How to get two computers online urgent! Urgent! Urgent! ） 5

Buy a network cable (crossover cable) and connect it from the router to the switch in your room, and then the switch to your computer. If the IP address is automatically assigned, it is fine.

It's hard to understand this, so let's hire a professional.

You'll need to buy another router. Make three network cables. One is connected to the route from your landlord, and the other two are connected to 2 machines. Enter the route from IE.

Set it up.

Connect the cable he gave you to the switch, and then take two more wires from the switch to connect your two computers separately.

Also set up IP and DNS servers.

There are some different opinions on the first one above, and I want to say that the second one is wrong, or that it is not necessary.

1: Whether the IP address is automatically assigned depends on whether the route is automatically assigned to the IP address. If it is not enabled, you will not be able to rent an IP.

In short, whether it is turned on or not, you set your own IP to the same IP segment as your landlord (that is, the last number can be changed), the subnet is OK, the gateway should be the same as your IP range, the last is 1, and then the DNS must be set, you go to their machine to run ipconfig all to see what the DNS server is, copy it down and fill it in. The network cable connection is the crystal head tail down, the tail facing itself from left to right, orange white, orange, blue and white, green, green and white, blue, brown white, brown. It's the same at both ends.

2: What do people do when they buy a router when they have a switch? However, routes can also be used as switches. I cannot use the entrance.

This problem is easy to solve. Are you using telecom adsl, if so, the question is too simple.

If you use the starry sky to dial the Internet quickly, it is ADSL. Then I'll teach you how to use Router to surf the Internet.

First of all, you don't need to use the router to connect to the two computers, you first use the original desktop computer to connect to the Internet with the correct dial-up.

Open: Control Panel Performance and Maintenance Administrative Tools Event Viewer System.

When you first connect to the network, the first thing in the system is your telecom encrypted account, and the password remains the same. It will display + English or number + area name + ** number, the user's connection network information. This is your correct account number, which is the correct account number that the system automatically dials.

The second step is to set up the router, connect the two computers with the router and use IE to enter, enter **Yes. Generally, the username and password of the router are admin. Go to the setup wizard and set a dial-up username with the account number and original password generated by the event viewer.

In it, it is set to automatically dial the number when it is turned on and disconnected.

The third step is to set the IP. Open Network Neighbors View Network Connections Local Connection Properties Internet Protocol Properties Automatically Get IP, DNS Address Option Select OK.

Ok, what's the question hi

**Line. Pick up the cat. The modem is connected to the WAN port of the router.

The two machines are connected to any two of the four LAN ports.

Then follow the instructions to set up the router.

Or the cat is directly connected to the LAN port like the computer. Then dial on any computer.

Broadband is put? Just buy a wireless router and connect both computers.

Go to the 'Neighbors' option and select 'Set up a wireless network for your home or small office' and it should work!

No router can, but there must be a switch, to ensure that the two computers and the external network line are connected, and then the computers are also connected, so there must be a switch.

Then set up ICS sharing Internet access mode in one computer, set the IP address on the other computer, the subnet mask is, the gateway is, and the DNS is the DNS address of your province, if you don't know, you can ask the operator. After setting up, the computer that dials the dial will dial first, and then the two computers will be able to access the Internet.

You're connected like this, and the fact that your desktop can access the Internet means that your router is almost set up, and you only need to set it up in 2 more steps.

1. Enter the router management page, there is a DHCP option in it, choose to turn on DHCP2, and set the IP address to automatically obtain on the Win7 computer. Windows7 sets up the way to automatically obtain the IP address as follows: click on the control panel, select the Network and Sharing Center, click on the "Local Connection" in the Network and Sharing Center to pop up the local connection status, and then select "Properties", we will see the familiar interface, double-click "IPv4", select Automatically obtain IP address, and automatically obtain the DNS server address.

Then you'll have access to both of them.

Connect the cat's computer cable to the router.

Then use a network cable to connect the router to the computer.

First of all--- the plug of the cat is plugged into the router--- and the two ends of the network cable are connected to the crystal head, one end is connected to the computer and the other end is connected to the router

I'm sorry. I forgot that I took it before. You can find a professional to come and get it for you.

You set the IP in the local connection on the win7 book to:

The gateway should be set to be fine.

If you are using a wireless router to dial up the Internet, the laptop has a wireless network card, you can directly connect to the wireless network, if the router opens DHCP (automatic IP address assignment), set the wireless network card of the notebook to automatically obtain IP, connect to the wireless network can be on, if the router does not open DHCP, according to the IP of your desktop, only change the last number, for example, your desktop IP is, then you can set the notebook IP to be any one from 2 to 254, Don't repeat it with others).You are not clear enough, I can only do this, you tell me the specific situation and requirements, I can help you think about it.