The cabinet is moldy, what should I do? What should I do if the cabinet is moldy?

Why do cabinets always get moldy? When the wardrobe is moldy, pay attention to clean the moldy area first, and then use a paper towel or dry brush to wipe the moldy area. If the brush is not clean, wipe it vigorously with a damp cloth, which is often very convenient to remove mold.

If mold is found, wipe it clean with a cloth and apply a layer of varnish to protect it, which can effectively prevent mold from growing again. Mold is mostly caused by paint problems. So we can also clean the rainforest and wipe it off with a clean cloth.

When the air is moist, it is prone to mold.

You can also put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If the moisture in the wardrobe is too heavy, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep it dry. Mold entering our home can cause some respiratory diseases.

In order to avoid this, we can put some desiccant in the wardrobe, which can absorb the excess moisture in the wardrobe and make the wardrobe drier. At the same time, we can put some orange peel in the wardrobe, and we can also get the effect of clear taste and environmental protection, and we should pay attention to opening the window frequently for ventilation. After we usually mop the floor with a wet mop, we should also pay attention to opening the window for ventilation.

How to deal with wardrobe mildew: We can wipe the mildew with a clean rag and soak it in white vinegar or diluted bleach to thoroughly wipe the inside and outside of the cabinet, especially the place where mildew is easy to breed, in order to achieve the disinfection effect. After disinfection, let the wardrobe ventilate and dry, or use an electric fan to blow directly to speed up the air drying.

After three or four hours of air drying, you can continue to use it. When we look at the mold in the wardrobe, we first pay attention to cleaning up the moldy areas. Generally, you can wipe it with a dry paper towel or with a dry brush to clean up the moldy area.

If the cleaning is not clean, you can use a damp cloth to wipe vigorously, which is often very convenient to remove mold. If mold is found, in addition to wiping it off with a cloth, it is also necessary to brush the varnish again to effectively prevent the mold from growing again. The mold is mostly due to paint problems, so we can also clean it up with the rainforest and wipe it off with a clean cloth.

The air is humid and easy to mold, we can put some quicklime at home, which can effectively prevent dampness and disinfect. If the moisture in the wardrobe is too heavy, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.

What is the solution to wardrobe mold? When we find that the wardrobe is starting to get damp and moldy, the most direct way is to take out our clothes, open the window to ventilate the wardrobe, which can blow away the water vapor in the wooden wardrobe, or put a moisture absorbent dehumidifier in the cabinet to avoid the wardrobe. a wide variety of moisture; If the weather permits, you can also take your clothes out to dry to reduce the growth of mold.

Clean the moldy areas first, then put them in a dry place for ventilation before painting them with fresh paint.

How to deal with mold in the cabinet:

1. When we look at the mold in a wardrobe, we should first pay attention to cleaning up the moldy place, generally wipe it clean with a dry paper towel, or brush it with a dry brush to clean up the moldy place. If it is not clean, you can use a damp cloth If you find mold, in addition to wiping the mold with a cloth, we also need to brush the varnish on it again, so that it can effectively prevent mold from growing again. Mould is mostly caused by paint problems, so we can also use the rainforest to clean it and then wipe it with a clean cloth.

2. The air is humid and easy to mold, so we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If the humidity in the wardrobe is too heavy, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.

3. After mold, mold enters our home, which will cause some respiratory diseases, in order to prevent this, you can put some desiccant in the wardrobe, which can absorb the excess water in the wardrobe and make the wardrobe drier. At the same time, we can put some orange peel in the wardrobe, which can also play a refreshing and environmentally friendly effect, and at the same time, we should pay attention to the frequent opening of the window for ventilation, and try not to use a humidifier indoors to prevent excessive moisture and affect the use of the wardrobe.

When decorating a house, a wardrobe is indispensable, furniture is very practical, and in everyday life, many wardrobes have a lifespan of only a few years. Perhaps people only pay attention to appearance and volume when choosing a wardrobe, ignoring some important issues. Preference should be given to multi-partition wardrobes.

This type of wardrobe sorts clothes, pants, ties, is easy to find and easy to wear. For office workers, the festival of life quickly comes together to design a wardrobe that saves time. Otherwise, it would be a waste of time to look for this every day.

The choice of wardrobe doors, wardrobe doors, and there are generally two kinds of wardrobes, sliding doors and flat doors. Push and pull is convenient. Sliding door wardrobes have a shorter lifespan than flat door wardrobes.

There are many details in the interior decoration of the dressing room installed behind the wardrobe door, but in a small size house, if you put a mirror in the bedroom, it will definitely face the bed. Then when designing a wardrobe, install a mirror behind the wardrobe door, which can meet the requirements of looking at the mirror and save space at the same time. The wardrobe is best placed above the wardrobe.

If it is a selected finished product, if you don't hit the roof, you can buy a top cabinet to install it, and there is also the effect of hitting the roof. If it's a custom wardrobe, it's usually a tower design. We choose the most exclusive wardrobes to hide from dust and reduce the amount of work to be clean.

If the wardrobe is moldy, it may also be the wardrobe itself. When making cabinets, the wood is not completely dry, the surface is only filmed, and the wood is moldy during the air drying process.

Don't use paint board to make a wardrobe, the biggest advantage of paint board is that it does not need to be repainted after the finished product is completed, so it is a relatively environmentally friendly material, and it is also relatively cheap. Here to pay attention to the disadvantages of paint exemption boards. This situation indicates that the cabinet is wet in that location.

At least at first it was wet and the board was getting black. It's hard to change. Now, we can only wait until it's not wet before applying white paint.

The paint can be applied twice with white polyester paint. If the smell of paint is good, don't worry too much about it. Just apply the paint in the wardrobe.

It doesn't have much of an impact on people.

