How does the plank bed prevent insects? What are the ways to prevent insects in wooden beds?

Don't worry, I'm here

1 Paint treatment For some corners that have not been damaged, paint with tung oil, shellac paint or varnish and brush to the surface of the wooden cabinet, which can isolate the moth from the air and achieve the purpose of moth-proofing. It should be noted that when painting, the front and back sides and the inner wall of the wooden cabinet should be evenly painted.

2 Pharmacy treatment When the wooden cabinet is infested by insects, dichlorvos and water can be used to prepare the liquid medicine in the ratio of 1 5, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.

3 Wipe with diesel On a sunny day, place the wooden cabinet that has been eaten by insects in the sunny place, and paint all the wooden cabinets with a brush or cotton yarn dipped in diesel fuel once. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.

&As long as it's wood! It is recommended to use 2 methods to spray with a pesticide pot and pay attention to anti-virus!

Dry the wood floor with insect repellent powder, keep the planks clean and dry.

As long as it is kept dry, the person will generally not grow worms when using it, and if you don't sleep after a few days, you can spray some insecticide under the bed after leaving.

Keep it dry, clean, and that's it.

Although the beds come in a variety of shapes, the basic material is the slats made of wood. Sometimes there will be small holes in the plank bed, so be careful if there are woodworms in it. This kind of moth will gnaw at the board, gnaw the board out of the powder, and over time will affect the quality of the bed board, and even these insects may crawl on the sleeping person.

So how do you get rid of the borers on the wooden bed?

How to get rid of wood borers in a wooden bed

1. For some corners that have not been harmed, paint the surface of the wooden cabinet with tung oil, shellac paint or varnish to isolate moths in the air and achieve the purpose of moth-prevention. Pay attention to the painting, the front and back of the wooden cabinet and the inner wall must be evenly painted.

2. When the wooden cabinet is infested, the original solution of pyrethroid and water can be made into liquid medicine at a ratio of 1:10, and sprayed with a sprayer to let the liquid medicine penetrate into the wooden cabinet. Spray 3 to 5 times in a row.

After 8 hours, all borers can be killed. After that, wash the wooden cabinet with clean water and wipe it dry.

3. On sunny days, put the wooden cabinet that is eaten by the sun insects and paint it once with a brush or cotton gauze dipped in diesel. Expose it to two or three hours and then apply it again until the worm dies in the well. Then wash with laundry detergent liquid and let it dry.

4. Bed bugs are not resistant to high temperatures. You can scald all eggs and adults with boiling water. For bed frames, bed slats, and other utensils that have bed bugs, you can move them outdoors. The cracks reach high temperatures to scald bed bugs and their eggs.

What is the name of the bug inside the plank bed

The insects inside the wooden bed may be common borers, also called silverfish, which is a general term for insects of the family Cydaceae, Cyptoidae, Beetidae, and Beetleidae. The first three types of insects mainly damage wood or live trees, and the insects of the family Cypdiaceae mainly damage the fur and its products. Silverfish are relatively small, and adults are generally 2-3 mm long.

Most overwinter with the larvae in one generation each year and pupate the following spring. Pupae become adults in April and May, and after mating, the adults lay eggs. The egg period is about 15 days before hatching.

The larvae invade wood or fur and are important pests in agriculture and forestry, wood decoration, furniture, wood carving Buddha statues, fur clothing, etc.

How to maintain a plank bed

1. The wooden bed cannot be exposed to direct sunlight, which will reduce the service life of the wooden bed. On a hot summer day, you can close the curtains to block out the sun.

2. When using the electric oven in winter, stay away from the wooden bed, because the wooden bed will be dry, cracked, and deformed when baked at high temperature for a long time.

3. The hardware of the wooden bed should be checked regularly. If it is loose, it should be tightened in time; When cleaning wooden beds, they should not be cleaned with corrosive detergents. For dust on the tracks, it can be cleaned with a vacuum cleaner.

4. If there is a humidifier at home, the wooden bed should be kept away from the humidifier, because excessive humidity will make the wooden bed damp, expanded, deformed and moldy.

1. Drying: This method can solve most of the problems, and the wood used in China can achieve the purpose through this method, but it does not work for special purposes such as sealed packaging, high humidity in the warehouse, and the humid and hot environment at sea when exporting.

2. Fumigation: This method is mainly for insecticide for the export of the first wooden packaging, and the validity period is relatively short. Many friends mistakenly think that it is mildew prevention, but in fact, it has no effect on mold prevention and control at all.

3. Heat treatment: special equipment is required, and the treatment cost is high, which can reduce the moisture content in the wood, but cannot solve the fundamental problem.

4. Anti-corrosion: This method is mainly for outdoor applications of landscape wood or furniture wood treatment, commonly used potion fiber bureau for ACQ and CCA, etc., using vacuum and high pressure to hit the potion into the wood, generally penetrate relatively thick, mainly insecticidal and bactericidal, etc., but its effect on mold is not very good, often see landscape wood mold everywhere.

5. Anti-mildew: use professional wood anti-mildew agent to treat it, you can use rapid soaking or brushing, etc., which is both convenient and cost-saving (generally mixed with water in proportion) "Dry wood is still mildew if it is not mildew-proof, and the wood after mildew prevention is even if it is wet, so that it has a good anti-mildew effect".

Furniture that we usually use, such as wooden tables, wardrobes and beds, will be moth-eaten if they are not completely dried during the production process. The wooden bed that is eaten by insects will make a "squeak" sound and affect our sleep; It will affect the firmness of the wooden bed structure, and even the phenomenon of couch bed. So what are the ways to prevent insects in wooden beds?

1. Newspaper insect prevention method: In order to avoid insects, when the wooden bed is installed, it is recommended that you can take some newspapers and spread it evenly around the bed and on the surface, which can not only effectively absorb the moisture inside the wooden bed, but also play an effective role in repelling insects.

2. Salt water insect control method: we can pour salt into cold boiled water, mix and stir, and then put a rag into the water to soak it, use it to wipe the wooden bed, and wipe it several times, so that it can also have the effect of insect prevention to a certain extent.

3. Mothballs insect control method: We can buy some special mothballs, put a few more, and place them evenly in all corners of the wooden bed, which can play a certain role in repelling insects.

Once the wooden bed is found to be moth-eaten, it is recommended that you deal with it in time so as not to affect the normal use of the bed.

1. Mothballs can be used and placed in the place where moths are moth-eaten, and furniture made of wood such as wardrobes that have not been moth-eaten can be placed to prevent moths.

2. Water immersion method, soak the wooden board in water for a few days, and then dry it to kill the moths.

3. Paint method, use paint to oil the wooden board, and isolate the air to kill moths.

4. Insecticide, find the place where the moth is eaten, clean up the wood powder, and then spray the insecticide on several consecutive branches, and then clean it, and then take it to dry.

5. Direct sun exposure, this method can kill moths, but it is not good for the board, and the board is easy to deform.

1. Use lime powder, wrap the lime powder with gauze, and then put it in the corner of the room, under the bed. Now supermarkets also have special desiccant for sale, and some can also be considered.

2. You can place some mothballs at home, which has a good effect of repelling insects and mildew, but it takes a long time to use it to have a good effect, and the smell is relatively strong.

4. Fumigate the wooden board with insect medicine to remove insects, clean it after insect removal, and then dry it.