What is the performance of PE filter bags? What does filter bag PE 5 mean

Polyester filter bag (PE filter bag) is made of polyester fiber filter cloth, pure fiber is made of needle punching, forming a three-dimensional, highly fluffy three-dimensional depth, tortuous filter layer. It is characterized by loose fibrous tissue, which increases the capacity of impurities; The product is a compound interception mode, which effectively removes solid and soft particles, that is, larger particles and impurities are trapped on the surface of the fiber, and fine particles are caught in the deep layer of the filter material to ensure that they will not be damaged due to increased pressure during use, and have high filtration efficiency.

Summary. Your question "what does filter bag pe-5 mean" will be up to me for you.

What does filter bag PE-5 mean.

Your question "what does filter bag pe-5 mean" will be up to me for you.

It is made of polyester fiber filter cloth, PP filter bag is made of polypropylene fiber filter cloth, PE, PP is a deep three-dimensional filter material, 100% pure fiber is made by needle punching, forming a three-dimensional, highly fluffy three-dimensional depth, tortuous filter layer. It is characterized by loose fibrous tissue, which increases the capacity of impurities; This product is a duplex interception mode.

Filters, Filters, Filter Bags, Cartridges, Single Bag Filters, Multi-Bag Filters, Polypropylene Filter Rulers, Stainless Steel Bag Filters, Cartridge Filters, Eaton Filter Bags, 3M Filter Bags, FSI Liquid Filter Bags, Nylon Filters.

Eaton Filtration Products, WIKA Pressure Gauges, Rexroth Rexroth Magnifying Plates, KTR Couplings, Seven Star Fittings, Imported from USA.

Summary. What does filter bag PE-5 mean.

Hello dear, it is on behalf of the thickness of the plastic bag, depending on what product you are packing, if it is a heavy product, it is recommended to use PE-05C, if you use a slightly thinner one, use PE-04C, I hope it can help you.

What does filter bag PE-5 mean.

What does the filter bag PE-5 mean, hello dear, it represents the thickness of the plastic bag, Jane guess, depending on what product you are loading Liang Min, if it is a heavy product, it is recommended to use PE-05C, if you use a slightly thinner one, use PE-04C, I hope you can help you with acorn branches.

How to distinguish how many mesh of filter bags.

The number of meshes refers to the number of holes within 1 inch of the filter cloth, and the test instrument generally uses a scattered eyepiece. Generally, there is a comparison table. How many meshes are needed, just tell the manufacturer directly, and wash it out. Hope it helps.

Hello dear, could you please describe your specific problem? In this way, we can provide you with a better answer. I'm sorry.

What does PE-5-P04S-403 mean in this picture?

Filter bag labels.

Represents the thickness of the plastic bag. Hope it helps. If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the motivation for my slow progress.

Finally, I wish you good health and a happy mood!

As a filter element, the filter bag is a key part of the filtration process, and the quality of the filter bag determines the filtration effect to a large extent.

Filter bag materials are: nylon, polypropylene, polyester, stainless steel, PTFE, etc. The size is divided according to the filter: No. 2 bag, No. 1 bag, No. 5 bag, No. 4 bag, No. 3 bag (from large to small).

PE: Polyethylene Characteristics (molding):

1.Crystalline material, small moisture absorption, do not need to be fully dried, excellent fluidity is sensitive to pressure, it is advisable to use high-pressure injection when molding, the material temperature is uniform, the filling speed is fast, and the pressure holding is sufficient. Direct gate should not be used to prevent uneven shrinkage and increased internal stress.

Pay attention to the location of the gate to prevent porosity and deformation.

2.The shrinkage range and shrinkage value are large, the directionality is obvious, and it is easy to deform and warp. The cooling rate should be slow, and the mold should be equipped with a cold material cavity and a cooling system.

3.The heating time should not be too long, otherwise decomposition will occur.

4.When soft plastic parts have shallow side grooves, they can be forcibly demolded.

5.Melt rupture may occur and should not be in contact with organic solvents to prevent cracking.

PP: Polypropylene Properties (Molding):

1.The crystalline material has low hygroscopicity, is prone to melt rupture, and is easy to decompose in long-term contact with hot metals.

2.The fluidity is good, but the shrinkage range and shrinkage value are large, and it is easy to shrink holes. Dents, deformations.

