingdong second-hand. Why are there second-hand products?

The vast majority of products generally have a service life of at least 3 years, but because of various reasons, and because of the rapid replacement of products, the vast majority of products are basically eliminated after only one year of use, and even some products have just flowed into the second-hand market. Used printers are no exception, with less than half the size of new.

What are some tips for buying a used printer?

1.The choice of model, the purchase of second-hand printers to choose the best-selling models on the market, such models are generally not used for a long time, and accessories are easy to buy.

2.The choice of color, choose a printer with a newer color, it can generally be seen from the appearance, the general color of the newer printer, the amount of use will not be very large, and it can also show that the original owner of the printer is also a more cherished person, and there will generally be no problem with buying such a machine.

3.Warranty, generally speaking, second-hand printers generally have a 1 to 6 month warranty, whether the purchase of the machine provides toner cartridges, print drivers, print lines, etc. Although it is a second-hand printer, the accessories required for the machine still need to be understood, do not only pay attention to the ** and ignore the accessories, resulting in the situation that the machine is bought back but cannot be used.

4.Purchase platform,At present, there are Xianyu and Jingdong second-hand products,Xianyu is person-to-person,Too much cats,Try to choose face-to-face to meet transactions,If there is a problem, you can also find it in time to avoid losses; Most of the second-hand products of Jingdong are self-operated, and Jingdong's services are obvious to everyone and are relatively reliable.

There are so many precautions for buying a printer, and you can go to Jingdong second-hand to ask the merchant for specific matters.

Second-hand dot matrix printers are recommended to buy big-name machines, such as Epson, OKI, Nantian, etc. Because the quality of the machines of the big brands is relatively good, the accessories are easy to buy, especially the machine accessories of Epson, which are very easy to buy.

If you are making an express order, it is recommended: Epson LQ-630K, Epson LQ-680K, Nantian PR2E and PR2.

The Epson LQ-630K is a relatively new low-end dot matrix printer because it hasn't been on the market for a long time. There are not many second-hand machines, and the condition is relatively new, so ** is generally around 800 yuan. This machine uses a large ribbon and the cost of use is low.

Epson LQ-680K This machine is Epson's relatively high-end flat push needle, although it has been on the market for many years, because of its excellent performance and low failure rate. It is more common in the market, but it is slightly more expensive second-hand 9 into a new printhead of about 700 1000 yuan.

Nantian pr2 and pr2e this machine is a common bank passbook printer, because it is a professional market, so the new machine is very expensive, but because the bank for the reliability of printing generally use 1 3 years after the machine will be updated, in the second-hand market a lot. Generally** is between 500 780 yuan. The cost performance of this machine is very good, if you choose a better print head, there is no problem with 3 to 5 years.

The most important thing to buy second-hand needle punching is the print head of the machine, if the print head is good, the machine will take a long time. The option is to type a file and listen to the sound of printing, if the sound is even loud and loud. The head is better.

There is also a need to see if the punch is deep and light, if so, it means that there is a problem with the needle. Not good!

Dot matrix printers** are inexpensive and have low consumables. Since it is second-hand, it depends on how long the other party has used it, and it should not be very expensive. Just print the courier single use, can be used live. If the print volume is large, the ribbon should be changed frequently, and the ribbon is about 15 yuan.

I have an Epson 300k used printer, it's useless now, do you want it? Send me a message if you want!

To play the express list, you have to use a flat push, like Epson670K NX500, it is no problem to use it for a year or two, and the second-hand one is generally between 700-900, for reference only.

You can consider the Epson 300k 630k 635k If you are lucky enough to buy it, you will generally not have any problems.

It is recommended not to buy a second-hand one, the maintenance cost is too high, it is better to buy a new **The service is reasonable.