What to do if the basketball is moldy How to clean the basketball if it is moldy

I can only tell you some common sense about maintenance.

1.Do not expose to the sun; Less water, if it gets dirty, it's fine, don't wash with water; When pumping, the stomata get some water to prevent friction and heat; Basketball is not football, don't use it as a question.

Another point is that many friends often take the basketball to sit on the sidelines and use it as a stool, which is very lethal to the basketball, and it is easy to deform the basketball.

You can shoot hard, pass hard, grab rebounds hard, and it's okay to use as much force as you want in a normal game, but you can't smash the ball too hard, otherwise the basketball won't listen to you.

Choose an outdoor ball (oudoor) or an indoor ball (indoor) depending on the place of useGenerally, indoor balls are used for smooth venues such as wooden floors, plastic floors, and water mills, that is, basketballs with more PU content; Outdoor basketball is used on concrete courts, street basketball courts and dirt floors.

2.Regularly check the inflation saturation of the basketball and not be too saturated. Zhenguan inspection method: Raise the basketball straight hand to the top of the head, gently put the basketball on the ground, and bounce it to the chest, indicating that the inflation is appropriate; If it bounces in front of you, it means that the inflation is too full; On the contrary, it means that the qi is insufficient.

3.Pay attention to the temperature and humidity of the basketball storage area, and do not put it in a hot place, such as a hot and airtight car box. After use, it is better not to wash the basketball with water, but to wipe it with a dry cloth.

4.If you do not apply high-pressure gravity to the basketball, it will cause the basketball liner to deform and burst, such as sitting on the basketball when you are free.

5.When pumping, moisten the needle with oil or water before gently inserting it into the inner tank. Be sure to use a ball needle to pump inflat, if you only use a pump, it will cause the epidermis to separate from the inner tank.

You can't use water, just take it out to dry, and the gas can't be very sufficient, so as not to be sunburned! If it really doesn't work, then it's just a matter of mourning, brother!

Wipe clean with a damp cloth and be careful not to get water. If you don't deform, it's in vain.

It's good to fight often, don't let the mold continue to expand, and the surface will be covered by dust after a dozen, so don't stick to the level.

Take out the basketball and play it. Hit and it was solved. If I were the mustachioed sneaker owner in "Slam Dunk", I wouldn't sell the ball to you, and I wouldn't use it for a collection of such expensive balls. The real good ball is used in the stadium (such an expensive ball is played in the infield, of course).

Scrape it off with a knife, and then glue it to find something to glue, so that you can also hit it.

If you can't fix it, buy a new one, it's really not good, you can make this ball deal with it first. I feel unfortunate and sad for you.

Just rub it off, I've been in this situation with my basketball, it's fine.

Brush clean with a brush and let out in the sun.

Put it in a dry and ventilated place, your place must be too damp, so it is moldy.

If it's leather.

Don't think about it. Let's change it

If you can't get it off, it's rubber

Just brush, but you try brushing.

The important thing is that black spots are very difficult to get rid of!

I'm going to advise you to get a new one, it's sad, I've never been in this situation, and you didn't have that in 2008.

Just like you would with moldy food, you can do it yourself.

It's better to buy 10 balls for 100 yuan......Identification completed.

Valuable to keep!

No basketball. No bro!

It would be nice to take it out and play for a few more days.

Hello, I hope my solution can help you. (1) Brush with a soft brush first, and then rub with alcohol to remove mildew. (2) Repeatedly brush the stall with thick soapy water and wash it, and the mildew can be removed.

3) Knead the potatoes with mung bean sprouts, and then rinse with water to remove mildew.

If it is white canvas shoes, it is best to wash them with bleach, which is both bleaching and disinfecting; Cotton fabrics with mildew can be dried at the tuyere first, and then removed by a brush after drying.

The mildew spots of satin shoes can be gently removed with a fluffy cloth or towel, and the large spots need to be sprayed on the silk with ammonia, and then ironed with tools; The mildew stains of the white satin are slowly wiped off with alcohol. Mold on shoes made of chemical fiber is washed off with soapy water and then wiped clean with warm water. Hemp shoes can be brushed with calcium chloride solution.

Another method is to put the fresh mung bean sprouts on the moldy place, rub hard, so that the color changes a lot, and then rub a few times, the effort pays off, the mildew is gone, and finally wash it with water, it's as simple as that, the problem is solved.

The mildew on the shoes can be exposed to the sun first, and then the hairy area can be removed with a brush, and then cleaned with alcohol; Soak the problem shoes in thick soapy water, take them out with soapy water, let them dry in the sun for a while, and dry them many times repeatedly, until the mildew is removed, and then rinse them with clean water.

There is also a key point that needs to be paid attention to, that is, to separate the moldy shoes from the non-moldy shoes to avoid the mutual infection of mold, and then the moldy shoes should be removed from the mold stains with a brush as soon as possible, and then wiped with a light damp cloth and then dried; Finally, spray with antifungal agent. After 1-2 minutes, dry the leather shoes after drying, and put a package of moisture-proof dry material when packing, so as to avoid mildew again.

If you have any questions, please feel free to contact me.