Learn the masters of hardware assembly and repair to come to 50

Learning to assemble is nothing, as long as you know how not to damage the equipment, and then install carefully, computer assembly is no different from assembly line production, there is no technical content.

If you need better electronic technology for maintenance, it is useless to use computer applications!

It is recommended that if you have a choice, 1Concentrate on learning computer software applications, and the hardware only needs to know the basics

2.If you want to take the road of equipment maintenance, hurry up and learn the knowledge of electronics, as well as assembly language, so that you can have a future in the future!

Assembled, hardware: CPUMemory.

Graphics. Hard disk. Drive.

Power supply. The software needs to be set up to boot from the optical drive. Then put the system disk in, divide the area and start installing the system.

After installing the system and installing the driver (most of the system disks now have drivers), the backup is complete and you're done

It is also necessary to know a workflow of the computer, so that you can have a set of ideas when repairing, judge where the problem is, and some parameters of the hardware, such as which and which may form a bottleneck.

If you want to understand some principles, you can try to fix it, experience is very important, of course, the system must be able to install, you should have no problem.

The easiest way to repair is the elimination method, that is, the replacement of parts.

It depends on how you want to learn how to repair it, if you learn to repair hardware, it will be difficult to repair the circuit board, and you need to be professional.

Hello, that's what I learned. In the past, when I was studying, I should have been studying for nearly two months, but I didn't go to school specifically to learn. I have a certain amount of relevant knowledge before learning, all I need is practice!!

So, I personally think that if you have a certain understanding of computer related before, one month is enough. If you just want to learn repair assembly, soon. Assemble it in one day.

If there is a chance to practice, it should be very fast, and one month is enough to encounter most problems. Of course, if you still want to learn steps, network networks, IP and other related things, it is not only a matter of time, but it will take more effort... In general, only learning basic hardware maintenance and assembly, one month is enough.

The premise is full-time study and practice. By the way, all the initial learning is just a primer! Computer-related is never learned to play.,Or learn and absorb from time to time.。。。 Satisfied.

There's no need to study specifically, unless it's because you want to work in the computer repair industry!! Read more books, and run more to the computer city if you have nothing to do! Always help others solve some problems, it's fine!!

Sometimes it's hard to understand these things just by reading books and listening to lectures! But as long as you look at others and practice, you will understand it simply!

Practice is the most important thing. Hehe.

As for those places that learn, they generally can't learn real skills. Oh, there is also an environment where there is work practice. There is no environment.

It's useless to learn. Hehe.

Hehe. If you really want to learn. (meet your conditions), it is recommended to go directly to the tech market as an apprentice..!

Not to mention learning the fastest, you can also get access to the latest hardware configurations. Very practical.

And those training courses are not likely to allow you to move those thousands or even more advanced machines or related configuration hardware! You tell me.. Hehe.

Now that I'm working in this area, I feel that practice is the best teacher. And then there's the fact that computer hardware doesn't exist on its own! You must learn the application of software (system configuration, network configuration, etc.) to learn comprehensively!

I wish you to become a computer master soon. Hehe.

Nationally, it is best to study in Shanghai. But tuition is very expensive, generally speaking, computer repair test is practice, theory is the foundation, practice is the right reason. This is supposed to be a science subject from Shanghai Tongji University.

It's useless to go to the computer city. I went to the computer city, and everyone who bought computers in it looked like two stupid people. I only asked a few simple questions, and I couldn't answer them. It's okay to deceive and deceive those who don't understand, so the first one denied.

If you don't understand the book very well, you can read it in vain, and many questions are difficult to understand, so you have to ask someone who understands.

It should also be noted that there is no future for buying an old computer and playing with it. Even if you are familiar with the demolition, it is useless to dismantle if you don't understand the theoretical knowledge. Because if there is a problem with the computer, if you don't know the theory, it will be difficult to find out what the problem is.

If you want to learn, you have to go to the master and let the master teach you.

Let's take a look at this.

I told you as someone who came over.

...In fact, it still depends on practice, and it is not enough to just read books.

I went to work on the computer, and that's how I practiced.

Buy your own 2-handed computer, disassemble it 2 times, and then dive in the water for a few months on the hardware forum.

Go to Computer City and it for a few days.

Everything is known.

Stay behind the master's PP for a few months, find opportunities to practice by yourself, and maintain communication with the master, you will become a master in less than half a year.

Just go to the computer city for a few days.

It is recommended to intern in the local computer city and read more relevant books and magazines.

First of all, we must understand the relationship between hardware, and then the most important thing is to practice, see more in the computer city, ask more, and it won't take long for you to be a master

Buy a second-hand computer by yourself, and study it slowly by yourself if you have nothing to do

I can't bear to let the child trap the wolf.

Just buy a scrap computer and play for a few days.

Look at your hobbies.,Hobbies should be learned very quickly.,Now the computer assembly cherry crack ant is also getting older and smarter.,Just align the connecting wires.,And then install an operating system.。

As long as you have the heart, learn quickly.

Hehe, I only got one right, it's still upstairs high, it seems that I'm out, and I choose 1 for the second question

...Damn...Not yet divided...Count me as a good thing.

There are people like you.

I'll go to the computer city to install a computer first.

You'll know when you install it.

Let's go to the computer city to be a technician first! I don't know how successful you are talking about? Do you want to start your own company and go public?