Put the desiccant or mothballs in the cupboard to keep it dry and absorb excess water, then wipe the mold with a cloth and then paint the cabinet will get a slight mold. After the cabinet has mold, first remove the moldy dirt with sandpaper, clean it with detergent, and then sprinkle it with anti-mold agent and repaint it. Cardboard boxes can be found at home and placed in an inconspicuous place in the room to prevent moisture and disinfect.

It can be opened at night or when it is very humid, the cause of cabinet mold Most of the cabinet mold is caused by the humidity of the surrounding environment, so pay attention to window ventilation in daily life, keep the surrounding environment dry, and do not use humidifiers at home.

If the cabinet is moldy, you should wipe the moldy part of the cabinet with a damp cloth, and then ventilate the cabinet after opening, and you can also put some activated carbon in the cabinet appropriately, which can also absorb the moisture in the cabinet.

First of all, we can clean up the inside, and then do a moisture-proof and mildew-proof treatment for the cabinet, you can put some sachets in the cabinet, you can put a layer of wax on the moldy place, dry it, and keep the room ventilated.

After finding that the cabinet is moldy, it is necessary to keep it ventilated, check whether there is a water source next to the cabinet, stay away, if it is damp outside, close the window and put some moisture remover in the cabinet.

If there is mildew in the cabinet, you can use a rag dipped in baking soda to wipe the mildew to remove the mildew on the surface, and then apply a layer of paint to maintain a good ventilation environment.

1. Baking soda

If there is mold in the cabinet, you can use a clean cloth to soak it in baking soda solution, wipe the moldy part, and finally rinse it with water to effectively remove the mold in the cabinet.

2. Apply paint

After wiping, you can brush a layer of paint on it, which can effectively prevent the cabinet from growing mildew, and it is necessary to maintain a ventilated environment and maintain the dryness of the room to avoid the regeneration of mildew.

3. Dehumidifier

In order to avoid the cabinet being too wet, you can place several dehumidifiers in the cabinet to absorb the moisture in the cabinet, keep it in a dry environment, and replace it regularly every once in a while.

1. First of all, once you find that there are mold spots on the surface of the cabinet, take out the clothes in time, open the cabinet door for ventilation, and let the moisture in the cabinet be eliminated in time;

2. Remove the cabinet and check whether the wall is damp, an important reason for the mold of the cabinet is caused by the dampness of the wall on the back of the cabinet, and there is a water source on the other side of the wall.

3. If the cabinet is moldy, it is likely to be due to the poor environment of the kitchen, which causes the cabinet to be in a humid environment for a long time, so if you want to completely solve it, you have to find a way to dry the kitchen, open the window for ventilation, and for families without windows in the kitchen, the kitchen door should be left open for a long time and let it dry naturally;

4. Secondly, put some desiccant in the cabinet, when the desiccant absorbs a certain amount of moisture, take it out to dry, and then put it back in until the cabinet is completely dry, or place a small fan in the cabinet to dry the moisture;

5. If the moisture is relatively large and the above methods cannot solve the problem, then it is necessary to consider doing waterproof treatment on the damp wall, pasting waterproof materials, and needing to shovel off the damp wall paint, and re-repair the putty to brush the waterproof paint, and the effect will be better if you brush it several times.

If the mold inside the cabinet needs to be pat with a rag and dip it in soapy water to wipe off the mildew, open the cabinet door for ventilation for 1 2 days, and then brush on a layer of anti-mildew paint, which can effectively prevent mildew, and so the smell volatilizes, you can put the clothes in, and then place a few absorbent bags in it to keep a dry environment and avoid mold spots in the cabinet again.

1. Remove mildew

If there is mold in the cabinet, you need to move the clothes out, and wipe the mildew with a rag dipped in soapy water, and the whole process needs to be wiped three times, which can effectively remove the mildew, and baking soda also has the same effect of removing mildew.

2. Open windows for ventilation

It is necessary to open the door of the clothes to ventilate the cabinet, keep it for 1 2 days, and then brush a layer of anti-mildew paint, and then brush a layer after drying, which is effective to prevent mildew, and when the smell volatilizes, you can put the clothes in.

3. Absorbent bag

In order to avoid the cabinet from becoming moldy or smelly again, you can place several absorbent bags in the cabinet and hang them directly on the shelf, which can absorb the moisture in the cabinet, maintain a dry environment, and avoid mildew breeding.

Cleaning method: When cleaning, you should use a dry rag brush to enter the macro chai line treatment, if you can't wipe it off with a dry one, wipe it with a wet rag, the rag must be wrung out of the water as much as possible, but it is not recommended to use a wet brush to clean up, so it is easy to hurt the internal structure of the wood, plus it is wet, it is easy to soak the inside, if it is not completely dried, it will be easy to grow mold.

When the cabinet is completely cleaned, it is best to place it in a ventilated place to dry completely, and do not rush to put the clothes back in. Wait until it is completely dry and apply a layer of paint or wax to the cabinet.

Prevents mold from growing again. Then put some desiccant (powder) and activated carbon in the cabinet to keep the cabinet dry.

1. If the cabinet is moldy, if it is not particularly serious, you can prepare a clean rag first, scrub the moldy part of the cabinet, and then put some desiccant or mothballs in the cabinet. The moisture in the cabinet is absorbed and the mothballs are used to kill the eggs in the cabinet, and finally the protective paint is applied to the countertop.

2. If the mold of the cabinet is more serious, then you need to use sandpaper to clean up all the mold on the cabinet, and then use the antifungal agent to spray the cabinet as a whole, after spraying, close the cabinet door tightly, let the mold remover kill all the eggs in the cabinet, and then wait for the cabinet to dry naturally, re-polish, polish, and apply paint.