3.The cooling speed is fast, the pouring system and cooling system should dissipate heat slowly, and pay attention to controlling the molding temperature. When the material temperature is low and high pressure, it is easy to orient, and when the mold temperature is lower than 50 degrees, the plastic parts are not smooth, and it is easy to produce poor welding, flow marks, and warping deformation above 90 degrees.

4.The thickness of the plastic wall must be uniform, to avoid lack of glue, sharp corners, to prevent stress concentration.

"Nowhere to Find in a Dream": Where does Yue'er go to the clouds? Forget to return, don't say spring is about to twilight. Thousands of grasses and flowers are cold and food roads, and the incense car is tied to whose tree. Tearful eyes leaning on the building can be a monologue, when Shuangyan comes, do you meet on the Mo? The turmoil of spring sorrow is like catkins, and there is nowhere to be found in a dream.

The surface is treated with special singeing, which can effectively prevent the fiber from falling off and polluting the filtrate, the fluffy and uniform three-dimensional filter layer has a very high ability to capture solid and colloidal particles, and the high-strength long fiber makes the filter bag have stable filtration efficiency and longer service life.

1. Size and specifications:

Material: polypropylene (PP), polyester (PE) Ring mouth: stainless steel, galvanized, nylon, PP, PE

Process: sewing, hot melt welding precision.

Size: 1 (180*420mm) 2 (180*810mm).

#(φ105*230mm) 4#(φ105*380mm)

(150*520mm) Y series (202*330mm) and other non-standard sizes.

What kind of material is PP? Do you know what is the difference between PE and PP.

Polypropylene, abbreviated as PP, is a thermoplastic resin made by polymerization of propylene. There are three configurations: iso-gauge, unregulated and inter-regulated, and industrial products are mainly composed of iso-gauge substances. Polypropylene also includes copolymers of propylene with a small amount of ethylene.

It is usually a translucent colorless solid, odorless and non-toxic. Due to the regular structure and high crystallization, the melting point is as high as 167, heat resistance, and the products can be sterilized by steam is its outstanding advantage. density, which is the lightest general-purpose plastic.

Corrosion resistance, tensile strength 30MPa, strength, rigidity and transparency are better than polyethylene. The disadvantage is that the low temperature impact resistance is poor, and it is easy to age, but it can be overcome by modification and adding antioxidants.

Features: non-toxic, tasteless, low density, strength, stiffness, hardness and heat resistance are better than low-pressure polyethylene, can be used at about 100 degrees. It has good electrical properties and high-frequency insulation, which is not affected by humidity, but becomes brittle, wear-resistant, and easy to age at low temperatures.

It is suitable for making general mechanical parts, corrosion-resistant parts and insulating parts. Common acids and alkali organic solvents have little effect on it and can be used in tableware.

Molding characteristics: 1Crystalline material, low hygroscopicity, easy to melt rupture, long-term contact with hot metal easy to decompose.

2.The fluidity is good, but the shrinkage range and shrinkage value are large, and it is easy to shrink holes, dents, and deformations.

3.The cooling speed is fast, the gating system and the cooling system should dissipate heat slowly, and pay attention to control the molding temperature, the material temperature is easy to be oriented at low temperature and high pressure, and when the mold temperature is lower than 50 °C, the plastic parts are not smooth, easy to produce poor welding, flow marks, and warping deformation is easy to occur above 90 °C.

4.The thickness of the plastic wall should be uniform to avoid lack of material and sharp corners to prevent stress concentration.

PE and PP are two different materials; PE polyester fiber has good performance at room temperature and is the main filter material in the bag filter. Can withstand 130 °C operating temperature in dry conditions; Working above 130 continuously will harden; Fade; Brittle, the temperature also weakens its strength. Accuracy range:

1--300 microns. PP polypropylene has good abrasion resistance and high elastic recovery rate, and is an excellent thermoplastic fiber, polypropylene accuracy range: micron, maximum temperature 94 degrees.

PE is milky white before dyeing, opaque, hard, not easy to extend, burning with paraffin smell, the flame burned out is low blue and yellow, and the tail smoke should be a little thicker. PP is white, translucent, and has a petroleum smell when burned.

Cut out a small piece of the filter cloth and burn it.

After combustion, the material is clear and transparent, and the blackened substance is PE.