How to make two computers share ADSL Internet access, urgent! 15

Let's restore the router to its default settings. Then the LAN port of the router is connected to the network, and the other 4 are connected to 2 computers at will. One dial-up is fine, and the other is automatically on. Set it to automatically obtain IP addresses and enable DHCP.

Check to see if the router has an autodialing feature If so, turn on autodialing.

If you don't have one, you can only buy a network card and install it on the machine connected to the router.

I connected the network card I bought to the machine that I wanted to access the Internet.

Just set the gateway of the machine that you want to access to the Internet to the new network card and the IP address.

TP-Link R402M I remember filling in your Internet username and password in the PPP, and then setting the gateway in the LAN. ADSL dialing is set to automatic (if you are a monthly subscriber), and the gateways of the two machines are pointed to the router. There shouldn't be any overly complicated movements to do.

If you are not clear, you can refer to the manual of the router, which should talk about how to dial up the Internet.

Save the username and password in the PPPoE of the router to automatically connect, enable DHCP, and enable the automatic IP assignment function. The machine is set to automatically obtain the IP, so you don't need to dial up again.

ADSL Rookie First Acquaintance Use ADSL to share the Internet.

There are few users who do not use ADSL broadband to share the Internet, ADSL to share the Internet mainly has the following methods: (specific LAN formation method can refer to other articles on this site) Ethernet ADSL sharing with routing ADSL modem of Ethernet interface generally has built-in PPPoE virtual dialing software, with the function of routing and firewall, as long as it is connected to a switch or hub, it can be easily built without a server and multi-machine Internet access. Under.

You're right, you want to buy a router, and use one of the computers to set up the router, and then connect the other computer to the router, and assign the IP to let the two computers access the Internet at the same time.

Sell a router, you need to be able to allocate network resources, that is, limit the network speed, and then follow the instructions to do it.

When you buy a router, let someone else teach you how to do it.

Buy another router, connect it correctly and set it up, the routing manual has a detailed description.

Step 1: Turn on guest mode.

1. Right-click on the computer and select Manage.

2. Open the computer management, and then system tools - > local users and groups - > users.

3. You can see all users on the right side, generally there is a guest account, if not, please add one, we right-click guest and click on the property, and then remove the "account disabled" checkbox, click OK. At the same time, you can set a login password.

Step 2: Enable network discovery and disable password protection.

1. Search for "Advanced Sharing Settings", enter the Advanced Sharing Settings interface, find the network of "Current Profile", and then check "Enable Network Discovery" and "Enable File and Printer Sharing".

2. For all networks, check "Turn off password protection sharing", and then click Save Changes.

Step 3: Share the folder.

1. Right-click the folder to be shared, and click Share - > specific user.

3. Set read or write according to the permissions, and then click Share to complete.

Use the router and then set it up.

There is a manual for the specific how to set up the oak and can refer to it.

In addition, you also need two network cables, which are connected to two computers respectively, and how long are they.

Measure it yourself.

Two bends of the network cable should also be made of crystal heads. Next to the state.

First of all, you need to install one more network card, using dual network cards to share the Internet, pay attention to Ha, the network cable is a cross line, the two ends of the crystal head connection method is not the same, the following specific settings:

It is configured as a pair of two computers, operating system XP, host dual network cards, and slave single network cards.

Configure a local connection to Kai Pb 2:

Set the interner attribute to : IP and DNS are automatically obtained

Configure local connection: Internet property settings:

The IP address can be set to.

The subnet mask can be set to.

The default gateway is not specified.

DNS can be set to AND.

I choose Internet in Properties Advanced

Set up the Internet of the good slave to keep an eye on the liquid

Attribute. The IP address can be set to.

The subnet mask can be set to.

The default gateway is set to.

dns set.

Pay attention to the Internet

If you select all 3 options, the slave may automatically connect to the Internet after restarting.